Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

https://github.com/ehong-tl/micropySX126X

Semtech SX126X LoRa driver for Micropython and CircuitPython.
https://github.com/ehong-tl/micropySX126X

circuitpython lora micropython radio sx1261 sx1262 sx1268 sx126x

Last synced: 2 months ago
JSON representation

Semtech SX126X LoRa driver for Micropython and CircuitPython.

Host: GitHub
URL: https://github.com/ehong-tl/micropySX126X
Owner: ehong-tl
License: mit
Created: 2020-03-16T08:28:20.000Z (over 4 years ago)
Default Branch: master
Last Pushed: 2023-10-25T22:10:13.000Z (8 months ago)
Last Synced: 2024-01-29T20:35:06.027Z (5 months ago)
Topics: circuitpython, lora, micropython, radio, sx1261, sx1262, sx1268, sx126x
Language: Python
Homepage:
Size: 152 KB
Stars: 71
Watchers: 4
Forks: 19
Open Issues: 11
Metadata Files:
- Readme: README.md
- License: LICENSE

Lists

awesome-micropython - micropySX126X - Semtech SX126X LoRa driver for MicroPython and CircuitPython. (Libraries / Communications)

README

# micropySX126X
Semtech SX126X LoRa driver for Micropython and CircuitPython.
This library is ported and modified from [RadioLib](https://github.com/jgromes/RadioLib) by jgromes.
This library supports generic and Pycom variant micropython as well as CircuitPython.
Tested with:
1. WiPy3.0 + Semtech SX1262MB1PAS shield (LoRa)
2. WiPy3.0 + Ebyte E22-400M22S (LoRa)
3. WiPy3.0 + Ebyte E22-400M30S (LoRa) - Built-in 10dB amplifier, eg. SX1268.setOutputPower(20) = 30dBm output, SX1268.setOutputPower(0) = 10 dBm output
4. [LilyGO® T-Echo](https://github.com/lyusupov/POST_TEcho)
5. Raspberry Pi Pico + [Waveshare SX126x Pico LoRa HAT](https://www.waveshare.com/pico-lora-sx1262-868m.htm)

## Constructors (Similar for SX1261 and SX1268)
***class*** **sx1262.SX1262(spi_bus, clk, mosi, miso, cs, irq, rst, gpio)**
Create and initialize SX1262 object.

The parameters are:
- spi_bus : SPI bus ID
- clk : SPI CLK pin
- mosi : SPI MOSI pin
- miso : SPI MISO pin
- cs : NSS pin
- irq : DIO1 pin
- rst : RESET pin
- gpio : BUSY pin

## Methods (Similar for SX1261 and SX1268)

### General
**SX1262.setFrequency(freq)**
Set frequency in MHz.
Return: Status (Refer to **Constants** Status dictionary)

**SX1262.setOutputPower(power)**
Set TX power in dBm.
Return: Status

**SX1262.setBlockingCallback(blocking, callback=None)**
Set TX/RX blocking mode and interrupt callback.
If blocking = True, TX/RX is set to blocking mode and callback function will be ignored.
If blocking = False, TX/RX is set to non blocking mode and callback function will be triggered with events argument upon TX/RX events.
If callback = None, events callback function will be disabled.

**SX1262.getRSSI()**
Get RX RSSI in dBm.
Return: RSSI value

**SX1262.getTimeOnAir(len)**
Get RX time on air according to message length, len = message length.
Return: Time on air value

**SX1262.send(data)**
Send message, data type must be bytes or bytearray.
Return: Payload length, status

**SX1262.recv(len=0, timeout_en=False, timeout_ms=0)**
Read RX message.
len = Message length, if 0, default to SX126X_MAX_PACKET_LENGTH
timeout_en = Enable RX timeout, if False, function blocking indefinitely until message received (Only in blocking mode)
timeout_ms = RX timeout in ms, 0 means timeout = 100 LoRa symbols length for LoRa or timeout = 500% expected time-on-air for FSK (Only in blocking mode)
Return: Payload, status

### LoRa
**SX1262.begin(freq=434.0, bw=125.0, sf=9, cr=7, syncWord=0x12, power=14, currentLimit=60.0
preambleLength=8, implicit=False, implicitLen=0xFF, crcOn=True, txIq=False, rxIq=False,
tcxoVoltage=1.6, useRegulatorLDO=False, blocking=True)**
This method is used to set LoRa configuration.

The parameters are:
- freq : Frequency in MHz
- bw : Bandwidth in kHz
- sf : Spreading factor, 5 to 12
- cr : Coding rate, 5 to 8
- syncWord : Sync word, private = 0x12, public = 0x34
- power : TX power in dBm
- currentLimit : Current limit in mA
- preambleLength : Preamble length
- implicit : Implicit or explicit header, implicit = True
- implicitLen : Implicit header payload length
- crcOn : CRC on or off
- txIq : TX invert IQ
- rxIq : RX invert IQ
- tcxoVoltage : TCXO input voltage in V
- useRegulatorLDO : Use LDO regulator = True, use DC-DC regulator = False
- blocking : Blocking TX/RX = True, non blocking TX/RX = False

Return: Status

**SX1262.setBandwidth(bw)**
Set LoRa bandwidth in kHz.
Return: Status

**SX1262.setCodingRate(cr)**
Set LoRa coding rate, 5 to 8.
Return: Status

**SX1262.setPreambleLength(preambleLength)**
Set LoRa preamble length.
Return: Status

**SX1262.setSpreadingFactor(sf)**
Set LoRa spreading factor, 5 to 12.
Return: Status

**SX1262.setSyncWord(syncWord, [controlBits])**
Set LoRa sync word, private = 0x12, public = 0x34.
Optional parameter controlBits, default value is 0x44.
e.g. syncWord = 0xAB, controlBits = 0xCD -> SX126x 2 bytes sync word = 0xACBD
e.g. syncWord = 0x12, controlBits = 0x44 -> SX126x 2 bytes sync word = 0x1424
Return: Status

