https://github.com/vroland/MyoBridge

A high-level Arduino library and custom firmware for the HM-11 (CC2541 SoC) to enable direct Myo Armband and Arduino communication.
https://github.com/vroland/MyoBridge

Last synced: about 19 hours ago
JSON representation

A high-level Arduino library and custom firmware for the HM-11 (CC2541 SoC) to enable direct Myo Armband and Arduino communication.

• Host: GitHub
• URL: https://github.com/vroland/MyoBridge
• Owner: vroland
• Created: 2015-09-30T05:34:43.000Z (over 8 years ago)
• Default Branch: master
• Last Pushed: 2019-02-01T00:37:07.000Z (over 5 years ago)
• Last Synced: 2024-03-05T21:33:14.989Z (4 months ago)
• Language: C
• Size: 6.9 MB
• Stars: 78
• Watchers: 16
• Forks: 25
• Open Issues: 4
• Metadata Files:
  • Readme: README.md

Lists

• awesome-stars - MyoBridge - level Arduino library and custom firmware for the HM-11 (CC2541 SoC) to enable direct Myo Armband and Arduino communication. | vroland | 65 | (C)

README

        
# MyoBridge

A high-level Arduino library and custom firmware for the HM-11 (CC2541 SoC) to enable direct Myo Armband and Arduino communication.

Please visit the [wiki](https://github.com/vroland/MyoBridge/wiki) for more information.

# Concept of MyoBridge

![MyoBridge Concept](https://raw.githubusercontent.com/wiki/vroland/MyoBridge/images/wiki/mbconcept.png)

The Myo Gesture Control Armband features gesture recognition, motion tracking and muscular activity measurement. 

This data is very useful in various applications, since sensor data and events are sent wirelessly through a Bluetooth Low Energy

connection to a host device and no complex wiring is required. Especially embedded systems can profit from the portability 

of the device, like the Arduino platform. Unfortunately, most BLE hardware has a very limited feature set, none of the

available BLE modules could directly connect to the Myo Armband out of the box. 

But this can be solved by developing a custom firmware for these modules, which then provides access to the Myo data

and delivers it to another device, like an Arduino. The **MyoBridge Firmware** fits exactly this purpose. 

It is a custom firmware for the HM-11 BLE Module, which uses the Texas Instruments CC2541 Bluetooth LE System on a Chip. 

When the MyoBridge is connected to a Myo Gesture Control Armband, the Arduino can send commands or receive

sensor data from the Myo using the MyoBridge library. The communication between HM-11/MyoBridge and Arduino uses

a simple two-wire serial connection, while the HM-11 module connects directly to the Myo Armband.

**When using the Arduino library, you can easily read data from the Myo, without the need of any intermediate

PC or phone.**

You want to use the MyoBridge Firmware? [Get Started!](https://github.com/vroland/MyoBridge/wiki/Getting-Started-with-MyoBridge-Firmware)