https://github.com/lomalkin/flipperzero-protoboards-kicad

Unofficial protoboards for Flipper Zero, designed in KiCAD.
https://github.com/lomalkin/flipperzero-protoboards-kicad

Last synced: 10 days ago
JSON representation

Unofficial protoboards for Flipper Zero, designed in KiCAD.

• Host: GitHub
• URL: https://github.com/lomalkin/flipperzero-protoboards-kicad
• Owner: lomalkin
• Created: 2022-01-29T17:03:24.000Z (over 2 years ago)
• Default Branch: master
• Last Pushed: 2022-01-29T17:24:40.000Z (over 2 years ago)
• Last Synced: 2024-02-13T21:47:22.647Z (4 months ago)
• Size: 2.65 MB
• Stars: 78
• Watchers: 1
• Forks: 9
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Lists

• awesome-flipperzero-withModules - `FlipperZero-Protoboards-Kicad` KiCad prototype boards.
• awesome-flipperzero - `FlipperZero-Protoboards-Kicad` KiCad prototype boards.
• awesome-flipperzero - `FlipperZero-Protoboards-Kicad` KiCad prototype boards.
• awesome-flipperzero - `FlipperZero-Protoboards-Kicad` KiCad prototype boards.
• awesome-flipperzero - `FlipperZero-Protoboards-Kicad` KiCad prototype boards.
• fucking-awesome-flipperzero - `FlipperZero-Protoboards-Kicad` KiCad prototype boards.

README

        
# Flipperzero prototyping boards

Here is the repo with KiCAD projects with prototyping PCB for Flipper Zero.

---

**It was designed after lockup of Flipper Zero GPIO pinout, so has actual compatibility, but not supported officially for now.**

**Please use official [external module guidelines](https://docs.flipperzero.one/ru/development/ext-modules) for new developments.**

**Unofficial KiCAD FlipperZero component can be found [here](https://bitbucket.org/lomalkin/lomalkin_kicad_libs/src/master/lomalkin_kicad_footprints.pretty/FlipperZero.kicad_mod).**

---

## Flipper-protoboard

**Not recommended for production as is.**

![flipper-pb](flipper-pb/flipper-pb.png?raw=true)

* FlipperZero conenector (horizontal PLS 2.54)

* Capacitors (Tantalum type C, 0603) on both 3.3 and 5V power lines

* SWD socket (ST-discovery style, without reset line)

* 8 LEDs on GPIO pins (can be powered from 5V or 3.3V lines or switched-off)

* UART connector (with adjustable power 5V/3.3V)

* Four grounded mounting holes (M3, d3.2mm)

* Free space filled with 2.54mm pitch thru-hole pads (d0.9 mm)

## Flipper-zen

![flipper-zen](flipper-zen/flipper-zen.png?raw=true)

* FlipperZero connector (horizontal PLS 2.54) and more space for prototyping.