Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/17Halbe/z-push
z-push docker image designed to work with tvial/docker-mailserver
https://github.com/17Halbe/z-push
docker docker-mailserver z-push
Last synced: 10 days ago
JSON representation
z-push docker image designed to work with tvial/docker-mailserver
- Host: GitHub
- URL: https://github.com/17Halbe/z-push
- Owner: 17Halbe
- Created: 2018-03-30T17:23:45.000Z (over 6 years ago)
- Default Branch: master
- Last Pushed: 2018-04-11T19:50:42.000Z (over 6 years ago)
- Last Synced: 2024-08-01T12:28:24.455Z (3 months ago)
- Topics: docker, docker-mailserver, z-push
- Language: Shell
- Size: 29.3 KB
- Stars: 17
- Watchers: 3
- Forks: 13
- Open Issues: 1
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
## Z-Push Docker Image for tvial/docker-mailserver
This [z-push docker image](https://hub.docker.com/r/17halbe/z-push/) is designed to work in lieu with the **tvial/docker-mailserver** (see [tomav/docker-mailserver](https://github.com/tomav/docker-mailserver) for further information.)
#### The following variables are currently used:
- `TIMEZONE`: in the format of `Europe/Zurich`
- `IMAP_SERVER`: your imap server address/ip
- `IMAP_PORT`: imap port
- `SMTP_SERVER`: smtp server address/ip
- `SMTP_PORT`: smtp port
- `DEBUG`: [0/1] disables/enables verbose logging.
## Device Setup
For a quick guide, how to setup up your mobile device, have a look at the [Zarafa-Homepage](https://doc.zarafa.com/7.1/User_Manual/en-US/html/_configure_mobile_platforms.html)
## Configuration
If you need to change the default configuration, you can do so by placing a `config.php` and/or a `imap.php` into a folder which has to be mounted as a volume to `/config/` inside the container.
**Note:** Those files just get appended to the container configuration files for now.
Example:
```
docker run -d -name z-push \
-v ./config:/config/ \
-e TIMEZONE=Europe/Zurich \
-e IMAP_SERVER=imap.yourdomain.tld \
-e IMAP_PORT=143 \
-e SMTP_SERVER=smtp.yourdomain.tld \
-e SMTP_PORT=465 \
-e DEBUG=1 \
17halbe/z-push`
```
The used configuration is being put out to the docker logs upon container start, and can be read by `docker logs `
Here are the settings used at the time of writing:
### config.php
```php
.
*
* Consult LICENSE file for details
************************************************/
/**********************************************************************************
* Default settings
*/
// Defines the default time zone, change e.g. to "Europe/London" if necessary
define('TIMEZONE', '');
// Defines the base path on the server
define('BASE_PATH', dirname($_SERVER['SCRIPT_FILENAME']). '/');
// Try to set unlimited timeout
define('SCRIPT_TIMEOUT', 0);
// When accessing through a proxy, the "X-Forwarded-For" header contains the original remote IP
define('USE_X_FORWARDED_FOR_HEADER', false);
// When using client certificates, we can check if the login sent matches the owner of the certificate.
// This setting specifies the owner parameter in the certificate to look at.
define("CERTIFICATE_OWNER_PARAMETER", "SSL_CLIENT_S_DN_CN");
/*
* Whether to use the complete email address as a login name
* (e.g. [email protected]) or the username only (user).
* This is required for Z-Push to work properly after autodiscover.
* Possible values:
* false - use the username only.
* true - string the mobile sends as username, e.g. full email address (default).
*/
define('USE_FULLEMAIL_FOR_LOGIN', true);
/**********************************************************************************
* StateMachine setting
*
* These StateMachines can be used:
* FILE - FileStateMachine (default). Needs STATE_DIR set as well.
* SQL - SqlStateMachine has own configuration file. STATE_DIR is ignored.
* State migration script is available, more informations: https://wiki.z-hub.io/x/xIAa
*/
define('STATE_MACHINE', 'FILE');
define('STATE_DIR', '/state/');
/**********************************************************************************
* IPC - InterProcessCommunication
*
* Is either provided by using shared memory on a single host or
* using the memcache provider for multi-host environments.
