Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/przemobe/micropy-ENC28J60
ENC28J60 Ethernet chip driver for MicroPython (RP2)
https://github.com/przemobe/micropy-ENC28J60
enc28j60 ethernet micropython rp2040
Last synced: 2 months ago
JSON representation
ENC28J60 Ethernet chip driver for MicroPython (RP2)
- Host: GitHub
- URL: https://github.com/przemobe/micropy-ENC28J60
- Owner: przemobe
- License: gpl-3.0
- Created: 2021-12-25T23:10:49.000Z (over 2 years ago)
- Default Branch: main
- Last Pushed: 2024-01-14T23:54:47.000Z (6 months ago)
- Last Synced: 2024-01-29T20:34:31.894Z (5 months ago)
- Topics: enc28j60, ethernet, micropython, rp2040
- Language: Python
- Homepage:
- Size: 75.2 KB
- Stars: 17
- Watchers: 4
- Forks: 6
- Open Issues: 1
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Lists
- awesome-micropython - micropy-ENC28J60 - ENC28J60 Ethernet chip driver for MicroPython (RP2). (Libraries / Communications)
README
# micropy-ENC28J60
ENC28J60 Ethernet chip driver for MicroPython v1.17 (RP2)
## Rationale
ENC28J60 is a popular and cheap module for DIY projects.
At the moment, however, there is no driver for the MicroPython environment.
The Python implementation seems easy for further improvements and self adaptation.
## Installation
Copy enc28j60.py to your board into /enc28j60 directory.
## Wiring
Wiring requires pins for SPI: SCK, MISO, MOSI and ChipSelect and optionally Interrupt.
Example wiring that uses SPI1 bus (any SPI bus can be used):
| ENC28J60 Module | RP2040 Board | Notes |
| :-------------: |:-------------:| ---- |
| VCC | 3V3 | requires up to 180 mA |
| GND | GND | |
| SCK | GP10 | SPI1 SCK |
| SI | GP11 | SPI1 MOSI/TX |
| SO | GP8 | SPI1 MISO/RX |
| CS | GP13 | SPI1 CSn |
| INT | GP15 | Optional |
## To do
- interrupt handler
## Example code
### Packet transmission
Example of packet transmission to broadcast ethernet address:
```python
from machine import Pin, SPI
from enc28j60 import enc28j60
spi1 = SPI(1, baudrate=10000000, sck=Pin(10), mosi=Pin(11), miso=Pin(8))
eth = enc28j60.ENC28J60(spi1, Pin(13))
eth.init()
srcMac = eth.getMacAddr()
tgtMac = bytearray([0xFF,0xFF,0xFF,0xFF,0xFF,0xFF])
payLoad = bytearray(64)
pktType = bytearray([(len(payLoad) >> 8) & 0xFF, len(payLoad) & 0xFF])
eth.SendPacket([tgtMac, srcMac, pktType, payLoad])
```
### Packet reception
Example of packet reception:
```python
from machine import Pin, SPI
from enc28j60 import enc28j60
spi1 = SPI(1, baudrate=10000000, sck=Pin(10), mosi=Pin(11), miso=Pin(8))
eth = enc28j60.ENC28J60(spi1, Pin(13))
eth.init()
print("myMac:", ":".join("{:02x}".format(c) for c in eth.getMacAddr()))
print("ENC28J60 revision ID: 0x{:02x}".format(eth.GetRevId()))
rxBuf = bytearray(enc28j60.ENC28J60_ETH_RX_BUFFER_SIZE)
while eth.GetRxPacketCnt():
rxLen = eth.ReceivePacket(rxBuf)
print('rxLen:', rxLen, 'srcMac:', ":".join("{:02x}".format(c) for c in rxBuf[6:12]))
```
### IPv4 simple suite for polling mode
Please refer to examples/Ntw.py file for details.
The file contains roughly written procedures for handling IP protocols in polling mode:
- IPv4 for not fragmented packets only, single static IP address
- ARP for IPv4 over Ethernet, simple ARP table
- ICMPv4: rx Echo Request and tx Echo Response
- UDPv4: rx and tx
- Simple UDP Echo server
MicroPython v1.17 for Raspberry Pi Pico does not include socket library.
It also does not allow to run more than 2 threads at the time.
It is hard to mimic network sockets in such environment. So polling mode seems reasonable solution.
```python
from machine import Pin
from machine import SPI
import Ntw
if __name__ == '__main__':
# Create network
nicSpi = SPI(1, baudrate=10000000, sck=Pin(10), mosi=Pin(11), miso=Pin(8))
nicCsPin = Pin(13)
ntw = Ntw.Ntw(nicSpi, nicCsPin)
# Create UDP Echo server
udpecho = Ntw.Udp4EchoServer(ntw)
# Bind UDP Echo server to UDP port 7
ntw.registerUdp4Callback(7, udpecho)
# main loop
while True:
# Receive and process packets
ntw.rxAllPkt()
```