Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

https://github.com/rain-1/s

reupload of s, used to have 100 stars
https://github.com/rain-1/s

Last synced: 3 months ago
JSON representation

reupload of s, used to have 100 stars

Lists

README 

        
# s



After the [Shellshock](https://en.wikipedia.org/wiki/Shellshock_(software_bug))

bug happened, they fixed the parsing bug in bash that let people hijack

webservers by simply including `{ :; }`.



Fixing a bug after it's been found is good but it doesn't have to be the end.

Often you should think about the bigger picture and see why it was ever a bug

in the first place.



I suspected that since bash syntax is very complex, the parser is going to be a

lot of complicated code too. So I did some line counts of various shells to see

what the situation is like:



                  .c       .h

    gnu bash:     138227,  13746

    zsh:          135589,   5698

    shivers scsh: 118475 (scheme)

    templeos:     119115

    mirbsd mksh:   29223,   2562

    debian dash:   16503,   2084

    freebsd sh:    15453,   1622

    es shell:       9017,   1436

    plan9 rc:       5989,    327

    execline:       3794,    117



The line count for TempleOS isn't just counting its shell. It's the linecount

of the entire system: The operating system kernel, the compiler, the shell, the

drawing program, the graphical user interface, the 3D flight simulator. **Bash,

zsh and scsh have more code in them than an entire operating system.**



Shell syntax being overcomplex and ideosyncratic is a long-standing problem.

Other than shellshock, annoyances happen on a daily basis. Like the time a bug

in a bash script in steam rm -rf'd people's home directory [Ran steam. It deleted everything](https://github.com/valvesoftware/steam-for-linux/issues/3671).

I've had makefiles break a few times because there's a space in my path. It

took these people four years to fix that [Build failure when builddir contains

spaces](https://github.com/nodejs/node-gyp/issues/65).



My idea to improve things is to use an extremely minimal shell with the

simplest syntax possible.



# The new command interpreter



So I designed a new shell that aims to be extremely simple, and implemented it

in a small number of lines of code. Right now it's 780 lines plus 1200 for the

linenoise library. (Technically it is a "command interpreter" not a shell since

shell implies it implements the POSIX shell standard).



