Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

https://github.com/dropbox/trapperkeeper

A suite of tools for ingesting and displaying SNMP traps.
https://github.com/dropbox/trapperkeeper

Last synced: 3 months ago
JSON representation

A suite of tools for ingesting and displaying SNMP traps.

Lists

README 

        
TrapperKeeper

=============



Description

-----------



TrapperKeeper is a suite of tools for ingesting and displaying SNMP

traps. This is designed as a replacement for snmptrapd and to supplement

existing stateful monitoring solutions.



Normally traps are stateless in nature which makes it difficult to

monitor with a system like nagios which requires polling a source.

TrapperKeeper will store traps in an active state for a configured

amount of time before expiring. This makes it possible to poll the

service for active traps and alert off of those traps.



One example might be a humidity alert. If you cross over the humidity

threshold and it clears immediately you might not want to be paged at

3am. But if it continues to send a trap every 5 minutes while it's over

that threshold the combination of (host, oid, severity) will remain in

an active state as long as that trap's expiration duration is longer

than 5 minutes. This allows something like nagios to alarm when a single

trap remains active for greater than some period of time.



Another benefit is allowing aggregation of pages. Previously we'd just

had an e-mail to a pager per trap but now we're only paged based on the

alert interval regardless of how many traps we receive. This also allows

us to schedule downtime for a device during scheduled maintenance to

avoid trap storms.



Requirements

------------



Ubuntu

~~~~~~



.. code:: bash



    $ sudo apt-get install libmysqlclient-dev libsnmp-dev



Installation

------------



New versions will be updated to PyPI pretty regularly so it should be as

easy as:



.. code:: bash



    $ pip install trapperkeeper



Once you've created a configuration file with your database information

you can run the following to create the database schema.



.. code:: bash



    $ python -m trapperkeeper.cmds.sync_db -c /path/to/trapperkeeper.yaml



Tools

-----



trapperkeeper

~~~~~~~~~~~~~



The trapperkeeper command receives SNMP traps and handles e-mailing and

writing to the database. An example configuration file with

documentation is available `here. `__



trapdoor

~~~~~~~~



trapdoor is a webserver that provides a view into the existing traps as

well as an API for viewing the state of traps. An example configuration

file with documentation is available `here. `__



.. figure:: https://raw.githubusercontent.com/dropbox/trapperkeeper/master/images/trapdoor.png

   :alt: Screenshot



   Screenshot

API

^^^



/api/activetraps

''''''''''''''''



**Optional Parameters:** \* host \* oid \* severity



**Returns:**



.. code:: javascript



    [

        (, , )

    ]



/api/varbinds/

''''''''''''''



**Returns:**



.. code:: javascript



    [

        {

            "notification_id": ,

            "name": ,

            "pretty_value": ,

            "oid": ,

            "value": ,

            "value_type": 

        }

    ]



MIB Configuration

-----------------



``trapperkeeper`` and ``trapdoor`` use the default mibs via netsnmp. You

can see the default path for your system by running

``net-snmp-config --default-mibdirs``. You can use the following

environment variables usually documented in the ``snmpcmd`` man page



    MIBS - The list of MIBs to load. Defaults to

    SNMPv2-TC:SNMPv2-MIB:IF-MIB:IP-MIB:TCP-MIB:UDP-MIB:SNMP-VACM-MIB.



    MIBDIRS - The list of directories to search for MIBs. Defaults to

    /usr/share/snmp/mibs.



For example I run both the ``trapperkeeper`` and ``trapdoor`` commands

with the following environment to add a directory to the path and load

all mibs.



``MIBS=ALL MIBDIRS=+/usr/share/mibs/local/``



TODO

----



-  Allow Custom E-mail templates for TrapperKeeper

-  cdnjs prefix for local cdnjs mirrors

-  User ACLs for resolution

-  Logging resolving user



Known Issues

------------



-  Doesn't currently support SNMPv3

-  Doesn't currently support inform

-  Certain devices have been known to send negative TimeTicks. pyasn1

   fails to handle this.