https://github.com/sebva/stress-sgx

Stress-SGX is a fork of stress-ng that allows to put Intel SGX enclaves under high load.
https://github.com/sebva/stress-sgx

benchmark load sgx stress stress-ng

Last synced: 1 day ago
JSON representation

Stress-SGX is a fork of stress-ng that allows to put Intel SGX enclaves under high load.

• Host: GitHub
• URL: https://github.com/sebva/stress-sgx
• Owner: sebva
• License: gpl-2.0
• Created: 2017-11-23T09:10:41.000Z (over 6 years ago)
• Default Branch: master
• Last Pushed: 2018-08-21T12:19:56.000Z (almost 6 years ago)
• Last Synced: 2024-02-29T02:36:01.820Z (4 months ago)
• Topics: benchmark, load, sgx, stress, stress-ng
• Language: C
• Homepage:
• Size: 3.45 MB
• Stars: 16
• Watchers: 4
• Forks: 7
• Open Issues: 2
• Metadata Files:
  • Readme: README
  • License: COPYING

Lists

• Awesome-SGX-Open-Source - https://github.com/sebva/stress-sgx

README

        
stress-ng

stress-ng will stress test a computer system in various selectable ways. It

was designed to exercise various physical subsystems of a computer as well as

the various operating system kernel interfaces. Stress-ng features:

  * over 180 stress tests

  * over 50 CPU specific stress tests that exercise floating point, integer,

    bit manipulation and control flow

  * over 20 virtual memory stress tests

stress-ng was originally intended to make a machine work hard and trip hardware

issues such as thermal overruns as well as operating system bugs that only

occur when a system is being thrashed hard. Use stress-ng with caution as some

of the tests can make a system run hot on poorly designed hardware and also can

cause excessive system thrashing which may be difficult to stop.

stress-ng can also measure test throughput rates; this can be useful to observe

performance changes across different operating system releases or types of

hardware. However, it has never been intended to be used as a precise benchmark

test suite, so do NOT use it in this manner.

Running stress-ng with root privileges will adjust out of memory settings on

Linux systems to make the stressors unkillable in low memory situations, so use

this judiciously. With the appropriate privilege, stress-ng can allow the ionice

class and ionice levels to be adjusted, again, this should be used with care.

To build, the following libraries will ensure a fully functional stress-ng

build:

  * libaio-dev

  * libapparmor-dev

  * libattr1-dev

  * libbsd-dev

  * libcap-dev

  * libgcrypt11-dev

  * libkeyutils-dev

  * libsctp-dev

  * zlib1g-dev

NOTE: the build will try to detect build depedencies and will build an image with

functionality disabled if the support libraries are not installed.

To build on BSD systems, one requires gcc and GNU make:

        CC=gcc gmake clean

	CC=gcc gmake

To build on OS X systems, just use:

	make clean

	make

To build on MINIX, gmake and clang are required:

	CC=clang gmake clean

	CC=clang gmake 

To build on SunOS, one requires GCC and GNU make, build using:

	CC=gcc gmake clean

	CC=gcc gmake

To build a static image (example, for Android), use:

	make clean

	STATIC=1 make

To build with full warnings enabled:

	make clean

	PEDANTIC=1 make

For more information, see: http://kernel.ubuntu.com/~cking/stress-ng/