Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/Muvon/yoda

Simple tool to dockerize and manage deployment of your project
https://github.com/Muvon/yoda

automation container deploy deployment docker docker-compose tool yoda

Last synced: 10 days ago
JSON representation

Simple tool to dockerize and manage deployment of your project

Awesome Lists containing this project

README 

        
# Yoda

Simple tool to dockerize and manage deployment of your project  



![Alt text](/img/yoda.jpg?raw=true "Help you deploy I will")  



## What is it?

Yoda helps you to dockerize existing application and automate deployment process.



1. Only BASH. No dependency shit!

2. Requirements: git, docker with compose plugin

3. Its simple like simplicity itself

4. Runs on MACOS and Linux systems



## Installation

First you need to install Yoda on your laptop. Its supereasy:



```bash

git clone [email protected]:muvon/yoda.git

cd yoda && make check && sudo make install

```



Remember that you need bash version 4 or higher installed at least and GNU implementation of the sed.



## Knowledge requirements

1. [Docker](https://docs.docker.com) and its main concept

2. [Image and container](https://docs.docker.com/engine/userguide/storagedriver/imagesandcontainers/) understanding

3. You know [Docker Compose](https://docs.docker.com/compose/overview/) and [its file syntax](https://docs.docker.com/compose/compose-file/).



## Usage example

OK. You have git repository with your project.  

Go into this folder and run this command to initialize environment.



```bash

yoda init

```



Now you will get **docker** folder created in your project.  

Next step is prepare Dockerfile that located in docker/images folder.  

You can setup docker build options in file docker/Buildfile.



Now you can add container to your project.



```bash

yoda add container-name

```



Change template for docker-compose.yml file in docker/containers/container-name/container.yml.



We are done. Build it and start with just one command now:



```bash

yoda start

```



Done!



## Philosophy

1. You can have several images for single project.

2. Each image you use must have Dockerfile located in docker/images folder and named by convention: Dockerfile-{name}.

3. You can have several containers depends on one image.

4. Each container has own folder in docker/containers with structure followed by convention in this README.

5. You can setup and use any BASH variables in file docker/env.sh. Its pregenerated for you.

6. Envfile is main file that has all info about what should be built and in which environment, also what server runs which environment for deploy.

7. Each container can be scaled N times and started using single template but different names.

8. You can fully customize deploy, build, compose stages just wrapping in your own script using any language.



##  Init folder structure

When you do yoda init in your project it creates by default yoda folder. This folder has following structure



| Path | Description |

|---|---|

| containers | This folder contains all containers with templates in your project |

| images | It contains Dockerfiles for you images. Common naming is: Dockerfile-name. Where is name is just name of image you build with that dockerfile |

| env.sh | Its environment for your building context. You can define custom variables and use it everywhere in builds and other scripts. Its common for every environments you have. Optionally you can create special file for current environment. For example env.dev.sh. And this file will be read right after common file env.sh was read. |

| Buildfile | It is declarative file that describes how to build each image you have. It has simple structure **name: arguments for docker build command** where is name is your image in images folder with same name. You can uses custom context also just in the format **name[context]: arguments for docker build command**. By default we use current dir as context for building  |

| Envfile | It describes all environments and link servers for deploy with its environments you have. No limitation. You can create own environments and describe what containers must be built there |



### Path: containers

When you adding new container folder is created here with same name. For example if you add container with name **container**. Same folder will appear here.  

This folder will contain some files.



| File | Description |

|---|---|

| container.yml | Its docker compose section without section name that describes how to build container. This file used to generate whole docker-compose.yml file for starting services |

| container.[env].yml | Optional you can create file with template that will be used when docker-compose.yml is generated for this environment. For example if you have container.dev.yml and starting services in dev environment will use all keys from this file replacing common container.yml keys|

| entrypoint | Its entrypoint for you container. Its optional but good practise to use this file as executable for your container starting point |



#### What is container.yml

This file contains valid docker compose section for current service. container_name is immutable and declared by Yoda internally. You can specify image key here with shortcut to image from Buildfile. For example if your Buildfile describe image with key "base" you can put here just **image: base** and Yoda automatic will replace base to image from build params specified in Buildfile.