* When another implementation should be used, the class can be set here explicitly.
* If empty Z-Push will try to use available providers.
*/
define('IPC_PROVIDER', '');
/**********************************************************************************
* Logging settings
*
* The LOGBACKEND specifies where the logs are sent to.
* Either to file ("filelog") or to a "syslog" server or a custom log class in core/log/logclass.
* filelog and syslog have several options that can be set below.
* For more information about the syslog configuration, see https://wiki.z-hub.io/x/HIAT
* Possible LOGLEVEL and LOGUSERLEVEL values are:
* LOGLEVEL_OFF - no logging
* LOGLEVEL_FATAL - log only critical errors
* LOGLEVEL_ERROR - logs events which might require corrective actions
* LOGLEVEL_WARN - might lead to an error or require corrective actions in the future
* LOGLEVEL_INFO - usually completed actions
* LOGLEVEL_DEBUG - debugging information, typically only meaningful to developers
* LOGLEVEL_WBXML - also prints the WBXML sent to/from the device
* LOGLEVEL_DEVICEID - also prints the device id for every log entry
* LOGLEVEL_WBXMLSTACK - also prints the contents of WBXML stack
*
* The verbosity increases from top to bottom. More verbose levels include less verbose
* ones, e.g. setting to LOGLEVEL_DEBUG will also output LOGLEVEL_FATAL, LOGLEVEL_ERROR,
* LOGLEVEL_WARN and LOGLEVEL_INFO level entries.
*
* LOGAUTHFAIL is logged to the LOGBACKEND.
*/
define('LOGBACKEND', 'filelog');
define('LOGLEVEL', LOGLEVEL_INFO);
define('LOGAUTHFAIL', false);
// To save e.g. WBXML data only for selected users, add the usernames to the array
// The data will be saved into a dedicated file per user in the LOGFILEDIR
// Users have to be encapusulated in quotes, several users are comma separated, like:
// $specialLogUsers = array('[email protected]', 'myusername');
define('LOGUSERLEVEL', LOGLEVEL_DEVICEID);
$specialLogUsers = array();
// Filelog settings
define('LOGFILEDIR', '/var/log/z-push/');
define('LOGFILE', LOGFILEDIR . 'z-push.log');
define('LOGERRORFILE', LOGFILEDIR . 'z-push-error.log');
// Syslog settings
// false will log to local syslog, otherwise put the remote syslog IP here
define('LOG_SYSLOG_HOST', false);
// Syslog port
define('LOG_SYSLOG_PORT', 514);
// Program showed in the syslog. Useful if you have more than one instance login to the same syslog
define('LOG_SYSLOG_PROGRAM', 'z-push');
// Syslog facility - use LOG_USER when running on Windows
define('LOG_SYSLOG_FACILITY', LOG_LOCAL0);
// Location of the trusted CA, e.g. '/etc/ssl/certs/EmailCA.pem'
// Uncomment and modify the following line if the validation of the certificates fails.
// define('CAINFO', '/etc/ssl/certs/EmailCA.pem');
/**********************************************************************************
* Mobile settings
*/
// Device Provisioning
define('PROVISIONING', true);
// This option allows the 'loose enforcement' of the provisioning policies for older
// devices which don't support provisioning (like WM 5 and HTC Android Mail) - dw2412 contribution
// false (default) - Enforce provisioning for all devices
// true - allow older devices, but enforce policies on devices which support it
define('LOOSE_PROVISIONING', false);
// The file containing the policies' settings.
