https://github.com/knolleary/pubsubclient

A client library for the Arduino Ethernet Shield that provides support for MQTT.
https://github.com/knolleary/pubsubclient

Last synced: 4 months ago
JSON representation

A client library for the Arduino Ethernet Shield that provides support for MQTT.

• Host: GitHub
• URL: https://github.com/knolleary/pubsubclient
• Owner: knolleary
• License: mit
• Created: 2009-02-02T11:07:58.000Z (over 15 years ago)
• Default Branch: master
• Last Pushed: 2023-12-10T17:55:27.000Z (7 months ago)
• Last Synced: 2024-01-15T22:21:22.955Z (5 months ago)
• Language: C++
• Homepage: http://pubsubclient.knolleary.net/
• Size: 306 KB
• Stars: 3,691
• Watchers: 210
• Forks: 1,446
• Open Issues: 539
• Metadata Files:
  • Readme: README.md
  • Changelog: CHANGES.txt
  • License: LICENSE.txt

Lists

• awesome-iot - PubSub Client ★ 684 ⧗ 0 - A client library for the Arduino Ethernet Shield that provides support for MQTT. (Protocol Library / MQTT)
• Awesome-arduino - pubsubclient - A client library for the Arduino Ethernet Shield that provides support for MQTT (Libraries)
• awesome-arduino - pubsubclient - A client library for the Arduino Ethernet Shield that provides support for MQTT (Libraries)
• awesome-stars - pubsubclient
• awesome-stars - knolleary/pubsubclient - A client library for the Arduino Ethernet Shield that provides support for MQTT. (C++)
• awesome-stars - pubsubclient
• awesome-iot-master - PubSub Client ★ 684 ⧗ 0 - A client library for the Arduino Ethernet Shield that provides support for MQTT. (Protocol Library / CoAP)
• awesome_iot - PubSub Client ★ 684 ⧗ 0 - A client library for the Arduino Ethernet Shield that provides support for MQTT. (Protocol Library / MQTT)

README

        
# Arduino Client for MQTT

This library provides a client for doing simple publish/subscribe messaging with

a server that supports MQTT.

## Examples

The library comes with a number of example sketches. See File > Examples > PubSubClient

within the Arduino application.

Full API documentation is available here: https://pubsubclient.knolleary.net

## Limitations

 - It can only publish QoS 0 messages. It can subscribe at QoS 0 or QoS 1.

 - The maximum message size, including header, is **256 bytes** by default. This

   is configurable via `MQTT_MAX_PACKET_SIZE` in `PubSubClient.h` or can be changed

   by calling `PubSubClient::setBufferSize(size)`.

 - The keepalive interval is set to 15 seconds by default. This is configurable

   via `MQTT_KEEPALIVE` in `PubSubClient.h` or can be changed by calling

   `PubSubClient::setKeepAlive(keepAlive)`.

 - The client uses MQTT 3.1.1 by default. It can be changed to use MQTT 3.1 by

   changing value of `MQTT_VERSION` in `PubSubClient.h`.

## Compatible Hardware

The library uses the Arduino Ethernet Client api for interacting with the

underlying network hardware. This means it Just Works with a growing number of

boards and shields, including:

 - Arduino Ethernet

 - Arduino Ethernet Shield

 - Arduino YUN – use the included `YunClient` in place of `EthernetClient`, and

   be sure to do a `Bridge.begin()` first

 - Arduino WiFi Shield - if you want to send packets > 90 bytes with this shield,

   enable the `MQTT_MAX_TRANSFER_SIZE` define in `PubSubClient.h`.

 - Sparkfun WiFly Shield – [library](https://github.com/dpslwk/WiFly)

 - TI CC3000 WiFi - [library](https://github.com/sparkfun/SFE_CC3000_Library)

 - Intel Galileo/Edison

 - ESP8266

 - ESP32

The library cannot currently be used with hardware based on the ENC28J60 chip –

such as the Nanode or the Nuelectronics Ethernet Shield. For those, there is an

[alternative library](https://github.com/njh/NanodeMQTT) available.

## License

This code is released under the MIT License.