### Path: env.sh

Here you can declare BASH environment variables and use it everywhere.  



For example you can write here IMAGE_NAME to set image name with revision and other staff and use it in Buildfile and container.yml.  



If you need custom env.sh file for environment you can just create it with name as env.dev.sh that will extend default env.sh file with new variables defined there.



Take a noticy that environment support namespaces for example production.server1 and production.server2. One server cannot hold 2 namespaces so to use custom env.sh in this case just use env.production.sh without namespace of each server.



### Path: Buildfile

Its simple file that have following structure:



```yaml

base: -t $IMAGE_BASE --compress

db: -t postgres:9.5

```



Each line contains image name and build args that will be passed in **docker build** command. See more info in **docker build --help**.



### Path: Envfile

Its simple file YAML like with environment and server description:



```yaml

user@server: production

production: container1 container2=2

dev: container1

```

Example file above declare server **user@server** that will be deployed as **production**. And production will contain one container1 and two container2 instances.  

And in dev environment only one container with name container1 will be started.



Or in case of multiservers we use like this



```yaml

user@server1: production.stack1

user@server2: production.stack2

production.stack1: container1 container2=2

production.stack2: container3 container4

dev: container1

```



In that case almost the same. Dot (.) allows us to separate namespaces and customize which services we use for one server and which for another. In that case we still have **production** environment. All that goes after dot (.) is about namespace of environment.



## Path: Startfile

This file allow you to manage flow of start your complex service.  



```yaml

dev:

  flow: deploy container2 container1=2

  stop: container2

  wait: deploy

production.ns1:

  flow: deploy container2 container1=2

  stop: container2

  wait: deploy

production.ns2:

  flow: deploy container2 container1=2

  stop: container2

  wait: deploy

```

- **flow** - It declares flow of starting services. It contains container or container=chunk where is chunk - number that divide starting by chunks

- **stop** - each service represented here will be stopped before start

- **wait** - After run up command with container sometimes you need to wait for exit code of it. This section declares which containers we should wait for



In this example you [yoda start](#yoda-start-options-container) command first will stop container2 if its running.  

After that it will start deploy, then container2 and then container1 services will be started as chunks by 2.  

Also we wait for exit code for deploy container.



Take a notice in case if you use multiserver and namespaces in environment you have to describe each environment with namespace sepately because all of them independent in flow.



## Path: docker/.yodarc

This is locked environment file for yoda inited in current project with yoda version and other useful common files. Please dont edit this file because it rewrites on yoda upgrade.  



If you want you can redefine all variables in [env.sh](#path-envsh) file.  



## Yoda command line tool usage

```bash

yoda command arguments

```



Commands available:  



| Command | Description |

|---|---|

| [version](#yoda-version) | Display version of Yoda |

| [help](#yoda-help) | Display this information |

| [init](#yoda-init-folder) | Prepare deployment folder in project |

| [upgrade](#yoda-upgrade) | Upgrade to new version of initialized Yoda in project |

| [add](#yoda-add-container) |  Add new container skeleton structure to project |

| [delete](#yoda-delete-container) | Delete existing container from project |

| [build](#yoda-build-options-images) |  Build images for current project |

| [compose](#yoda-compose-compose_script) |  Display generated compose file for current environment |

| [start](#yoda-start-options-container) |  Start all services for current project |

| [stop](#yoda-stop-container) | Stop all services for current project |

| [status](#yoda-status) | Display current status of services |

| [log](#yoda-log-container) | Show log for a given container |

| [logs](#yoda-logs) | Show log for all containers |

| [exec](#yoda-exec-container) | Execute a given command in a container |

| [enter](#yoda-enter-container) | Enter into a container with one of autodetected shell: zsh, bash or sh |

| [setup](#yoda-setup-options) | Setup server to be read for use with yoda deployment system |

| [deploy](#yoda-deploy-options) | Deploy project on one or all nodes |

| [rollback](#yoda-rollback-options) | Rollback project on one or all nodes to previous revision |

| [destroy](#yoda-destroy) | Remove all created services by start command and all local images with volumes |