// Set a full path or relative to the z-push main directory
define('PROVISIONING_POLICYFILE', 'policies.ini');
// Default conflict preference
// Some devices allow to set if the server or PIM (mobile)
// should win in case of a synchronization conflict
// SYNC_CONFLICT_OVERWRITE_SERVER - Server is overwritten, PIM wins
// SYNC_CONFLICT_OVERWRITE_PIM - PIM is overwritten, Server wins (default)
define('SYNC_CONFLICT_DEFAULT', SYNC_CONFLICT_OVERWRITE_PIM);
// Global limitation of items to be synchronized
// The mobile can define a sync back period for calendar and email items
// For large stores with many items the time period could be limited to a max value
// If the mobile transmits a wider time period, the defined max value is used
// Applicable values:
// SYNC_FILTERTYPE_ALL (default, no limitation)
// SYNC_FILTERTYPE_1DAY, SYNC_FILTERTYPE_3DAYS, SYNC_FILTERTYPE_1WEEK, SYNC_FILTERTYPE_2WEEKS,
// SYNC_FILTERTYPE_1MONTH, SYNC_FILTERTYPE_3MONTHS, SYNC_FILTERTYPE_6MONTHS
define('SYNC_FILTERTIME_MAX', SYNC_FILTERTYPE_ALL);
// Interval in seconds before checking if there are changes on the server when in Ping.
// It means the highest time span before a change is pushed to a mobile. Set it to
// a higher value if you have a high load on the server.
define('PING_INTERVAL', 30);
// Set the fileas (save as) order for contacts in the webaccess/webapp/outlook.
// It will only affect new/modified contacts on the mobile which then are synced to the server.
// Possible values are:
// SYNC_FILEAS_FIRSTLAST - fileas will be "Firstname Middlename Lastname"
// SYNC_FILEAS_LASTFIRST - fileas will be "Lastname, Firstname Middlename"
// SYNC_FILEAS_COMPANYONLY - fileas will be "Company"
// SYNC_FILEAS_COMPANYLAST - fileas will be "Company (Lastname, Firstname Middlename)"
// SYNC_FILEAS_COMPANYFIRST - fileas will be "Company (Firstname Middlename Lastname)"
// SYNC_FILEAS_LASTCOMPANY - fileas will be "Lastname, Firstname Middlename (Company)"
// SYNC_FILEAS_FIRSTCOMPANY - fileas will be "Firstname Middlename Lastname (Company)"
// The company-fileas will only be set if a contact has a company set. If one of
// company-fileas is selected and a contact doesn't have a company set, it will default
// to SYNC_FILEAS_FIRSTLAST or SYNC_FILEAS_LASTFIRST (depending on if last or first
// option is selected for company).
// If SYNC_FILEAS_COMPANYONLY is selected and company of the contact is not set
// SYNC_FILEAS_LASTFIRST will be used
define('FILEAS_ORDER', SYNC_FILEAS_LASTFIRST);
// Maximum amount of items to be synchronized per request.
// Normally this value is requested by the mobile. Common values are 5, 25, 50 or 100.
// Exporting too much items can cause mobile timeout on busy systems.
// Z-Push will use the lowest provided value, either set here or by the mobile.
// MS Outlook 2013+ request up to 512 items to accelerate the sync process.
// If you detect high load (also on subsystems) you could try a lower setting.
// max: 512 - value used if mobile does not limit amount of items
define('SYNC_MAX_ITEMS', 512);
// The devices usually send a list of supported properties for calendar and contact
// items. If a device does not includes such a supported property in Sync request,
// it means the property's value will be deleted on the server.
// However some devices do not send a list of supported properties. It is then impossible
// to tell if a property was deleted or it was not set at all if it does not appear in Sync.
// This parameter defines Z-Push behaviour during Sync if a device does not issue a list with
// supported properties.
// See also https://jira.z-hub.io/browse/ZP-302.
// Possible values:
// false - do not unset properties which are not sent during Sync (default)
// true - unset properties which are not sent during Sync
define('UNSET_UNDEFINED_PROPERTIES', false);
// ActiveSync specifies that a contact photo may not exceed 48 KB. This value is checked
// in the semantic sanity checks and contacts with larger photos are not synchronized.
// This limitation is not being followed by the ActiveSync clients which set much bigger
// contact photos. You can override the default value of the max photo size.
