Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/akeb/dragonrelay

Last synced: about 1 month ago
JSON representation

Host: GitHub
URL: https://github.com/akeb/dragonrelay
Owner: AKEB
Created: 2023-09-27T08:16:33.000Z (about 1 year ago)
Default Branch: main
Last Pushed: 2023-10-26T14:24:15.000Z (about 1 year ago)
Last Synced: 2023-10-26T15:41:10.497Z (about 1 year ago)
Size: 1.94 MB
Stars: 0
Watchers: 1
Forks: 0
Open Issues: 0
Metadata Files:
- Readme: README.md

Awesome Lists containing this project

README

# Dragon Relay

![IMG_1.jpg](IMG_1.jpg)
![IMG_2.jpg](IMG_2.jpg)

## USB to Serial Connect

```text
Красный провод: 5 В
Черный провод: GND
Белый провод: RXD
Зеленый провод: TXD
Желтый провод: RTS
Синий провод: CTS
```

При прошивке, когда в консоле будет написано Connecting... нужно нажать btn2 примерно на секунду и отпустить. Если не нанет прошивать, повторить нажатие.

## PINS GPIO

```text
13 - 1 Relay
12 - 2 Relay

2 - Button 1
0 - Button 2

14 - DHT
16 - Red led (USB Status)
```

## Tasmota

Go to the web Installer and follow the instructions [https://tasmota.github.io/install/](https://tasmota.github.io/install/)

After connecting to your Wi-Fi network, make the following settings

1. Перейдите к настройкам шаблона и создайте шаблон DragonRelay на основе Generic

- GPIO0 - Кнопка 2
- GPIO2 - Кнопка 1
- GPIO12 - Реле 2
- GPIO13 - Реле 1
- GPIO14 - AM2301 (Или ваш датчик DHT)
- GPIO16 - LedLink

![IMG_3.png](IMG_3.png)

2. В разделе прочии настройки указываем имя устройства и выключателей

![IMG_4.png](IMG_4.png)

3. В настройках MQTT указываем свои настройки

![IMG_5.png](IMG_5.png)

## ESPEasy

### Install 1M

First install Python and esptool.py

```bash
pip install esptool
```

```bash
esptool.py \
--chip esp8266 \
--baud 115200 \
--port /dev/cu.usbserial-A601NK9P \
write_flash -fs 1MB 0x00000 \
./blank_1MB.bin

esptool.py \
--chip esp8266 \
--baud 115200 \
--port /dev/cu.usbserial-A601NK9P \
write_flash -fs 1MB 0x00000 \
./ESP_Easy_mega_20230822_normal_ESP8266_1M.bin
```

### Install 4M1M

```bash
esptool.py \
--chip esp8266 \
--baud 115200 \
--port /dev/cu.usbserial-A601NK9P \
write_flash -fs 4MB 0x00000 \
./blank_4MB.bin

esptool.py \
--chip esp8266 \
--baud 115200 \
--port /dev/cu.usbserial-A601NK9P \
write_flash -fs 4MB 0x00000 \
./ESP_Easy_mega_20230822_normal_ESP8266_4M1M.bin
```

### First Connect

```text
http://192.168.4.1/
wifi password: configesp
```

### Use

[http://192.168.1.20/control?cmd=GPIO,12,1](http://192.168.1.20/control?cmd=GPIO,12,1)

[http://192.168.1.20/control?cmd=GPIO,13,1](http://192.168.1.20/control?cmd=GPIO,13,1)

[http://192.168.1.20/control?cmd=GPIO,12,0](http://192.168.1.20/control?cmd=GPIO,12,0)

[http://192.168.1.20/control?cmd=GPIO,13,0](http://192.168.1.20/control?cmd=GPIO,13,0)

[http://192.168.1.20/control?cmd=Status,GPIO,12](http://192.168.1.20/control?cmd=Status,GPIO,12)

[http://192.168.1.20/control?cmd=Status,GPIO,13](http://192.168.1.20/control?cmd=Status,GPIO,13)

### Documentation

[https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference](https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference)

### Settings

#### Tools -> Advanced Settings

- Rules: True
- Enable Rules Cache: True
- Use NTP: True
- NTP Hostname: ntp0.ntp-servers.net
- Timezone Offset: 180
- JSON bool output without quotes: True

#### Rules

```text
//Изменение состояния реле 1 переключателем 1
on Button1#State do
If [Button1#State]=1
if [Relay1#State]=0
gpio,13,1
Else
gpio,13,0
Endif
Endif
endon

//Изменение состояния реле 2 переключателем 2
on Button2#State do
If [Button2#State]=1
if [Relay2#State]=0
gpio,12,1
Else
gpio,12,0
Endif
Endif
endon
```

#### Controllers

- Protocol: Home Assistant (openHAB) MQTT
- Locate Controller: {MQTT_HOST}
- Controller Port: {MQTT_PORT}
- Use Extended Credentials: True
- Controller User: {MQTT_USER}
- Controller Password: {MQTT_PASSWORD}
- Publish Retain Flag: True
- Enabled: True

#### Devices

- DHT11/12/22 SONOFF2301/7021/MS01
- Name: DHT
- Enabled: True
- GPIO: GPIO-14 (D5)
- Sensor model: DHT 22 (Or is yours some kind of)
- Single event with all values: True
- Send to Controller: True
- Interval: 10
- Values
- Temperature
- Name: Temperature
- Decimals: 2
- Humidity
- Name: Humidity
- Decimals: 2
- Formula (if need) example: %value%-1.9 or %value%+14.2 (For correction)
- Switch input - Switch
- Enabled: True
- Name: Relay1
- GPIO: GPIO-13 (D7)
- Switch Type: Switch
- Switch Button Type: Normal Switch
- Send Boot state: True
- Single event with all values: True
- Send to Controller: True
- Values
- State
- Switch input - Switch
- Enabled: True
- Name: Relay2
- GPIO: GPIO-12 (D6)
- Switch Type: Switch
- Switch Button Type: Normal Switch
- Send Boot state: True
- Single event with all values: True
- Send to Controller: True
- Values
- State
- Switch input - Switch
- Enabled: True
- Name: Button1
- Internal PullUp: True
- Inversed Logic: True
- GPIO: GPIO-2 (D4)
- Switch Type: Switch
- Switch Button Type: Normal Switch
- Send Boot state: True
- Values
- State
- Switch input - Switch
- Enabled: True
- Name: Button2
- Internal PullUp: False
- Inversed Logic: True
- GPIO: GPIO-0 (D3)
- Switch Type: Switch
- Switch Button Type: Normal Switch
- Send Boot state: True
- Values
- State