Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

https://github.com/GiorgosXou/TUIFIManager

A cross-platform terminal-based termux-oriented file manager (and component), meant to be used with a Uni-Curses project or as is.
https://github.com/GiorgosXou/TUIFIManager

cross-platform filemanager filemanager-ui ncurses pdcurses terminal terminal-based termux tui unicurses vi-motion vim vim-motions

Last synced: about 2 months ago
JSON representation

A cross-platform terminal-based termux-oriented file manager (and component), meant to be used with a Uni-Curses project or as is.

Host: GitHub
URL: https://github.com/GiorgosXou/TUIFIManager
Owner: GiorgosXou
License: gpl-3.0
Created: 2021-12-31T03:05:40.000Z (over 2 years ago)
Default Branch: master
Last Pushed: 2024-04-19T15:58:19.000Z (about 2 months ago)
Last Synced: 2024-04-19T19:52:21.577Z (about 2 months ago)
Topics: cross-platform, filemanager, filemanager-ui, ncurses, pdcurses, terminal, terminal-based, termux, tui, unicurses, vi-motion, vim, vim-motions
Language: Python
Homepage:
Size: 4.99 MB
Stars: 578
Watchers: 5
Forks: 11
Open Issues: 17
Metadata Files:
- Readme: README.md
- Changelog: CHANGELOG.md
- License: LICENSE

Lists

cli-apps - TUIFI Manager - A cross-platform terminal-based termux-oriented file manager (and component), meant to be used with a Uni-Curses project or as is. (<a name="file-manager"></a>File manager)
awesome-tuis - TUIFIManager - platform terminal-based file manager *(supports termux)* (Table of Contents)
my-awesome-stars - GiorgosXou/TUIFIManager - A cross-platform terminal-based termux-oriented file manager (and component), meant to be used with a Uni-Curses project or as is. (Python)
awesome-cli-apps - TUIFI Manager - A cross-platform terminal-based termux-oriented file manager (and component), meant to be used with a Uni-Curses project or as is. (<a name="file-manager"></a>File manager)

README

        



TUIFI Manager



    

      

    

    

      

	





A cross-platform terminal-based termux-oriented file manager *(and component)*, meant to be used with a [Uni-Curses](https://github.com/unicurses/unicurses) project or as is. This project is mainly an attempt to get more attention to the [Uni-Curses](https://github.com/unicurses/unicurses) project. 

##











_{FONT: Cartograph CF}





# ⚙️ Installation

```terminal

sudo pip3 install tuifimanager --upgrade

```

```terminal

pip3 install TUIFIManager --upgrade

```

or just ^^^ if it works for you. *(eg. on termux?)*

# 💥 Usage

Run `tuifi` in your terminal to use it as is or import it in one of your [Uni-Curses](https://github.com/unicurses/unicurses) project as a component like:

```python

from TUIFIManager import *

```

for more details look into the `__main__.py`

# 📦 Features 

### • 📌 *Current:*

- [Supports X11 Drag&Drop from terminals](#-customization 'set `tuifi_synth_dnd` enviroment variable to `True`. `pip install pynput PySide6 python-xlib`...')

- Supports most common mouse events 

- Can be used as a component

- Uses about [~30MB](## '80mb with synthetic xdnd') of RAM

- Strong [C TUI backend](https://github.com/unicurses/unicurses 'Via Uni-Curses, a NCurses\\PDCurses wrapper')

- It is pretty snappy 

- Supports [Termux](https://github.com/termux) 

- Cross Platform 

- and more

### • 🔮 *Desired:*

- Macros

- [Treeview](## 'Via a `WindowPad`')

- Undo\Redo

- Improved UI

- Multiple tabs

- [Sixel support](https://github.com/GiorgosXou/TUIFIManager/issues/86#issuecomment-2016846146)

- Effect on cutted Files

- Multithread performance

# ⌨️ Keybindings

In `vim_mode` both normal and vim shortcuts work 

| Normal      | vim_mode | Action                                        |

|----         | ---- |----                                          |

|`SHIFT + TAB`  |   |Moves selected file to the previous directory |

|`KEY_BACKSPACE`| `J` |Opens\Goes to the previous directory          |

|`ALT + DOWN`   |   |Opens\Closes the "right-click menu"           |

|`KEY_HOME`     | `H`  |Navigates to the $HOME directory              |

|`KEY_F5`       |   |Reload\Refresh current directory              |

|`KEY_F3`       | `o`  |(descending) order-type switch|

|`KEY_F1`       | `O`  |(ascending) order-type switch|

|`CTRL + V`     | `p` |Pastes the Copied or Cuted files              |

|`DEL`          | `CTRL+d`  |Deletes the selected files                    |

|`CTRL + F`     | `i`  |Find Files *(if not auto_find_on_typing)*     |

|`CTRL + O`     |   |Open whole directory in editor                |

|`CTRL + A`     |  |Select all files in current folder|

|`CTRL + C`     | `yy`  |Copies the selected files                     |

|`CTRL + K`     |   |Copies the selected files                     |

|`CTRL + X`     | `c`  |Cuts the selected files                       |

|`CTRL + R`     | `r` |Rename selected file                          | 

|`CTRL + T`     | | Toggle hidden files|

|`CTRL + N`     | `W` |Create new folder                             |

|`CTRL + W`     | `w` |Create new file                               |

|`ARROW KEYS`   | `l` `k` `j` `h`  |Navigates files                               |