// default: 5242880 - 5 MB default max photo size in bytes
define('SYNC_CONTACTS_MAXPICTURESIZE', 5242880);
// Over the WebserviceUsers command it is possible to retrieve a list of all
// known devices and users on this Z-Push system. The authenticated user needs to have
// admin rights and a public folder must exist.
// In multicompany environments this enable an admin user of any company to retrieve
// this full list, so this feature is disabled by default. Enable with care.
define('ALLOW_WEBSERVICE_USERS_ACCESS', false);
// Users with many folders can use the 'partial foldersync' feature, where the server
// actively stops processing the folder list if it takes too long. Other requests are
// then redirected to the FolderSync to synchronize the remaining items.
// Device compatibility for this procedure is not fully understood.
// NOTE: THIS IS AN EXPERIMENTAL FEATURE WHICH COULD PREVENT YOUR MOBILES FROM SYNCHRONIZING.
define('USE_PARTIAL_FOLDERSYNC', false);
// The minimum accepted time in second that a ping command should last.
// It is strongly advised to keep this config to false. Some device
// might not be able to send a higher value than the one specificied here and thus
// unable to start a push connection.
// If set to false, there will be no lower bound to the ping lifetime.
// The minimum accepted value is 1 second. The maximum accepted value is 3540 seconds (59 minutes).
define('PING_LOWER_BOUND_LIFETIME', false);
// The maximum accepted time in second that a ping command should last.
// If set to false, there will be no higher bound to the ping lifetime.
// The minimum accepted value is 1 second. The maximum accepted value is 3540 seconds (59 minutes).
define('PING_HIGHER_BOUND_LIFETIME', false);
// Maximum response time
// Mobiles implement different timeouts to their TCP/IP connections. Android devices for example
// have a hard timeout of 30 seconds. If the server is not able to answer a request within this timeframe,
// the answer will not be recieved and the device will send a new one overloading the server.
// There are three categories
// - Short timeout - server has up within 30 seconds - is automatically applied for not categorized types
// - Medium timeout - server has up to 90 seconds to respond
// - Long timeout - server has up to 4 minutes to respond
// If a timeout is almost reached the server will break and sent the results it has until this
// point. You can add DeviceType strings to the categories.
// In general longer timeouts are better, because more data can be streamed at once.
define('SYNC_TIMEOUT_MEDIUM_DEVICETYPES', "SAMSUNGGTI");
define('SYNC_TIMEOUT_LONG_DEVICETYPES', "iPod, iPad, iPhone, WP, WindowsOutlook");
// Time in seconds the device should wait whenever the service is unavailable,
// e.g. when a backend service is unavailable.
// Z-Push sends a "Retry-After" header in the response with the here defined value.
// It is up to the device to respect or not this directive so even if this option is set,
// the device might not wait requested time frame.
// Number of seconds before retry, to disable set to: false
define('RETRY_AFTER_DELAY', 300);
/**********************************************************************************
* Backend settings
*/
// the backend data provider
define('BACKEND_PROVIDER', 'BackendIMAP');
/**********************************************************************************
* Search provider settings
*
* Alternative backend to perform SEARCH requests (GAL search)
* By default the main Backend defines the preferred search functionality.
* If set, the Search Provider will always be preferred.
* Use 'BackendSearchLDAP' to search in a LDAP directory (see backend/searchldap/config.php)
*/
define('SEARCH_PROVIDER', '');
// Time in seconds for the server search. Setting it too high might result in timeout.
// Setting it too low might not return all results. Default is 10.
define('SEARCH_WAIT', 10);
// The maximum number of results to send to the client. Setting it too high
// might result in timeout. Default is 10.
define('SEARCH_MAXRESULTS', 10);
/**********************************************************************************
* Kopano Outlook Extension - Settings
*
* The Kopano Outlook Extension (KOE) provides MS Outlook 2013 and newer with
* functionality not provided by ActiveSync or not implemented by Outlook.