### yoda version

Display current Yoda version



### yoda help

Display help information



### yoda init [folder]

Prepare dockerized skeleton in project directory



| Command | Description | Default |

|---|---|---|

| folder | Initialize all structure in folder with that name | yoda |



### yoda upgrade

Upgrade to new version of initialized Yoda in project.



### yoda add [CONTAINER...]

Add container or bunch of containers skeleton to project



### yoda delete [CONTAINER...]

Delete container or bunch of existing containers from project



### yoda build [options] [IMAGES...]

Build images for current project. You can pass optional images you want to build. Default is every image from Buildfile.

Options are:



| Options | Description | Default |

|---|---|:---:|

| --rebuild | Force build also if image exists already | omitted |

| --no-cache | Dont use Dockerfile cache when building images. | omitted |

| --push | Should we push built images to repository if we have REPOSITORY_URL defined in [env.sh](#path-envsh) file | omitted |



### yoda compose [COMPOSE_SCRIPT]

Display generated docker compose file in stdout.



| Command | Description | Default |

|---|---|:---:|

| COMPOSE_SCRIPT | Executable script who will process each container template, replace something and return as plain text. Container templates goes to stdin and 2 addition arguments are passed: --name and --sequence so name of container and number in scale map | - |



### yoda start [options] [CONTAINER...]

Start all containers or only passed with arguments

Options are:



| Options | Description | Default |

|---|---|:---:|

| --rebuild | Rebuild all images also if they exist with that revision | omitted |

| --no-cache | Dont use Dockerfile cache on building images stage. It passes internally to build command | omitted |

| --recreate | Force recreate containers |

| --force | Should start containers excluding Startfile flow description |



You also can manager flow of start and restart of you containers using [Startfile](#path-startfile)  



### yoda stop [CONTAINER...]

Stop all containers or only passed with arguments



### yoda status

Display current status of services



### yoda log CONTAINER...

Show log for a given container



### yoda logs

Show log for all containers



### yoda exec CONTAINER... command

Execute a given command in a container



### yoda enter CONTAINER...

Enter into a container with one of autodetected shell: zsh, bash or sh



### yoda setup [options]

Setup server before it can be used for environment. You can use only Centos 8 distribution. Otherwise you have to setup it in manual mode. Before deploy put your authorized_keys to server folder.



| Options | Description | Default |

|---|---|:---:|

| --env | Setup single host or use host regexp pattern (Envfile will be used) | - |

| --host | Setup all servers in environment (Envfile will be used) | - |



### yoda deploy [options]

Deploy single-node or whole cluster

It exit with code 0 for success and 1 for failure (if something went wrong also on one node of all).

Options are:



| Options | Description | Default |

|---|---|:---:|

| --host | Deploy on single host or using host regexp pattern (Envfile will be used) | - |

| --env | Deploy on all nodes with that environment (Envfile will be used) | - |

| --stack | Deploy only this stack in current environment | - |

| --rev | Set custom revision to be deployed or rollback to | - |

| --branch | What branch will be deployed. | master |

| --args | Custom environment arguments that will be passed to 'yoda start' command on each remote server to be deployed | - |

| --force | Pass this flag to [yoda start](#yoda-start-options-container) command



### yoda rollback [options]

Rollback to previous revision

It exit with code 0 for success and 1 for failure (if something went wrong also on one node of all).

Options are the same as for deploy command.



### yoda destroy

Remove all created services by start command and all local images with volumes