Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/VoodooSMBus/VoodooRMI

Synaptic Trackpad driver over SMBus/I2C for macOS
https://github.com/VoodooSMBus/VoodooRMI

i2c macos smbus synaptic synaptic-trackpad

Last synced: about 2 months ago
JSON representation

Synaptic Trackpad driver over SMBus/I2C for macOS

Awesome Lists containing this project

README 

        
# VoodooRMI



[![Gitter](https://badges.gitter.im/VoodooSMBus/dev.svg)](https://gitter.im/VoodooSMBus/dev?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge)



A port for macOS of Synaptic's RMI Trackpad driver from Linux. This works for both I2C HID trackpads from Synaptic as well as Synaptic's SMBus trackpads. When following the instructions below, make sure you only select I2C or SMBus depending on your trackpad's capabilities.



## Supported Features

* Force Touch emulation

* 3 and 4 finger gestures

* Trackpoint over PS2 Passthrough

* SMBus or I2C communication



## Compatibility



Synaptic trackpads generally work over SMBus or I2C, though not both. Pay close attention to which bus it works over.



**SMBus**  



macOS (Requires Acidanthera's VoodooPS2 version 2.2.0 or above):

* Look in IORegistryExplorer under `ApplePS2SynapticsTrackpad`, and look for the value `Intertouch Support=True`

* Look for "VoodooPS2Trackpad: Trackpad supports SMBus operation" within macOS logs (may need to use `sudo dmesg` to see this)



Windows:

* Check under Device Manager for a Synaptics SMBus device



![](/docs/images/Windows-SMBus-Device.png)



Linux:

* If you are using intertouch (i.e. psmouse.intertouch=1) for your synaptics trackpad, then it's compatible

* Get `i2c-tools` from your package manager. Run `i2cdetect -l`, and note the number for SMBus (It's usually zero). Run `i2cdetect #` where # is the number you got from running the prior command. Synaptic devices are always at address 0x2c, so check at that address for anything other than `--`. It will usually appear as `UU` in my experiance if it's a Synaptics device.

  * If the trackpad does not show up, there is a chance that it will still work. There have been one or two examples of the trackpad not showing up but still being compatible.

* Likely compatible if you run `dmesg` and find a message along the lines of `"Your touchpad x says it can support a different bus."` and it's a Synaptics trackpad.



**I2C**



macOS:

* If you already have VoodooI2CHID installed, check folllowing values in IORegistry

  * `VoodooI2CHIDDevice` has `HIDDescriptor` containing `VendorID` `0x6cb`, or

  * Parent device of `VoodooI2CHIDDevice` has `name` containing `SYN` or `SYNA`



Windows:

* Check for `HID-compliant touch pad` in device manager

  * In properties, verify `General` - `location` is `on I2C HID Device`  and `Details` - `Hardware Ids` contains `VID_06CB` (or `SYN`, `SYNA`)



Linux:

* Check for the presence of `i2c-SYN` in `dmesg`.

* Get `i2c-tools` from your package manager, and use the `i2cdetect` tool to see if there are any devices at address 0x2c for any bus that isn't SMBus. If you see it under SMBus, I'd use SMBus as the trackpad seemingly operates better under SMBus!



## Requirements



**SMBus**

* [Acidanthera's VoodooPS2 >= 2.2.0](https://github.com/acidanthera/VoodooPS2)

  * Version >= 2.2.5 is recommended for HP devices with multiplexed PS2 Controllers (Some of the HP Elitebook lineup for example)

* [VoodooSMBus](https://github.com/VoodooSMBus/VoodooSMBus)

  * VoodooRMI releases (for now) include VoodooSMBus. If you are building VoodooSMBus yourself, build from the Dev branch of the VoodooSMBus git repo.



**I2C**

* [VoodooI2C](https://github.com/VoodooI2C/VoodooI2C) 2.5 or newer is required

  * Follow their [Documentation](https://voodooi2c.github.io) to identify if you need GPIO pinning.

  * Polling mode should just work

* If your device's ACPI name is not included below or marked as unknown, you may add it yourself and create a PR/issue



| Name | Main function |

|---|---|

| `SYN1B7F`  | F12 |

| `SYNA0000` | F11 |

| `SYNA1202` | F12 |

| `SYNA2393` | unknown |

| `SYNA2B2C` | F12 |

| `SYNA2B31` | F12 |

| `SYNA2B33` | F11 |

| `SYNA2B5A` | F12 |

| `SYNA2B61` | F11 |

| `SYNA2B34` | unknown |

| `SYN3054`  | F11 |

| `SYNA3083` | F12 |

| `SYNA3105` | unknown |

| `SYNA328B` | F12 |

| `SYNA328E` | F12 |

| `SYNA3602` | unknown |

| `SYNA7500` | unknown |

| `SYNA7501` | unknown |

| `SYNA7DAB` | F12 |

| `SYNA7DB5` | F12 |



## Installation

1) Add the required kexts to your bootloader

2) Make sure VoodooPS2 is configured as below:

    * Enabled:

        * VoodooPS2Controller.kext

        * VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Mouse.kext

        * VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Keyboard.kext

        * VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Trackpad.kext

    * Disabled:

        * VoodooPS2Controller.kext/Contents/PlugIns/VoodooInput.kext

4) For OpenCore users, make sure to add the below kexts in the order they're listed into your config.plist.

    * VoodooRMI.kext

    * VoodooRMI.kext/Contents/PlugIns/VoodooInput.kext

    * SMBus trackpads:

        * VoodooSMBus.kext

        * VoodooRMI.kext/Contents/PlugIns/RMISMBus.kext

    * I2C trackpads:

        * VoodooI2C.kext

        * VoodooRMI.kext/Contents/PlugIns/RMII2C.kext



There is no support for this kext being loaded into Library/Extensions or System/Library/Extensions. This likely won't break loading it, but test with injection first before sending in a bug report.