* For more information, see: https://wiki.z-hub.io/x/z4Aa
*/
// Global Address Book functionality
define('KOE_CAPABILITY_GAB', true);
// Synchronize mail flags from the server to Outlook/KOE
define('KOE_CAPABILITY_RECEIVEFLAGS', true);
// Encode flags when sending from Outlook/KOE
define('KOE_CAPABILITY_SENDFLAGS', true);
// Out-of-office support
define('KOE_CAPABILITY_OOF', true);
// Out-of-office support with start & end times (superseeds KOE_CAPABILITY_OOF)
define('KOE_CAPABILITY_OOFTIMES', true);
// Notes support
define('KOE_CAPABILITY_NOTES', true);
// Shared folder support
define('KOE_CAPABILITY_SHAREDFOLDER', true);
// Send-As support for Outlook/KOE and mobiles
define('KOE_CAPABILITY_SENDAS', true);
// Secondary Contact folders (own and shared)
define('KOE_CAPABILITY_SECONDARYCONTACTS', true);
// Copy WebApp signature into KOE
define('KOE_CAPABILITY_SIGNATURES', true);
// Delivery receipt requests
define('KOE_CAPABILITY_RECEIPTS', true);
// To synchronize the GAB KOE, the GAB store and folderid need to be specified.
// Use the gab-sync script to generate this data. The name needs to
// match the config of the gab-sync script.
// More information here: https://wiki.z-hub.io/x/z4Aa (GAB Sync Script)
define('KOE_GAB_STORE', 'SYSTEM');
define('KOE_GAB_FOLDERID', '');
define('KOE_GAB_NAME', 'Z-Push-KOE-GAB');
/**********************************************************************************
* Synchronize additional folders to all mobiles
*
* With this feature, special folders can be synchronized to all mobiles.
* This is useful for e.g. global company contacts.
*
* This feature is supported only by certain devices, like iPhones.
* Check the compatibility list for supported devices:
* http://z-push.org/compatibility
*
* To synchronize a folder, add a section setting all parameters as below:
* store: the ressource where the folder is located.
* Kopano users use 'SYSTEM' for the 'Public Folder'
* folderid: folder id of the folder to be synchronized
* name: name to be displayed on the mobile device
* type: supported types are:
* SYNC_FOLDER_TYPE_USER_CONTACT
* SYNC_FOLDER_TYPE_USER_APPOINTMENT
* SYNC_FOLDER_TYPE_USER_TASK
* SYNC_FOLDER_TYPE_USER_MAIL
* SYNC_FOLDER_TYPE_USER_NOTE
*
* Additional notes:
* - on Kopano systems use backend/kopano/listfolders.php script to get a list
* of available folders
*
* - all Z-Push users must have at least reading permissions so the configured
* folders can be synchronized to the mobile. Else they are ignored.
*
* - this feature is only partly suitable for multi-tenancy environments,
* as ALL users from ALL tenents need access to the configured store & folder.
* When configuring a public folder, this will cause problems, as each user has
* a different public folder in his tenant, so the folder are not available.
* - changing this configuration could cause HIGH LOAD on the system, as all
* connected devices will be updated and load the data contained in the
* added/modified folders.
*/
$additionalFolders = array(
// demo entry for the synchronization of contacts from the public folder.
// uncomment (remove '/*' '*/') and fill in the folderid
/*
array(
'store' => "SYSTEM",
'folderid' => "",
'name' => "Public Contacts",
'type' => SYNC_FOLDER_TYPE_USER_CONTACT,
),
*/
);
```
### imap.php
```php
.
*
* Consult LICENSE file for details
************************************************/
// ************************
// BackendIMAP settings
// ************************
// Defines the server to which we want to connect
define('IMAP_SERVER', 'localhost');
// connecting to default port (143)
define('IMAP_PORT', '143');
// best cross-platform compatibility (see http://php.net/imap_open for options)
define('IMAP_OPTIONS', '/tls/norsh/novalidate-cert');
// Mark messages as read when moving to Trash.
// BE AWARE that you will lose the unread flag, but some mail clients do this so the Trash folder doesn't get boldened
define('IMAP_AUTOSEEN_ON_DELETE', false);
// IMPORTANT: BASIC IMAP FOLDERS [ask your mail admin]
// We can have diferent cases (case insensitive):
// 1.
