Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/keebio/sinc-case
https://github.com/keebio/sinc-case
Last synced: 3 months ago
JSON representation
- Host: GitHub
- URL: https://github.com/keebio/sinc-case
- Owner: keebio
- Created: 2020-05-09T16:31:34.000Z (about 4 years ago)
- Default Branch: master
- Last Pushed: 2024-04-01T22:01:11.000Z (3 months ago)
- Last Synced: 2024-04-01T23:22:48.071Z (3 months ago)
- Size: 21.8 MB
- Stars: 71
- Watchers: 6
- Forks: 12
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- Funding: .github/FUNDING.yml
Lists
- awesome-keebio - Sinc
README
# Sinc Keyboard Case
Here are the case design files for the [Sinc](https://keeb.io/products/sinc-split-staggered-75-keyboard). The .ai files have multiple layers to toggle on/off to generate the correct set of plates/mid-layers/etc.
It's suggested to use the enclosed design.
## Plate Files
In the [plates](plates/) folder, there are DXF files of the switch plates and bottom plates. These are the same design as the FR4 plates that are sold. The switch plates are designed for 1.5-1.6mm thickness.
## Enclosed Design![image](images/sinc-enclosed.jpg)
In the [enclosed-case](enclosed-case/) folder, there are STL files for a design where the FR4 switch and bottom plates are used but have their sides covered. The top shell has been designed to be threaded into directly from underneath using long M2 screws.
For the Rev. 2-4, you will need [M2 screws that are 16mm](https://keeb.io/products/m2-screws-and-standoffs?variant=39401487040606) in length. For Rev. 1, due to the thicker mid layer, you will need 20mm screws.
## SKUF Alignment Guide/Tool
![image](images/skuf-align.jpg)
For aligning the SKUF feet so that they are straight, you can print off this tool to help you apply the SKUF feet better: [SKUF Alignment Guide](SKUF%20Alignment%20Guide.stl)
## Older Design
The original case design can be found in the [older-design](older-design/) folder. The design there can be used to make a stacked acrylic case
## License
These case files are released under the MIT License.