Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/WAGO/aws-iot-greengrass
Docker image for running AWS Greengrass on arm32v7 devices like WAGO PFC200 G2 or Wago Touch Panel
https://github.com/WAGO/aws-iot-greengrass
arm32v7 aws docker greengrass pfc200 touch-panel
Last synced: about 2 months ago
JSON representation
Docker image for running AWS Greengrass on arm32v7 devices like WAGO PFC200 G2 or Wago Touch Panel
- Host: GitHub
- URL: https://github.com/WAGO/aws-iot-greengrass
- Owner: WAGO
- Created: 2018-11-15T13:20:10.000Z (about 6 years ago)
- Default Branch: master
- Last Pushed: 2022-06-13T13:24:37.000Z (over 2 years ago)
- Last Synced: 2024-08-02T21:38:30.999Z (5 months ago)
- Topics: arm32v7, aws, docker, greengrass, pfc200, touch-panel
- Language: Dockerfile
- Homepage:
- Size: 1.74 MB
- Stars: 6
- Watchers: 4
- Forks: 1
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
## Statistics Docker Hub
[](https://hub.docker.com/r/wagoautomation/azure-iot-edge)
[](https://hub.docker.com/r/wagoautomation/azure-iot-edge)
[](https://dev.azure.com/WagoAutomation/aws-iot-greengrass/_build/latest?definitionId=1&branchName=azure-pipelines)
## Statistics Git Hub
[](https://github.com/WAGO/aws-iot-greengrass/issues)
[](https://github.com/WAGO/aws-iot-greengrass/stargazers)
# How to setup AWS IoT Greengrass on a Wago Device
## Prerequisites for tutorial
- Preinstalled SSH Client (e.g. https://www.putty.org/)
- Wago Device e.g. PFC200 G2 or Wago Touch Panel with minimal Firmware 12
- Firmware you can find here: https://github.com/WAGO/pfc-firmware
- Docker IPKG you can find here: https://github.com/WAGO/docker-ipk
- AWS account
## Configure AWS IoT Greengrass on AWS IoT
https://docs.aws.amazon.com/greengrass/latest/developerguide/gg-config.html
> Attention: Skip step 8b of the procedure because AWS IoT Greengrass core and its runtime dependencies are already set up in the docker image.
At the end of all steps you should have downloaded the security resources for the newly created Greengrasscore device.
- -setup.tar.gz
This file will be needed in the later steps.
## WAGO Device Configuration
### Wago Device Login
Start SSH Client e.g. Putty
```bash
login as `root`
password `wago`
```
### Check docker installation
```bash
docker info
```
### Enable symlink and hardlink protection.
* To enable the settings only for the current boot:
``` bash
echo 1 > /proc/sys/fs/protected_hardlinks
echo 1 > /proc/sys/fs/protected_symlinks
```
* To enable the settings to persist across restarts:
``` bash
echo '# AWS Greengrass' >> /etc/sysctl.conf
echo 'fs.protected_hardlinks = 1' >> /etc/sysctl.conf
echo 'fs.protected_symlinks = 1' >> /etc/sysctl.conf
sysctl -p
```
### Create a Greengrass working directory
You can create any working directory for Greengrass. (e.g.)
``` bash
mkdir /home/greengrass
cd /home/greengrass
```
Download the root CA certificate into the Greengrass working directory (for more information see the documentation https://docs.aws.amazon.com/iot/latest/developerguide/managing-device-certs.html).
``` bash
wget -O root.ca.pem https://www.amazontrust.com/repository/AmazonRootCA1.pem
or
wget -O root.ca.pem https://www.symantec.com/content/en/us/enterprise/verisign/roots/VeriSign-Class%203-Public-Primary-Certification-Authority-G5.pem
```
Copy file "-setup.tar.gz" to greengrass working directory on your Wago device. (for this you can use WinSCP or any Ftp client)
Finally decompress file "-setup.tar.gz"
``` bash
tar xvzf guid-setup.tar.gz
```
Afterwards, the working directory should contain following files.
## Running AWS IoT Greengrass Docker Container
``` bash
docker run -it \
--init \
--name aws-iot-greengrass \
-v /home/greengrass/certs:/greengrass/certs \
-v /home/greengrass/config:/greengrass/config \
-p 8883:8883 \
wagoautomation/aws-iot-greengrass
```
The output should look like this example:
```
Setting up greengrass daemon
Validating hardlink/softlink protection
Waiting for up to 30s for Daemon to start
Greengrass successfully started with PID: 10
```
### Persist Greengrass Runtime Logs outside the Greengrass Docker Container
You can run the AWS IoT Greengrass Docker container after bind-mounting the ```/greengrass/ggc/var/log``` directory to persist logs even after the container has exited or is removed.
```
docker run --rm --init -it --name aws-iot-greengrass \
--entrypoint /greengrass-entrypoint.sh \
-v /home/greengrass/certs:/greengrass/certs \
-v /home/greengrass/config:/greengrass/config \
-v /home/greengrass/log:/greengrass/ggc/var/log \
-p 8883:8883 \
wagoautomation/aws-iot-greengrass
```
### Deploy Lambda Functions to the AWS IoT Greengrass Docker Container
You can deploy long-lived Lambda functions to the Greengrass Docker container.
Follow the steps in "Module 3 (Part 1): Lambda Functions on AWS IoT Greengrass" (https://docs.aws.amazon.com/greengrass/latest/developerguide/module3-I.html) to deploy a long-lived Hello-World Lambda function to the container.
## Links
https://docs.aws.amazon.com/de_de/greengrass/latest/developerguide/run-gg-in-docker-container.html