Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

https://github.com/YosysHQ/nextpnr

nextpnr portable FPGA place and route tool
https://github.com/YosysHQ/nextpnr

Last synced: 3 months ago
JSON representation

nextpnr portable FPGA place and route tool

Lists

README 

        
nextpnr -- a portable FPGA place and route tool

===============================================



nextpnr aims to be a vendor neutral, timing driven, FOSS FPGA place and route

tool.



Currently nextpnr supports:

 * Lattice iCE40 devices supported by [Project IceStorm](https://github.com/YosysHQ/icestorm)

 * Lattice ECP5 devices supported by [Project Trellis](https://github.com/YosysHQ/prjtrellis)

 * Lattice Nexus devices supported by [Project Oxide](https://github.com/gatecat/prjoxide)

 * Gowin LittleBee devices supported by [Project Apicula](https://github.com/YosysHQ/apicula)

 * *(experimental)* Cyclone V devices supported by [Mistral](https://github.com/Ravenslofty/mistral)

 * *(experimental)* Lattice MachXO2 devices supported by [Project Trellis](https://github.com/YosysHQ/prjtrellis)

 * *(experimental)* a "generic" back-end for user-defined architectures



There is some work in progress towards [support for Xilinx devices](https://github.com/gatecat/nextpnr-xilinx/) but it is not upstream and not intended for end users at the present time. We hope to see more FPGA families supported in the future. We would love your help in developing this awesome new project!



A brief (academic) paper describing the Yosys+nextpnr flow can be found

on [arXiv](https://arxiv.org/abs/1903.10407).



Here is a screenshot of nextpnr for iCE40. Build instructions and

[getting started notes](#getting-started) can be found below.






See also:

- [F.A.Q.](docs/faq.md)

- [Architecture API](docs/archapi.md)



Prerequisites

-------------



The following packages need to be installed for building nextpnr, independent

of the selected architecture:



- CMake 3.13 or later

- Modern C++17 compiler (`clang-format` required for development)

- Python 3.5 or later, including development libraries (`python3-dev` for Ubuntu)

  - Python 3.9 or later is required for `nextpnr-himbaechel`

  - on Windows make sure to install same version as supported by [vcpkg](https://github.com/Microsoft/vcpkg/blob/master/ports/python3/CONTROL)

- Boost libraries (`libboost-dev libboost-filesystem-dev libboost-thread-dev libboost-program-options-dev libboost-iostreams-dev libboost-dev` or `libboost-all-dev` for Ubuntu)

- Eigen3 (`libeigen3-dev` for Ubuntu) is required to build the analytic placer

- Latest git Yosys is required to synthesise the demo design

- For building on Windows with MSVC, usage of vcpkg is advised for dependency installation.

  - For 32 bit builds: `vcpkg install boost-filesystem boost-program-options boost-thread eigen3`

  - For 64 bit builds: `vcpkg install boost-filesystem:x64-windows boost-program-options:x64-windows boost-thread:x64-windows eigen3:x64-windows`

  - For static builds, add `-static` to each of the package names.  For example, change `eigen3:x64-windows` to `eigen3:x64-windows-static`

  - A copy of Python that matches the version in vcpkg (currently Python 3.6.4).  You can download the [Embeddable Zip File](https://www.python.org/downloads/release/python-364/) and extract it.  You may need to extract `python36.zip` within the embeddable zip file to a new directory called "Lib".

- For building on macOS, brew utility is needed.

  - Install all needed packages `brew install cmake python boost eigen`



Getting started

---------------



### nextpnr-ice40



For iCE40 support, install [Project IceStorm](https://github.com/YosysHQ/icestorm) to `/usr/local` or another location, which should be passed as `-DICESTORM_INSTALL_PREFIX=/usr` to CMake. Then build and install `nextpnr-ice40` using the following commands:



```

cmake . -DARCH=ice40

make -j$(nproc)

sudo make install

```



On Windows, you may specify paths explicitly:



```

cmake . -DARCH=ice40 -DICESTORM_INSTALL_PREFIX=C:/ProgramData/icestorm -DCMAKE_TOOLCHAIN_FILE=C:/vcpkg/scripts/buildsystems/vcpkg.cmake -DVCPKG_TARGET_TRIPLET=x64-windows -G "Visual Studio 15 2017 Win64" -DPython3_EXECUTABLE=C:/Python364/python.exe -DPython3_LIBRARY=C:/vcpkg/packages/python3_x64-windows/lib/python36.lib -DPython3_INCLUDE_DIR=C:/vcpkg/packages/python3_x64-windows/include/python3.6 .

cmake --build . --config Release

```



To build a static release, change the target triplet from `x64-windows` to `x64-windows-static` and add `-DBUILD_STATIC=ON`.



