https://github.com/agherzan/pihome

https://github.com/agherzan/pihome

Last synced: 4 months ago
JSON representation

• Host: GitHub
• URL: https://github.com/agherzan/pihome
• Owner: agherzan
• License: gpl-3.0
• Created: 2016-08-17T08:45:05.000Z (almost 10 years ago)
• Default Branch: master
• Last Pushed: 2016-08-15T18:59:54.000Z (almost 10 years ago)
• Last Synced: 2025-03-03T01:17:54.809Z (over 1 year ago)
• Language: BitBake
• Size: 50.8 KB
• Stars: 0
• Watchers: 3
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README
  • License: LICENSE

Awesome Lists containing this project

README

          
This is a metadata repository for a home automation / home security project 

based on meta-raspberrypi layer. The raspberrypi with the waveshare 7inch HDMI

capacitive display is used. For communication the NRF24L01+ modules are used,

making possible to pair the raspberrypi (master) with some ATMega328P 

microcontrollers that have the sensors on GPIO. Communication with the NRF24L01+

modules is done via SPI bus with the RF24/RF24Network/RF24Mesh libraries from

https://tmrh20.github.io/RF24/.

The master node (raspberrypi) can also have some wired sensors attached. The

interface with these sensors is done via GPIO by using the wiringPi library.

The intention is that this project uses some Qt5 interface for linking all the

parts together.

In order to start a fresh build after cloning the repository just invoke the

startBuild.sh script by typing in the command line:

". ./startBuild.sh" or "source ./startBuild.sh"

The script will take the build directory name as a parameter, if not will create

a new one containing the current timestamp one directory above the piHome layer.

For example: rpi-build-yyyy-mm-dd.

The bblayers and local configuration file samples will be copied to the conf

directory for the build new build. The bblayers will be also modified with

the correct paths.

The last step will be to invoke bitbake for the rpi-home-image.

The last two steps will be executed if there is no build directory specified. In

the other case no configuration file will be copied, nor the bitbake command on

the rpi-home-image will be executed. Script considers the user wants to initialize

the build environment in an older build directory and no further configuration will

be done.