Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/kyrahabattoir/ToyWebBridge
A simple web bridge for https://buttplug.io/
https://github.com/kyrahabattoir/ToyWebBridge
Last synced: about 22 hours ago
JSON representation
A simple web bridge for https://buttplug.io/
- Host: GitHub
- URL: https://github.com/kyrahabattoir/ToyWebBridge
- Owner: kyrahabattoir
- License: other
- Created: 2020-10-25T00:06:33.000Z (over 3 years ago)
- Default Branch: master
- Last Pushed: 2021-12-22T21:42:48.000Z (over 2 years ago)
- Last Synced: 2024-03-10T23:39:04.323Z (4 months ago)
- Language: C#
- Homepage:
- Size: 118 KB
- Stars: 13
- Watchers: 2
- Forks: 3
- Open Issues: 1
-
Metadata Files:
- Readme: Readme.md
- License: LICENSE
Lists
- awesome-buttplug - ToyWebBridge
README
# Toy Web Bridge
# Running
In the project root folder use the command:
```dotnet run```
By default, it will run on locahost:5000, to change the ip/port:
```dotnet run --urls "http://ip:port"```
You can also edit & use Start.bat, it will bind to all interfaces and listen on port 27015
You will most likely have to setup port-forwarding if you want the web bridge to be accessed remotely.
Ctrl+C to exit.
# Safety
I realize that this might be important to outline:
Using this web bridge **requires revealing your computer's public IP** to the program that will interface with it.
I made this program to control toys from "Second Life" scripts which effectively act as a 3rd party "anonymity buffer", this solution is acceptable for me, but might not be for you, please be safe.
## Security
* You can set a **SecretKey** in **appsettings.json**.
* If no **SecretKey** is set, a temporary key will be generated (and displayed in the console window).
* To connect to the Web bridge, apps have to supply a header parameter named "SecretKey" with the proper value.
## Per toy configuration.
Each toy type can have a custom configuration in the ToySettings section of **appsettings.json**.
* (Optional) CommandDelay: By default, the maximum command rate is 50ms. You can set a longer value for a specific toy here.
* (Optional) PowerFactor: By default, You can limit the actual power range of a toy here, if 100% is too strong.
* (Optional) VisibleName: The toy will be identified under this name rather than the device name (useful for privacy).
## Using multiple identical devices
Using multiple identical devices is supported and duplicates will show as "Devicename 2" , "Devicename 3" and so on.
There is currently no way to uniquely identify each device under the ButtPlug API, so they are registered on a first come, first served basis.
## API
Examples use localhost:5000 as the Toy Web Bridge address and "Lovense Hush" as the device.
### Devices
The device APIs have general structure of `/api/Device/{Action}/{Devicename}/{argument}`
and is defined in `Controllers/DevicesController.cs`
#### Get a list of devices
```
GET http://localhost:5000/api/Device/List
```
#### Querying a specific device status
```
GET http://localhost:5000/api/Device/Info/Lovense%20Hush
```
Currently returns supported features for the queried device
#### Set global vibration level (all vibration motors)
```
GET http://localhost:5000/api/Device/VibrateCmd/Lovense%20Hush/0
GET http://localhost:5000/api/Device/VibrateCmd/Lovense%20Hush/50
GET http://localhost:5000/api/Device/VibrateCmd/Lovense%20Hush/100
```
#### Set vibration level on each vibrator independently
Note: You have to set the speed of all vibrators at once, the number of supplied values MUST match VibrateCmd Feature.
Example for VibrateCmd = 1:
```
GET http://localhost:5000/api/Device/SingleMotorVibrateCmd/Lovense%20Hush/0
GET http://localhost:5000/api/Device/SingleMotorVibrateCmd/Lovense%20Hush/50
GET http://localhost:5000/api/Device/SingleMotorVibrateCmd/Lovense%20Hush/100
```
Example for VibrateCmd = 2:
```
GET http://localhost:5000/api/Device/SingleMotorVibrateCmd/Lovense%20Edge/0,100
GET http://localhost:5000/api/Device/SingleMotorVibrateCmd/Lovense%20Edge/50,50
GET http://localhost:5000/api/Device/SingleMotorVibrateCmd/Lovense%20Edge/100,0
```
#### Play a vibration sequence
Devices that support VibrateCmd can play vibration sequences with "SequenceVibrateCmd".
Unlike the other commands, this one requires to use a JSON encoded POST query.
* A "Time" list indicates how long each sequence step takes.
* You can control each motor independently, if only only one motor instruction list is sent,
it is assumed that you want all motors to be controlled at the same time.
* For devices with more than 2 independent motors (is there any?), ommited entries are treated as 0.
Example:
```
POST http://localhost:5000/api/Device/SequenceVibrateCmd/Lovense%20Edge
```
Payload example (single/all motors): ( raw/JSON )
```
{
"Loop":false,
"Time":[500,500,500,500],
"Speeds":[
[10,0,50,0]
]
}
```
Payload example (two independent motors): ( raw/JSON )
```
{
"Loop":true,
"Time":[500,500,500,500],
"Speeds":[
[10,0,50,0],
[0,10,0,50]
]
}
```
* If "Loop" is true, the pattern will repeat until a new instruction is received.
* When a sequence ends, the motors will keep running at the last "Speed" value.
* Missing "Speed"values will be considered 0, "Time" determinates the sequence length.
#### Shut down the device
```
GET http://localhost:5000/api/Device/StopDeviceCmd/Lovense%20Hush
```
#### Status Codes
Errors are indicated with HTTP response status codes.
##### 200 Ok
The command/query has been executed successfully.
##### 400 Bad Request
The requested device doesn't support this function.
##### 401 Unauthorized
Access denied, make sure that you supplied a valid access key.
##### 404 Not Found
The requested device doesn't exist (or the URL is invalid).
## License
Toy Web Bridge is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/)