A simple example that runs on the iCEstick dev board can be found in `ice40/examples/blinky/blinky.*`.

Usage example:



```

cd ice40/examples/blinky

yosys -p 'synth_ice40 -top blinky -json blinky.json' blinky.v               # synthesize into blinky.json

nextpnr-ice40 --hx1k --json blinky.json --pcf blinky.pcf --asc blinky.asc   # run place and route

icepack blinky.asc blinky.bin                                               # generate binary bitstream file

iceprog blinky.bin                                                          # upload design to iCEstick

```



Running nextpnr in GUI mode (see below for instructions on building nextpnr with GUI support):



```

nextpnr-ice40 --json blinky.json --pcf blinky.pcf --asc blinky.asc --gui

```



(Use the toolbar buttons or the Python command console to perform actions

such as pack, place, route, and write output files.)



### nextpnr-ecp5



For ECP5 support, install [Project Trellis](https://github.com/YosysHQ/prjtrellis) to `/usr/local` or another location, which should be passed as `-DTRELLIS_INSTALL_PREFIX=/usr/local` to CMake. Then build and install `nextpnr-ecp5` using the following commands:



```

cmake . -DARCH=ecp5 -DTRELLIS_INSTALL_PREFIX=/usr/local

make -j$(nproc)

sudo make install

```



 - Examples of the ECP5 flow for a range of boards can be found in the [Project Trellis Examples](https://github.com/YosysHQ/prjtrellis/tree/master/examples).



### nextpnr-nexus



For Nexus support, install [Project Oxide](https://github.com/gatecat/prjoxide) to `$HOME/.cargo` or another location, which should be passed as `-DOXIDE_INSTALL_PREFIX=$HOME/.cargo` to CMake. Then build and install `nextpnr-nexus` using the following commands:



```

cmake . -DARCH=nexus -DOXIDE_INSTALL_PREFIX=$HOME/.cargo

make -j$(nproc)

sudo make install

```



 - Examples of the Nexus flow for a range of boards can be found in the [Project Oxide Examples](https://github.com/gatecat/prjoxide/tree/master/examples).



Nexus support is currently experimental, and has only been tested with engineering sample silicon.



### nextpnr-generic



The generic target allows running placement and routing for arbitrary custom architectures.



```

cmake . -DARCH=generic

make -j$(nproc)

sudo make install

```



An example of how to use the generic flow is in [generic/examples](generic/examples). See also the [Generic Architecture docs](docs/generic.md).



### nextpnr-himbaechel



The himbaechel target allows running placement and routing for larger architectures that share a common structure.



#### gowin



For Gowin support, install [Project Apicula](https://github.com/YosysHQ/apicula)



```

cmake . -DARCH="himbaechel" -DHIMBAECHEL_GOWIN_DEVICES="all"

make -j$(nproc)

sudo make install

```



 - Examples of the Gowin flow for a range of boards can be found in the [Project Apicula Examples](https://github.com/YosysHQ/apicula/tree/master/examples).



### GUI



The nextpnr GUI is not built by default, to reduce the number of dependencies for a standard headless build. To enable it, add `-DBUILD_GUI=ON` to the CMake command line and ensure that Qt5 and OpenGL are available:



 - On Ubuntu 22.04 LTS, install `qtcreator qtbase5-dev qt5-qmake` 

 - On other Ubuntu versions, install `qt5-default`

 - For MSVC vcpkg, install `qt5-base` (32-bit) or `qt5-base:x64-windows` (64-bit)

 - For Homebrew, install `qt5` and add qt5 in path: `echo 'export PATH="/usr/local/opt/qt/bin:$PATH"' >> ~/.bash_profile`

` - this change is effective in next terminal session, so please re-open terminal window before building



### Multiple architectures



To build nextpnr for multiple architectures at once, a semicolon-separated list can be used with `-DARCH`.



```

cmake . -DARCH="ice40;ecp5"

make -j$(nproc)

sudo make install

```



To build every available stable architecture, use `-DARCH=all`. To include experimental arches (currently nexus), use `-DARCH=all+alpha`.



