Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/vsolina/micropython-web-editor
Web-based code editor (IDE) for MicroPython controllers with WiFi
https://github.com/vsolina/micropython-web-editor
embedded esp32 ide micropython programming pyboard
Last synced: 3 months ago
JSON representation
Web-based code editor (IDE) for MicroPython controllers with WiFi
- Host: GitHub
- URL: https://github.com/vsolina/micropython-web-editor
- Owner: vsolina
- License: mit
- Created: 2022-09-30T17:07:11.000Z (over 1 year ago)
- Default Branch: master
- Last Pushed: 2023-05-30T12:31:04.000Z (about 1 year ago)
- Last Synced: 2024-01-18T09:43:49.604Z (5 months ago)
- Topics: embedded, esp32, ide, micropython, programming, pyboard
- Language: Python
- Homepage:
- Size: 1 MB
- Stars: 19
- Watchers: 3
- Forks: 3
- Open Issues: 13
-
Metadata Files:
- Readme: README.md
Lists
- awesome-stars - vsolina/micropython-web-editor - Web-based code editor (IDE) for MicroPython controllers with WiFi (Python)
README
MicroPython web code editor / IDE
=================================
Web-based code editor for WiFi + MicroPython enabled microcontrollers
Uses [Cloud9 Ace](https://ace.c9.io/) editor for code editing
Has an integrated WebREPL console
Developed and tested on ESP32, but should work on other boards too
Installation
------------
1. Flash a recent version (1.17+) of MicroPython to your Controller (http://micropython.org/download)
2. Copy contents of /weditor and lib/microWebSrv.py to the root of Controller's file system
```
$ cd micropython-web-editor
$ ampy --port /dev/ttyUSB0 put weditor /weditor
$ ampy --port /dev/ttyUSB0 put lib /lib
```
3. Setup WebREPL (optional)
On your Controller run:
```
import webrepl_setup
```
4. Update boot.py
```python
print("Activating network")
import network
wlan = network.WLAN(network.STA_IF)
wlan.active(True)
wlan.connect('YOUR_SSID', 'YOUR_PASS')
print("Starting webrepl")
import webrepl
webrepl.start()
print("Starting IDE web service")
import weditor.start
```
5. Reboot Controller
6. Open controller's IP in your browser (make sure to use http:// scheme - https not supported)
7. Have a nice day
Install shell for MicroPython (optional)
----------------------------------------
For easier file system operations (mv, rm, mkdir, df, etc.)
[MicroPython shell](https://github.com/vsolina/mipyshell) - instructions on this page
Bundled open-source projects
----------------------------
*This project would not be possible without these exceptional projects*
[Cloud9 Ace code editor](https://github.com/ajaxorg/ace)
[MicroWebSrv](https://github.com/jczic/MicroWebSrv/)
[MicroPython's WebREPL](https://github.com/micropython/webrepl)
[And most importantly: MicroPython](https://github.com/micropython)
Notes
-----
* File saving does not work well with large files yet
* This editor was mostly written and debugged using itself
* esp8266 does not have enough RAM to run all required components (yet)
* When using the IDE, Internet connection is required because Ace is hosted on cdnjs (to reduce storage requirements); but it's possible to bundle required ace.js files on Controller's flash (raise an Issue and I'll explain how to do it)