Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

https://github.com/pkucmus/micropython-pms7003

Micropython driver for the PMS7003 Air Quality Sensor
https://github.com/pkucmus/micropython-pms7003

Last synced: 2 months ago
JSON representation

Micropython driver for the PMS7003 Air Quality Sensor

Lists

README 

        
# PMS7003 MicroPython Driver



This is a MicroPython adaptation inspired by this Raspberry implementation: https://www.raspberrypi.org/forums/viewtopic.php?p=1244895&sid=5f9dab0e19a7086f9b900b51316ff349#p1244895



[Here](https://botland.com.pl/index.php?controller=attachment&id_attachment=2182) you can find the data sheet from [botland.com.pl](https://botland.com.pl/czujniki-czystosci-powietrza/10924-czujnik-pylu-czystosci-powietrza-pms7003-33v-uart.html)



## Caveats



### UART

I used it with an ESP32. Tried with ESP8266 but since it has only one (full)UART that is being used by the REPL (and WebREPL) it was unusable. ESP32 has an unused UART (UART 2) that can be used to communicate with other devices. So you need a chip that has a free UART (like ESP32).



### Voltage

The documentation claims that the device needs to run on 5V as it's internal fan is driven by 5V where the data pins output 3.3V for high.

**This was not the case for me** I could not read any data other than zeros from the UART when running on 5V.

Powering the whole device with 3.3V works fine (even though the fan may spin with slower).

I tested running on 3.3V on six different PMS7003 devices.

[MicroPython forum link where I asked for help](https://forum.micropython.org/viewtopic.php?t=4566)



## Example usage



    from pms7003 import Pms7003



    pms = Pms7003(uart=2)

    pms_data = pms.read()



`Pms7003.read()` will return a dictionary with *the oldest* read that is in the buffer. It means that your reads will always be a bit off in time, depending on the UART's buffer size and the frequency of your reads.

It's generaly a good idea not to read faster than the device writes.



The dictionary will contain the following data:



Key         | Description |                                               

:-----------|:------------------------------------------------------------

PM1_0       | PM 1.0 concentration μ g/m3 (factory environment)           

PM2_5       | PM 2.5 concentration μ g/m3 (factory environment)           

PM10_0      | PM 10 concentration μ g/m3 (factory environment)            

PM1_0_ATM   | PM 1.0 concentration μ g/m3 (atmospheric environment)       

PM2_5_ATM   | PM 2.5 concentration μ g/m3 (atmospheric environment)       

PM10_0_ATM  | PM 10 concentration μ g/m3 (atmospheric environment)        

PCNT_0_3    | Particle count of diameter beyond 0.3 um in 0.1 liter or air

PCNT_0_5    | Particle count of diameter beyond 0.5 um in 0.1 liter or air

PCNT_1_0    | Particle count of diameter beyond 1.0 um in 0.1 liter or air

PCNT_2_5    | Particle count of diameter beyond 2.5 um in 0.1 liter or air

PCNT_5_0    | Particle count of diameter beyond 5.0 um in 0.1 liter or air

PCNT_10_0   | Particle count of diameter beyond 10 um in 0.1 liter or air



(and four more with `FRAME_LENGTH`, `VERSION`, `ERROR` and `CHECKSUM`)



# Passive Driver



PMS7003 can work also in passive mode. It means that user has to request data

explicitly by sending a command message with appropriate data.

More about this [article](https://joshefin.xyz/air-quality-with-raspberrypi-pms7003-and-java/).

Details are in [datasheet](https://www.espruino.com/datasheets/PMS7003.pdf) as well.



```python

import micropython

from pms7003 import PassivePms7003



pms = PassivePms7003(uart=2)



def do_work(__):

    pms.wakeup()

    

    pms_data = pms.read()

    print(pms_data)

    

    pms.sleep()



# usually performing readings in interrupt handler (e.g. Timer's)

# so use schedule to avoid heap lock limitations:

# https://docs.micropython.org/en/latest/reference/isr_rules.html

callback = lambda __: micropython.schedule(do_work, 0)

```



# AQI



This repo also contains a simple class that can help calculate the Air Quality Index (as described [here](https://en.wikipedia.org/wiki/Air_quality_index#Computing_the_AQI))



```python

from pms7003 import Pms7003

from aqi import AQI



pms = Pms7003(uart=2)

pms_data = pms.read()

aqi = AQI.aqi(pms_data['PM2_5_ATM'], pms_data['PM10_0_ATM'])

```



`AQI.aqi(pm2_5_atm, pm10_0_atm)` returns an integer representing the AQI.