https://github.com/MagicSorter/magic-sorter-files

This repository holds all the STL files used by the sorter
https://github.com/MagicSorter/magic-sorter-files

Last synced: about 5 hours ago
JSON representation

This repository holds all the STL files used by the sorter

• Host: GitHub
• URL: https://github.com/MagicSorter/magic-sorter-files
• Owner: MagicSorter
• Created: 2023-04-28T08:27:24.000Z (over 1 year ago)
• Default Branch: main
• Last Pushed: 2024-10-29T14:27:14.000Z (about 1 month ago)
• Last Synced: 2024-10-29T17:35:52.373Z (about 1 month ago)
• Size: 605 KB
• Stars: 5
• Watchers: 2
• Forks: 1
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

• stars - magic-sorter-files
• stars - magic-sorter-files

README

        
# Magic Sorter STL files

This repository holds all the STL files used by the sorter

# Material

All parts are printed in PLA except the following ones:  

## Heat resistant materials

For these parts you should use a more resistant material such as PETG or ASA, since they will be in close contact with the motors and their heat would deform the plastic part:

  - Z STRESS RELIEF.stl

  - ARM Z LARGE.stl

  

## Impact resistant parts

Camera parts should be printed using PETG, since over time they could sag.

# Brim, raft, supports

None of the parts require supports, brim or raft. Depending on your 3D printer, however, you might want to add some brim to the smaller parts, to increase adhesion to the build plate.

# Post-processing

Some parts are designed with an hole that is slightly smaller than the required one, since it would be impossible to achieve the perfect diameter while printing.  

You'll have to re-drill the hole of the following parts:

 - SEPARATOR DYNAMIC.stl (12 mm)