## Configuration



The values below can be edited under Info.plist within the kext itself - these can be changed without recompiling  

**Note** that using non-integer value causes undefined behaviour which may prevent the kext from loading



| Value | Default | Description |

| ----- | ------- | ----------- |

| `ForceTouchType` | 1 | Controls how force touch emulation behaves. 0 = Disabled, 1 = Clickpad press with size threshold, 2 = size threshold only |

| `ForceTouchMinPressure` | 90 | Minimum z value to trigger Force touch when clickpad is clicked |

| `DisableWhileTypingTimeout` | 250 | Milliseconds after typing in which to reject trackpad packets |

| `DisableWhileTrackpointTimeout` | 250 | Milliseconds after using the trackpoint in which to reject trackpad packets |

| `TrackpointMultiplier` | 20 | Multiplier used on trackpoint inputs (other than scrolling). This is divided by 20, so the default value of 20 will not change the output value at all |

| `TrackpointScrollMultiplierX` | 20 | Multiplier used on the x axis when middle button is held down for scrolling. This is divided by 20. |

| `TrackpointScrollMultiplierY` | 20 | Same as the above, except applied to the Y axis |

| `TrackpointDeadzone` | 1 | Minimum value at which trackpoint reports will be accepted. This is subtracted from the input of the trackpoint, so setting this extremely high will reduce trackpoint resolution |

| `MinYDiffThumbDetection` | 200 | Minimum distance between the second lowest and lowest finger in which Minimum Y logic is used to detect the thumb rather than using the z value from the trackpad. Setting this higher means that the thumb must be farther from the other fingers before the y coordinate is used to detect the thumb, rather than using finger area. Keeping this smaller is preferable as finger area logic seems to only be useful when all 4 fingers are grouped together closely, where the thumb is more likely to be pressing down more |

| `FingerMajorMinorDiffMax` | 10 | Max difference between the width and height of a touch input before it's invalid |

| `PalmRejectionWidth` | 10 | Percent (out of 100) width of trackpad which is used for palm rejection on the left and right side of the trackpad |

| `PalmRejectionWidth` | 60 | Percent (out of 100) height of trackpad which is used for palm rejection on the left and right side of the trackpad (starting from the top) |

| `PalmRejectionTrackpointHeight` | 20 | Percent (out of 100) height of trackpad which is used for palm rejection across the top of the trackpad |



Note that you can use Rehabman's ioio to set properties temporarily (until the next reboot).  

`ioio -s RMIBus ForceTouchEmulation false`



## Building

1) `git submodule update --init --recursive`

2) `git clone --depth 1 https://github.com/acidanthera/MacKernelSDK`

2) Build within XCode using the play button in the top left

    * RMISMBus/RMII2C will automatically build when building VoodooRMI



## Loading/Unloading

For loading, you may need to put RMII2C/RMISMBus's dependencies into the kextload command. Note that RMISMBus/RMII2C *depend* on VoodooRMI.



The below examples assume VoodooSMBus/VoodooI2C are in the same folder as VoodooRMI. If they are not, you will need to give the path to those kexts.

When manually loading from within macOS, keep in mind that csrutil needs to be partially disabled to allow unsigned kexts, and the kexts need to be owned by Root.



#### Changing owner of kext

```

// Note that this changes the owner of every kext in the directory your in

sudo chown -R root:wheel *.kext

```

#### Manually loading kext



Example for SMBus:

```

cd path/to/unziped-VoodooRMI_Debug

sudo kextutil -vvvv -d VoodooRMI.kext -d VoodooSMBus.kext VoodooRMI.kext/Contents/PlugIns/RMISMBus.kext

```

Example for I2C:

```

sudo kextutil -vvvv -d VoodooRMI.kext -d VoodooI2C.kext VoodooRMI.kext/Contents/PlugIns/RMII2C.kext

```



For unloading, you can use the bundle ids. This should unload cleanly, though you may need to unload twice in a row to get it to cooperate.

```

sudo kextunload -vvvv -b com.1Revenger1.RMISMBus -b com.1Revenger1.VoodooRMI

```



## Troubleshooting



Before creating an issue, please check the below:

1) Make sure VoodooSMBus/VoodooI2C is loading and attaching

    * [VoodooSMBus Troubleshooting](https://github.com/VoodooSMBus/VoodooSMBus/tree/dev#voodoosmbus-does-not-load)

    * [VoodooI2C Troubleshooting](https://voodooi2c.github.io/#Troubleshooting/Troubleshooting)

2) Make sure VoodooInput and VoodooPS2Trackpad is loading

    * `kextstat | grep Voodoo`

3) You may need to do IRQ patching on Haswell and older devices for SMBus trackpads

    * Required if the `SBUS` device does not have any IOInterruptControllers in IORegistryExplorer

    * [CorpNewt's SSDTTime](https://github.com/corpnewt/SSDTTime) can do this automatically for you



If the above are loading, next place to check is within the IORegistry and within VoodooRMI logs:

1) Use IORegistryExplorer to check what is attaching and loading.

    * The various functions in VoodooRMI will publish debug information which can be useful

    * IORegs can be be saved using `File -> Save As` in the top left

2) Get logs from within macOS

    * If loading VoodooRMI using `kextload` or `kextutil` within macOS, you can use `sudo log show --last boot | grep VRMI`

    * If injecting through OpenCore/Clover, you will want to either use DebugEnhancer.kext or add the boot arg `msgbuf=1048576`. Once in macOS, use `sudo dmesg | grep VRMI` immediately after booting to get the logs.



When creating an issue, you will need to provide log files (IORegs not required but helpful)!