Pre-generating chip databases

-----------------------------



It is possible to pre-generate chip databases (`.bba` files). This can come in handy when building on time-constrained cloud instances, or in situations where Python is unable to use modules. To do this, build the architecture as a standalone project, which will produce the chip database alone. For example, for iCE40:



```

cd ice40

cmake .

make

```



This will create a `chipdb` directory with `.bba` files. Provide the path to this directory when building nextpnr by using `-D_CHIPDB=/path/to/chipdb`.



Cross-compilation

-----------------



Apart from chip databases, nextpnr requires the `bba` tool to be compiled for the build system. This tool can be compiled as a separate project:



```

cd bba

cmake .

make

```



This will create a `bba-export.cmake` file. Provide the path to this file when cross-building nextpnr by using `-DBBA_IMPORT=/path/to/bba-export.cmake`.



Additional notes for building nextpnr

-------------------------------------



The following runs a debug build of the iCE40 architecture without GUI, without Python support, without the HeAP analytic placer and only HX1K support:



```

cmake . -DARCH=ice40 -DCMAKE_BUILD_TYPE=Debug -DBUILD_PYTHON=OFF -DICE40_HX1K_ONLY=1

make -j$(nproc)

```



To make static build release for iCE40 architecture use the following:



```

cmake . -DARCH=ice40 -DBUILD_PYTHON=OFF -DSTATIC_BUILD=ON

make -j$(nproc)

```



The HeAP placer's solver can optionally use OpenMP for a speedup on very large designs. Enable this by passing `-DUSE_OPENMP=yes` to cmake (compiler support may vary).



You can change the location where nextpnr will be installed (this will usually default to `/usr/local`) by using `-DCMAKE_INSTALL_PREFIX=/install/prefix`.



Notes for developers

--------------------



- All code is formatted using `clang-format` according to the style rules in `.clang-format` (LLVM based with

  increased indent widths and brace wraps after classes).

- To automatically format all source code, run `make clangformat`.

- See the wiki for additional documentation on the architecture API.



Recording a movie

-----------------



- To save a movie recording of place-and-route click recording icon in toolbar and select empty directory

  where recording files will be stored and select frames to skip.

- Manually start all PnR operations you wish

- Click on recording icon again to stop recording

- Go to directory containing files and execute `ffmpeg -f image2 -r 1 -i movie_%05d.png -c:v libx264 nextpnr.mp4`



Testing

-------



- To build test binaries as well, use `-DBUILD_TESTS=ON` and after `make` run `make test` to run them, or you can run separate binaries.

- To use code sanitizers use the `cmake` options:

  - `-DSANITIZE_ADDRESS=ON`

  - `-DSANITIZE_MEMORY=ON -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++`

  - `-DSANITIZE_THREAD=ON`

  - `-DSANITIZE_UNDEFINED=ON`

- Running valgrind example `valgrind --leak-check=yes --tool=memcheck ./nextpnr-ice40 --json ice40/blinky.json`

- Running tests with code coverage use `-DBUILD_TESTS=ON -DCOVERAGE` and after `make` run `make ice40-coverage`

- After that open `ice40-coverage/index.html` in your browser to view the coverage report

- Note that `lcov` is needed in order to generate reports



Links and references

--------------------



### Synthesis, simulation, and logic optimization



- [Yosys](https://yosyshq.net/yosys/)

- [Icarus Verilog](http://iverilog.icarus.com/)

- [ABC](https://people.eecs.berkeley.edu/~alanmi/abc/)



### FPGA bitstream documentation (and tools) projects



- [Project IceStorm (Lattice iCE40)](https://github.com/YosysHQ/icestorm)

- [Project Trellis (Lattice ECP5)](https://yosyshq.github.io/prjtrellis-db/)

- [Project X-Ray (Xilinx 7-Series)](https://symbiflow.github.io/prjxray-db/)

- [Project Chibi (Intel MAX-V)](https://github.com/rqou/project-chibi)



### Other FOSS FPGA place and route projects



- [Arachne PNR](https://github.com/cseed/arachne-pnr)

- [VPR/VTR](https://verilogtorouting.org/)

- [SymbiFlow](https://github.com/SymbiFlow/symbiflow-arch-defs)