// inbox
// sent
// drafts
// trash
// 2.
// inbox
// common.sent
// common.drafts
// common.trash
// 3.
// common.inbox
// common.sent
// common.drafts
// common.trash
// 4.
// common
// common.sent
// common.drafts
// common.trash
//
// gmail is a special case, where the default folders are under the [gmail] prefix and the folders defined by the user are under INBOX.
// This configuration seems to work:
// define('IMAP_FOLDER_PREFIX', '');
// define('IMAP_FOLDER_PREFIX_IN_INBOX', false);
// define('IMAP_FOLDER_INBOX', 'INBOX');
// define('IMAP_FOLDER_SENT', '[Gmail]/Sent');
// define('IMAP_FOLDER_DRAFT', '[Gmail]/Drafts');
// define('IMAP_FOLDER_TRASH', '[Gmail]/Trash');
// define('IMAP_FOLDER_SPAM', '[Gmail]/Spam');
// define('IMAP_FOLDER_ARCHIVE', '[Gmail]/All Mail');
// Since I know you won't configure this, I will raise an error unless you do.
// When configured set this to true to remove the error
define('IMAP_FOLDER_CONFIGURED', true);
// Folder prefix is the common part in your names (3, 4)
define('IMAP_FOLDER_PREFIX', '');
// Inbox will have the preffix preppend (3 & 4 to true)
define('IMAP_FOLDER_PREFIX_IN_INBOX', false);
// Inbox folder name (case doesn't matter) - (empty in 4)
define('IMAP_FOLDER_INBOX', 'INBOX');
// Sent folder name (case doesn't matter)
define('IMAP_FOLDER_SENT', 'SENT');
// Draft folder name (case doesn't matter)
define('IMAP_FOLDER_DRAFT', 'DRAFTS');
// Trash folder name (case doesn't matter)
define('IMAP_FOLDER_TRASH', 'TRASH');
// Spam folder name (case doesn't matter). Only showed as special by iOS devices
define('IMAP_FOLDER_SPAM', 'SPAM');
// Archive folder name (case doesn't matter). Only showed as special by iOS devices
define('IMAP_FOLDER_ARCHIVE', 'ARCHIVE');
// forward messages inline (default true - inlined)
define('IMAP_INLINE_FORWARD', true);
// list of folders we want to exclude from sync. Names, or part of it, separated by |
// example: dovecot.sieve|archive|spam
define('IMAP_EXCLUDED_FOLDERS', '');
// overwrite the "from" header with some value
// options:
// '' - do nothing, use the From header
// 'username' - the username will be set (usefull if your login is equal to your emailaddress)
// 'domain' - the value of the "domain" field is used
// 'sql' - the username will be the result of a sql query. REMEMBER TO INSTALL PHP-PDO AND PHP-DATABASE
// 'ldap' - the username will be the result of a ldap query. REMEMBER TO INSTALL PHP-LDAP!!