**SX1262.explicitHeader()**
Enable LoRa explicit header mode.
Return: Status

**SX1262.implicitHeader(implicitLen)**
Enable LoRa implicit header mode with implicit length parameter.
Return: Status

**SX1262.forceLDRO(enable)**
Force enable Low Data Rate Optimization.
Return: Status

**SX1262.autoLDRO()**
Enable auto Low Data Rate Optimization.
Return: Status

**SX1262.setCRC(crcOn)**
Set LoRa CRC mode.
Return: Status

**SX1262.setTxIq(txIq)**
Set LoRa TX invert IQ mode.

**SX1262.setRxIq(rxIq)**
Set LoRa RX invert IQ mode.

**SX1262.getSNR()**
Get LoRa RX SNR in dB.
Return: SNR value

### FSK
**SX1262.beginFSK(freq=434.0, br=48.0, freqDev=50.0, rxBw=156.2, power=14, currentLimit=60.0,
preambleLength=16, dataShaping=0.5, syncWord=[0x2D, 0x01], syncBitsLength=16,
addrFilter=SX1262.ADDR_FILT_OFF, addr=0x00, crcLength=2, crcInitial=0x1D0F, crcPolynomial=0x1021,
crcInverted=True, whiteningOn=True, whiteningInitial=0x0100,
fixedPacketLength=False, packetLength=0xFF, preambleDetectorLength=SX1262.PREAMBLE_DETECT_16,
tcxoVoltage=1.6, useRegulatorLDO=False,
blocking=True)**
This method is used to set FSK configuration.

The parameters are:
- freq : Frequency in MHz
- br : Bit rate in kbps
- freqDev : Frequency deviation in kHz
- rxBW : RX bandwidth in kHz
- power : TX power in dBm
- currentLimit : Current limit in mA
- preambleLength : Preamble length
- dataShaping : Time-bandwidth product of the Gaussian filter to be used for shaping
- syncWord : Sync word
- syncBitsLength : Sync word length in bit
- addrFilter : Address filtering, refer to **Constants** FSK address filtering
- addr : Address for address filtering
- crcLength : CRC length, 0, 1 or 2
- crcInitial: CRC initial value
- crcPolynomial : Polynomial for CRC calculation
- crcInverted : Invert CRC bytes
- whiteningOn : Enable whitening
- whiteningInitial : Initial value used for whitening LFSR
- fixedPacketLength : Enable fixed packet length mode
- packetLength : Packet length in bytes (fixed packet length mode) or maximum packet length in bytes (variable packet length mode)
- preambleDetectorLength : Minimum preamble detection length, refer to **Constants** FSK preamble detector length
- tcxoVoltage : TCXO input voltage in V
- useRegulatorLDO : Use LDO regulator = True, use DC-DC regulator = False
- blocking : Blocking TX/RX = True, non blocking TX/RX = False

Return: Status

**SX1262.setBitRate(br)**
Set FSK bit rate in kbps.
Return: Status

**SX1262.setFrequencyDeviation(freqDev)**
Set FSK frequency deviation in kHz.
Return: Status

**SX1262.setRxBandwidth(rxBw)**
Set FSK RX bandwidth in kHz.
Return: Status

**SX1262.setDataShaping(dataShaping)**
Set FSK time-bandwidth product of the Gaussian filter to be used for shaping.
Return: Status

**SX1262.setSyncBits(syncWord, bitsLen)**
Set FSK sync word and sync bits length.
syncWord = Sync word in list
bitsLen = Sync word bit length
Return: Status

**SX1262.setPreambleLength(preambleLength)**
Set FSK preamble length.
Return: Status

**SX1262.setPreambleDetectorLength(preambleDetectorLength)**
Set minimum preamble detection length, refer to **Constants** FSK preamble detector length.

**SX1262.setNodeAddress(addr)**
Activate address filtering on node address addr.
Return: Status

**SX1262.setBroadcastAddress(addr)**
Activate address filtering on node and broadcast address addr.
Return: Status

**SX1262.disableAddressFiltering()**
Disable address filtering.
Return: Status

**SX1262.setCRC(len, initial=0x1D0F, polynomial=0x1021, inverted=True)**
Set FSK CRC.
len = CRC length, 0, 1 or 2
initial = CRC initial
polynomial = Polynomial used for CRC calculation
inverted = Enable CRC bytes inversion
Return: Status

**SX1262.setWhitening(enabled, initial=0x0100)**
Set FSK whitening.
initial = Initial value for whitening LFSR
Return: Status

**SX1262.fixedPacketLengthMode(len)**
Set FSK fixed packet length mode.
len = Packet length in bytes
Return: Status

**SX1262.variablePacketLengthMode(maxLen)**
Set FSK variable packet length mode.
maxLen = Max packet length in bytes
Return: Status

## Constants (Similar for SX1261 and SX1268)
Events: SX1262.TX_DONE, SX1262.RX_DONE
FSK address filter: SX1262.ADDR_FILT_OFF, SX1262.ADDR_FILT_NODE, SX1262.ADDR_FILT_NODE_BROAD
FSK preamble detector length: SX1262.PREAMBLE_DETECT_OFF, SX1262.PREAMBLE_DETECT_X -> X = 8, 16, 24, 32
Status dictionary: SX1262.STATUS