Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/NewEraCracker/LOIC

Deprecated - Low Orbit Ion Cannon - An open source network stress tool, written in C#. Based on Praetox's LOIC project. USE ON YOUR OWN RISK. WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. IF YOU GET V& IT IS YOUR FAULT.
https://github.com/NewEraCracker/LOIC

c-sharp loic praetox-loic

Last synced: 3 months ago
JSON representation

Deprecated - Low Orbit Ion Cannon - An open source network stress tool, written in C#. Based on Praetox's LOIC project. USE ON YOUR OWN RISK. WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. IF YOU GET V& IT IS YOUR FAULT.

Awesome Lists containing this project

README 

        
==========

|| INFO ||

==========



Low Orbit Ion Cannon - An open source network stress tool. Written in C#

Based on Praetox's loic project at https://sourceforge.net/projects/loic/. 



================

|| Help - dox ||

================



There is now  an online help available. Press , read the .chm file or got in the source to the help/web folder and read there!



================

|| DISCLAIMER ||

================



I, NewEraCracker, am not responsible for the use that you give to this tool.

You cannot blame me if you use this tool to attack servers you don't own and get caught.

This tool is released for educational purposes only and comes with no warranty at all.



===========================

|| HOW TO RUN IN WINDOWS ||

===========================



GET THE BINARIES!



Requires Microsoft .NET Framework 3.5 Service Pack 1 available at

http://www.microsoft.com/downloads/en/details.aspx?FamilyID=ab99342f-5d1a-413d-8319-81da479ab0d7&displaylang=en



=========================

|| HOW TO RUN IN LINUX ||

=========================



You'll need mono and log4net:



# sudo apt-get install mono liblog4net-cil-dev



Then, build it:



# mdtool build



And run it!



# bin/Debug/LOIC.exe



==========================

|| HIVEMIND/HIDDEN MODE ||

==========================



HIVE MIND mode will connect your client to an IRC server so it can be controlled

remotely. Think of it like a voluntary botnet. They might even make your client

do naughty things, so beware.



Note: It does NOT allow remote administration of your machine, or anything shit

like that, it is literally just control of loic itself.



If you want to start up in hivemind, run like this:

 LOIC.exe /hivemind irc.server.address

It will connect to irc://irc.server.adress:6667/loic



You can also specify port and channel

 LOIC.exe /hivemind irc.server.address 1234 #secret

It will connect to irc://irc.server.adress:1234/secret



In order to do hivemind hidden run like this:

 LOIC.exe /hidden /hivemind irc.server.address

It will connect to irc://irc.server.adress:6667/loic without any visible GUI



==============================

|| CONTROLING LOIC FROM IRC ||

==============================



As an OP, Admin or Owner set a channel topic or type message with (as an example):

!lazor targetip=127.0.0.1 message=test_test port=80 method=tcp wait=false random=true



To start attack type

!lazor start



Or just append "start" in the END of the topic

!lazor targetip=127.0.0.1 message=test_test port=80 method=tcp wait=false random=true start



To reset options back to default:

!lazor default



To stop attack:

!lazor stop



And remove "start" from topic (if exists)

You can also replace "start" by "stop" in the END of the topic.



Take a look at source for more details.



==================================

|| CONTROLING LOIC OVER THE WEB ||

==================================



>> Press  for easy copy & paste of HiveMind / OverLord Settings <<



The OverLord-Mode is meant as a Fail-Save mechanism to allow easy (de)centralised control in exactly the same way as HiveMind does.



The information is encoded into hyperlinks and allows though an easy and secure distribution way. 

!!URL-Shortener and Redirectors are fully supported!!



-SYNTAX-

There are 3 Methods:

---



I. Plain-Text Links: can ONLY specify TARGETS

"LOIC: {OL-URI}"



---



II: a-href Links: 

II.a: Back-Up Mirrors - they contain no target information and point to sites, where target are posted.

'class="LO bu" href="{URI}"' - read diretion top to bottom

'class="LO bu r" href="{URI}"' - read direcion bottom to top



the read direction depends on the site: e.g. for twitter, where the newest post is on the top, you want to scan the site top-to-bottom for targets.

On Blogs / Boards where the newest posts are at the bottom, you want to scan in the reverse direction.



In the GUI the checkbox "Up?" scans top-to-bottom if checked and reverse otherwise.



The scan stops at the first encountered target and uses this as the current target - all BackUp Mirrors up to this point are stored. (mirrors after the 1st target in read-direction are ignored)



II.b: Target-Links

'class="LO tar" href="{OL-URI}"'



---



III. Plain Text instruction (this is depreciated)

"[LOIC]

{command}:{value}

{command}:{value}

...

[/LOIC]"



if there is a "lot" of html-code merged into the text it is best to use the "@"-Delimeter:

"[LOIC]@{command}:{value}@@{command}:{value}@......[/LOIC]"



---------



The URI-Syntax for Targets:

{OL-URI} = {URI}@{command}={value}@{single_sign}@{command}={value}@...



IT IS HIGHLY RECOMMENDED TO USE URL-SHORTENER FOR THE TARGET-COMMANDS!!



---



Commands: THESE APPLY ONLY TO TARGET-LINKS as in method II.b or PLAINT Text as in method III!!!!!

(there are 2 new commands - the others are the same as on IRC)



targetip, targethost, timeout, subsite, message, port, method, threads, wait, random, speed



hivemind - let's you set an Hive-Mind-Server over OverLord: @hivemind=irc.cooldomin.heros:6667#hivemind@

if this command is used the control is immediately transferred to the HiveMind! (aka: OverLord STOPS working!)

therefor the hivemind command is best used alone without other commands.



time - you can set a timer for the beginning of the fun: @time=YYYY/MM/DD HH:mm@ (time-zone is UTC for the time - the time-zone-correction is done by the client according to the system-settings and time!)

if a time command is issued the current attack stops and the Lazor waits until the time is reached. the target-information is updated once again EXACTLY at the beginning of the attack.



Using this it is possible, to set a time for all "connected" lazors WITHOUT revealing the target:

1. http://hive.mind/go.hp?@time=2010/05/23 15:00@

at 14:55 (UTC) you just change the Link to: http://hive.mind/go.hp?@time=2010/05/23 15:00@&@targetip=127.0.0.1@



-------------------



... enough with the crap - a real world example:

On site http://main.com is the command center where you don't want to post target-information:

put somewhere on your site (in a .php / .txt / .html / .js or whatever file you have) the Back-Up-Mirrors for your OP:



&nbsp

&nbsp

&nbsp

&nbsp



As soon as one mirror fails the next is taken - the mirrors are accumulated at the client - so you can change them or add more atfer the majority of the nodes have read them once! .. Back-Up-Mirrors are only removed from the client, if one seems to be offline. (the effects of the Stress-Test on the client machine is (to some degree) mitigated!)



it might be a good idea, to hide the "LO"-Class with a (inline-) CSS or put it into any hidden container ... or just leave as is :D



ATTENTION: Backup Mirrors + Targets in one Page!

Pay attention to the scan-direction! If you read top-to-bottom (Up? = checked in the GUI) you HAVE TO PUT your mirrors BEFORE the first target-link!

if you scan reverse you have to put the mirrors BELOW the target!



e.g. Scanning REVERSE + Mixed-Mode



your very long paragraph LOIC: http://bit.ly/abcde your paragraph contniues on for ours



&nbsp



that's pretty much it xD