|`KEY_ENTER`    | `K`|Opens files                                   |

|`CTRL + E`     | `e` |Exit with `cd`                                  |

|`ESCAPE`       |   |Exit                                          |

**(*TIP:** 🐁 use `ALT + CLICK` for multiple mouse selection if `SHIFT` not working)*

***TERMUX only Shortcuts\Keybindings***

| Shortcut    | Action                                                                         |

|----         |:----                                                                           |

|`CTRL + DOWN`| Goes in&out of select-mode while also automatically copies the selected file(s)|

|`CTRL + LEFT`| Goes out of select-mode while also cuts the seleccted file(s)                  |

|`CTRL + END` | Goes out of select-mode while also deleting the selected file(s)               |

|`CTRL + UP`  | Same as `CTRL + V`, Pastes the Copied or Cuted files                           |

|`END`        | Deletes selected files                                                         |

# 👨‍💻 Commands

**(Default & Custom Comands)** - To perform a command under the normal-mode, you first have to press the space-bar and then type the command. Alternatively, use `vim_mode` or enable the `tuifi_auto_command_on_typing` env-variable *(notice: it disables `tuifi_auto_find_on_typing`)*. **The default commands can be seen below and can be found under the `~/.config/tuifi/cmds.conf` where you can add your custom ones too:**

| Cmd | Type | Attributes | Label Information|

|---|---|---|---|

|`gt` | open | 'directory':'~/.config/tuifi'           | - tuifi -|

|`gh` | open | 'directory':'~/'                        | - Home -|

|`owv` | open | 'directory':None,'\_with':'vim'         |Opened With Vim|

|`yat` | copy | 'pattern':'.+\.txt'                     ||

|`yy` | copy | 'pattern':None                          ||

**Available Type-keywords:** `open`, `copy`, `cut`, [`find`](## 'Attributes: `filename`')

**important note:** `o` is also used for ordering in `vim_mode`. In this case you can first press space-bar before proceeding with `owv` or with any other already reserved starting key, or just change it. 

**Additionally** there are also some "static" ones like the `m`+character which marks the current directory into the character, so you can navigate back to it by using \` or `;`+that_character 

# 📜 Documentation

_{Work in progress 🛠️🏗 ...}

# 💭 Customization 

How do I enable vim_mode?

> Set `tuifi_vim_mode` enviroment variable to `True`

How do I enable synthetic XDND?

> set `tuifi_synth_dnd` enviroment variable to `True`. `pip install pynput PySide6 python-xlib`. Know it's expirimental! You'll need to adapt to it slightly, **use it as: Drag&drop + click afterwords where you want the file to be dropped.** [See also](https://github.com/GiorgosXou/TUIFIManager/discussions/92) and [this issue](https://github.com/GiorgosXou/TUIFIManager/issues/21)

How do I set the default editor?

> Set `tuifi_default_editor` enviroment variable to `vim` or whatever you prefer

How do I disable the auto-find-mode?

> You can just set `tuifi_auto_find_on_typing` enviroment variable to `False`

How do I change the scroll sensitivity?

> You can set either or both `tuifi_scroll_sensitivity`, `tuifi_ctrl_scroll_sensitivity` enviromental variables, to the disered number of characters per scroll action *(they default to 1 and 7)*

How do I change the default keys (besides commands)?

> This is not possible right now althought you could play around with the content of `toggle_vim_mode` function under `__init__.py`

How do I change the number of visible lines of filenames that are visible?

> You can set how mnay lines you want using `tuifi_visible_filename_lines` *(Defaults to 4)*

How do I change the default configuration path?

> Set `tuifi_config_path` enviroment variable to whatever you prefer most

How do I toggle hidden files/folders?

> You can either `CTRL + T` or set `tuifi_show_hidden` enviroment variable to `True`

How do I change the default colors?

> [look here for more informations](https://github.com/GiorgosXou/TUIFIManager/issues/38)

# 💗 Donation

I do really need money to survive, I have no job, living in a basement, making things for free, because I love to.

- [***Paypal Address***](https://www.paypal.com/donate/?hosted_button_id=QNQN23M55EJVS)

- ***Monero Address:*** `897ehhSQJQpGF7tYDhQM51jiX7nnHmzuYAW4q8JGwJxu8JKXvaK6AivCzatuJxnifjZ2qy98ks2g2PhmTaYCMMta2Ga2LJx`







# 🫶 Special thanks to

- [@KORBEN for this article](https://korben.info/gestionnaire-fichiers-terminal-tuifimanager-multiplateforme-leger-personnalisable.html)

- [Bryan Lunduke for this article](https://lunduke.substack.com/p/tuifi-manager-a-file-manager-in-the)

- [Brodie Robertson for this video](https://youtu.be/9laxdMKTZLA)

- [r/linux community for their comments](https://www.reddit.com/r/linux/comments/zzf5rx)

- [r/cyberDeck community for their comments](https://www.reddit.com/r/cyberDeck/comments/zttur0)

- [r/commandline community for their comments](https://www.reddit.com/r/commandline/comments/zt30v9)

# 🕳️ Outro

- Any Idea with this issue https://github.com/unicurses/unicurses/issues/21 ?

- Btw I use TUIFI in a daily basis. As crazy as it might sound: It's my primary file manager.