// '@mydomain.com' - the username is used and the given string will be appended
define('IMAP_DEFAULTFROM', '');
// DSN: formatted PDO connection string
// mysql:host=xxx;port=xxx;dbname=xxx
// USER: username to DB
// PASSWORD: password to DB
// OPTIONS: array with options needed
// QUERY: query to execute
// FIELDS: columns in the query
// FROM: string that will be the from, replacing the column names with the values
define('IMAP_FROM_SQL_DSN', '');
define('IMAP_FROM_SQL_USER', '');
define('IMAP_FROM_SQL_PASSWORD', '');
define('IMAP_FROM_SQL_OPTIONS', serialize(array(PDO::ATTR_PERSISTENT => true)));
define('IMAP_FROM_SQL_QUERY', "select first_name, last_name, mail_address from users where mail_address = '#username@#domain'");
define('IMAP_FROM_SQL_FIELDS', serialize(array('first_name', 'last_name', 'mail_address')));
define('IMAP_FROM_SQL_FROM', '#first_name #last_name <#mail_address>');
define('IMAP_FROM_SQL_FULLNAME', '#first_name #last_name');
// SERVER: ldap server
// SERVER_PORT: ldap port
// USER: dn to use for connecting
// PASSWORD: password
// QUERY: query to execute
// FIELDS: columns in the query
// FROM: string that will be the from, replacing the field names with the values
define('IMAP_FROM_LDAP_SERVER', 'localhost');
define('IMAP_FROM_LDAP_SERVER_PORT', '389');
define('IMAP_FROM_LDAP_USER', 'cn=zpush,ou=servers,dc=zpush,dc=org');
define('IMAP_FROM_LDAP_PASSWORD', 'password');
define('IMAP_FROM_LDAP_BASE', 'dc=zpush,dc=org');
define('IMAP_FROM_LDAP_QUERY', '(mail=#username@#domain)');
define('IMAP_FROM_LDAP_FIELDS', serialize(array('givenname', 'sn', 'mail')));
define('IMAP_FROM_LDAP_FROM', '#givenname #sn <#mail>');
define('IMAP_FROM_LDAP_FULLNAME', '#givenname #sn');
// Method used for sending mail
// mail => mail() php function
// sendmail => sendmail executable
// smtp => direct connection against SMTP
define('IMAP_SMTP_METHOD', 'smtp');
global $imap_smtp_params;
// SMTP Parameters
// mail : no params
$imap_smtp_params = array('host' => 'tls://localhost', 'port' => '465', 'auth' => true, 'username' => 'imap_username', 'password' => 'imap_password', 'verify_peer_name' => false, 'verify_peer' => false, 'allow_self_signed' => true);
// sendmail
//$imap_smtp_params = array('sendmail_path' => '/usr/bin/sendmail', 'sendmail_args' => '-i');
// smtp
// "host" - The server to connect. Default is localhost.
// "port" - The port to connect. Default is 25.
// "auth" - Whether or not to use SMTP authentication. Default is FALSE.
// "username" - The username to use for SMTP authentication. "imap_username" for using the same username as the imap server
// "password" - The password to use for SMTP authentication. "imap_password" for using the same password as the imap server
// "localhost" - The value to give when sending EHLO or HELO. Default is localhost
// "timeout" - The SMTP connection timeout. Default is NULL (no timeout).
// "verp" - Whether to use VERP or not. Default is FALSE.
// "debug" - Whether to enable SMTP debug mode or not. Default is FALSE.
// "persist" - Indicates whether or not the SMTP connection should persist over multiple calls to the send() method.
// "pipelining" - Indicates whether or not the SMTP commands pipelining should be used.
// "verify_peer" - Require verification of SSL certificate used. Default is TRUE.
// "verify_peer_name" - Require verification of peer name. Default is TRUE.
// "allow_self_signed" - Allow self-signed certificates. Requires verify_peer. Default is FALSE.
//$imap_smtp_params = array('host' => 'localhost', 'port' => 25, 'auth' => false);
// If you want to use SSL with port 25 or port 465 you must preppend "ssl://" before the hostname or IP of your SMTP server
// IMPORTANT: To use SSL you must use PHP 5.1 or later, install openssl libs and use ssl:// within the host variable
// IMPORTANT: To use SSL with PHP 5.6 you should set verify_peer, verify_peer_name and allow_self_signed
//$imap_smtp_params = array('host' => 'ssl://localhost', 'port' => 465, 'auth' => true, 'username' => 'imap_username', 'password' => 'imap_password');
// If you are using IMAP_SMTP_METHOD = mail or sendmail and your sent messages are not correctly displayed you can change this to "\n".
// BUT, it doesn't comply with RFC 2822 and will break if using smtp method
define('MAIL_MIMEPART_CRLF', "\r\n");
// A file containing file mime types->extension mappings.
// SELINUX users: make sure the file has a security context accesible by your apache/php-fpm process
define('SYSTEM_MIME_TYPES_MAPPING', '/etc/mime.types');
// Use BackendCalDAV for Meetings. You cannot hope to get that functionality working without a caldav backend.
define('IMAP_MEETING_USE_CALDAV', false);
```