https://github.com/TomW1605/SV07_Klipper_config

https://github.com/TomW1605/SV07_Klipper_config

Last synced: 6 days ago
JSON representation

• Host: GitHub
• URL: https://github.com/TomW1605/SV07_Klipper_config
• Owner: TomW1605
• Created: 2023-08-09T02:12:59.000Z (over 1 year ago)
• Default Branch: main
• Last Pushed: 2023-09-30T05:32:58.000Z (about 1 year ago)
• Last Synced: 2024-08-01T21:54:36.973Z (3 months ago)
• Size: 84 KB
• Stars: 6
• Watchers: 1
• Forks: 2
• Open Issues: 1
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# SV07 Klipper Config

I recently got an SV07 and immediately proceeded to mess up my config (accidentally changed a pin). I then had an incredibly hard time getting a stock copy of the config from Sovol and could not find it anywhere online.

So to help others that may run into the same issue (and myself when I inevitably need it again) I am uploading my config here including some changes I have made.

### Changes

This is not the stock config but the changes I have made I feel improve the UX of the printer.

These changes include:

- Changing the hot end LED to be a toggle not a brightness slider. The stock config had the PWM frequency set to a 5 second cycle so you couldn't control brightness anyway.

- Added a macro for toggling the hot end LED.

- Added an override for M106 and M107 to also use the large fan on the back.

- Added a toggle that enables and disables the large fan (this requires the [Virtual Pins klipper module](https://github.com/pedrolamas/klipper-virtual-pins)). When switched off it will turn the fan off and when switched on it will set the fan to the same speed as the normal extruder fan.

## SuperSlicer Config

I have added my SuperSlicer config for the SV07, this is a modified version of the SV06 config recently added to Pruser Slicer. Since I am mostly focusing on quality I have not tuned these print settings for speed. I have also only tested the 0.2mm layer height preset but the rest should work.

I also used the bed texture and model from the SV06. The config is set to use the files from Pruser Slicer if they are there but if not I have included the svg and stl files here as well.