Here is the man page for *s*:



```

S(1)                      BSD General Commands Manual                      S(1)



NAME

     s — command line interpreter



SYNOPSIS

     s [-dvh] [SCRIPT ...]



DESCRIPTION

     s has two main modes of operation: interactive shell and script processor.



     If the SCRIPT is provided it will execute that file with optional given

     arguments.  Alternatively you can provide commands via stdin.



     Otherwise if you start s in a terminal you will be given an interactive

     shell prompt like this:



             s$ echo hello world!

             hello world!



OPTIONS

     -d      Enable debug mode, reporting becomes more verbose showing file and

             line number of where the error or warning occurred.



     -v      Print version and copyright info and exit.



     -h      Print usage info and exit.



SYNTAX

     The lexical syntax of the shell language is very strictly tokenized based

     on spaces.



     Variables may occur inside tokens with ${FOO} syntax, the {}'s are

     optional for when variables need to be next to other strings:



             s$ set FOO bar

             s$ set avar value

             s$ echo $FOO ${avar}

             bar value

             s$ echo $FOO$avar

             barvalue

             s$ echo ${FOO}string$avar

             barstringvalue



     See the BUILTINS section below for info on setting variables.



     If found at the beginning of a token the ~ character expands to ${HOME} as

     a shortcut for the user's home directory.



     Single and double quotes are used to group the enclosed strings into one

     token.  Variables are only expanded inside double quotes. You can escape

     characters in quotes by using backslashes, allowing you to insert the same

     quote character inside a string, as well as inserting newline, tab, and

     spaces. Quotes can also be inserted inside the other quote types without

     escaping them.



             s$ echo "I am using the '$SHELL' shell"

             I am using the '/bin/s' shell

             s$ echo 'I am using the "$SHELL" shell'

             I am using the "$SHELL" shell



             s$ echo "you can use backslash as well: \" \'"

             you can use backslash as well: " '



             $ echo 'person\tbalance\nRichard\t$500\nJohn\t$300'

             person  balance

             Richard $500

             John    $300



     Backticks can also be used to expand commands quoted inside to their out‐

     put:



             s$ xargs rm `cat oldfiles.txt` # delete all files found in oldfiles.txt

             s$ set CFILES `glob *.c`   # make $CFILES equal to a list of all C files



     The # character, as seen above, starts a comment until the end of the

     line.



     The grammar is line based. Sequences of tokens are treated as commands and

     the operators |, &&, and || are parsed in order of tightest binding first.



     File redirection is done with separate commands,

     pipes are needed:



             s$ echo "hello world" | > file.txt

             s$ echo "hello world again" | >> file.txt

             s$ cat | < file.txt

             hello world

             hello world again



     & at the end of a line can specify that a job should be run in the back‐

     ground.



     A backslash at the end of the line allows for commands to span multiple

     lines.



BUILTINS

     source SCRIPT [...]

             Open and execute commands in SCRIPT with the optional arguments

             provided.



     cd [DIR | -]

             Change current working directory to DIR.  If DIR is not supplied,

             change to $HOME instead.  If - is given switch directories to pre‐

             vious working directory, stored in $OWD.



     set VAR VAL

             Set the environment variable given by VAR equal to VAL.



     unset VAR

             Remove environment variable VAR.



     exit [N]

             Exit s with code N, defaults to 0.



ENVIRONMENT

     SHELL   The full pathname to the shell.



     HOME    The home directory of the current user.



     PWD     Current working directory.



     OWD     Previous working directory.



     PATH    A colon-separated list of directories in which s looks for com‐

             mands in.



AUTHORS

     rain-1 



     Ed van Bruggen 



LICENSE

     BSD 3 Clause



SEE ALSO

     execline(1)



     View source code and report bugs at: 



S v0.0.0                          Jun 28, 2017                         S v0.0.0

```



The important thing is what's missing: we don't have globs or "splatting" where

a variable `$FOO` turns into multiple command line arguments. One token stays

one token forever. This is a "no surprises" straightforward approach.



Look at how many ways one can screw up passing or copy an array in this [oil shell blog post](http://www.oilshell.org/blog/2016/11/06.html)



We don't even have redirection operators `>` in the shell language. They are

added as extra programs. So you write `grep foo bar | > out.txt`. `>` is just

another Unix command. `<` is essentially `cat`. A `glob` program is also

provided along with *s*, so you write `glob rm *`.



The benefit of this extreme minimalism is that the implementation can be done

with a very logical pipeline of operations: tokenizing splits the input based

on spaces and expands the variables out, parsing looks for the operators and

builds an AST, interpreting is a simple recursive walk down the AST

implementing the various operators.



* [tokenizer.c](https://github.com/rain-1/s/blob/master/tokenizer.c)

* [variables.c](https://github.com/rain-1/s/blob/master/variables.c)

* [parser.c](https://github.com/rain-1/s/blob/master/parser.c)

* [interpreter.c](https://github.com/rain-1/s/blob/master/interpreter.c)

* [repo](https://github.com/rain-1/s)



# Trying it out



* `git clone --recurse-submodules [email protected]:rain-1/s.git`

* `./makesfile`

* `./s`



# Changes



What's new with s:



* **s supports russian, japanese, unicode** We have now switched to the yhirose utf8-support branch of [linenoise](https://github.com/yhirose/linenoise/tree/utf8-support).

* **s does not use makefiles!** No more nasty makefiles. ./make builds it using a super simple shell script.



# End



What do you think? I would be very interested in hearing people's opinions

about *s* and the more general idea of stripping programs down to their

essential parts. Feel free to comment or make 'issues' on the repo if you have

any criticism, suggestions or just want to discuss.



# See also



* [oh](https://github.com/michaelmacinnis/oh) + https://www.youtube.com/watch?v=v1m-WEZz46U