Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/0x61nas/nixfiles
my nix files (WIP)
https://github.com/0x61nas/nixfiles
nix nixos nixos-configuration
Last synced: 24 days ago
JSON representation
my nix files (WIP)
- Host: GitHub
- URL: https://github.com/0x61nas/nixfiles
- Owner: 0x61nas
- License: other
- Created: 2024-05-08T21:24:58.000Z (8 months ago)
- Default Branch: aurora
- Last Pushed: 2024-11-21T00:07:49.000Z (about 2 months ago)
- Last Synced: 2024-11-21T01:18:45.729Z (about 2 months ago)
- Topics: nix, nixos, nixos-configuration
- Language: Lua
- Homepage:
- Size: 1.35 MB
- Stars: 0
- Watchers: 1
- Forks: 0
- Open Issues: 12
-
Metadata Files:
- Readme: README.md
- License: LICENSE.txt
Awesome Lists containing this project
README
❄️ NixOS dotfiles ❄️
```mint
⠀⠀ 🌸 Setup / ARCHY DWM 🌸
-----------------------------------
╭─ Distro -> NixOS
├─ Editor -> Neovim
├─ Browser -> Firefox
├─ Shell -> ZSH
╰─ Resource Monitor -> Btop
╭─ Model -> LENOVO LEGION Y540-15IRH
├─ CPU -> Intel i7-9750H @ 4.50 GHz
├─ GPU -> NVIDIA GeForce GTX 1660 Ti Mobile
╰─ Resolution -> 1920x1080@144hz
╭─ WM -> Archy DWM
├─ Terminal -> Arych terminal
├─ Theme -> Gruvbox Dark Hard
├─ Icons -> Gruvbox-Plus-Dark
╰─ Font -> JetBrains Mono Nerd Font
```
> [!Warning]
> This repo is still experimental, USE IT ON YOUR OWN RESPONSIBILITY
> [!Warning]
> This readme file isn't completed yet, and it might have outdated or even evil information
> [!Warning]
> WHAT ABOUT GOING OUTSIDE?
> [!Warning]
> STOP
## Commands you should know:
- Rebuild and switch to change the system configuration (in the configuration directory):
```
just s
```
OR
```
doas nixos-rebuild switch --flake '.#anas'
```
- Connect to internet (Change what's inside the brackets with your info).
```
iwctl --passphrase [passphrase] station [device] connect [SSID]
```
## Installation
I'll guide you through the Installation, but first make sure to download the Minimal ISO image available at [NixOS](https://nixos.org/download#nixos-iso) and make a bootable drive with it.
and an ethernet cable to make things easier. We shall begin!
> Only follow these steps after using the bootable drive, changing BIOS boot priority and getting into the installation!
### Pre-install (drive preparation)
```sh
video=1920x1080
setfont ter-128n
# configure networking as needed (skip this if you're using ethernet)
sudo -i
lsblk # check info about partitions and the device you want to use for the installation
gdisk /dev/vda #change according to your system, for me it's /dev/nvme0n1
# then configure 600M type ef00, rest ext4 type 8300 as described below
# Type "n" to make a new partition, choose the partition number, first sector can be default but last sector should be 600M. Hex code for EFI is ef00.
# Now type n again to make another partition, this time we'll leave everything as default. After finishing these steps, make sure to write it to the disk by typing "w".
lsblk
mkfs.fat -F 32 -n boot /dev/vda1
mkfs.ext4 -L nixos /dev/vda2
mount /dev/disk/by-label/nixos /mnt
mkdir /mnt/boot
mount /dev/disk/by-label/boot /mnt/boot
```
### The actual installation
After mounting the partitions, you can move to the second part...
```sh
# go inside a nix shell with the specified programs
nix-shell -p git nixUnstable neovim
# create this folder if necessary
mkdir -p /mnt/etc/
# clone the repo
git clone https://github.com/anas/nixfiles.git /mnt/etc/nixos --recurse-submodules
# generate the config and take some files
nixos-generate-config --root /mnt --show-hardware-config > /mnt/etc/nixos/hosts/anas/hardware-configuration.nix
# make sure you're in this path
cd /mnt/etc/nixos
# Install my config:
nixos-install --flake '.#anas'
```