https://github.com/artemisart/water-meter
https://github.com/artemisart/water-meter
Last synced: 3 months ago
JSON representation
- Host: GitHub
- URL: https://github.com/artemisart/water-meter
- Owner: artemisart
- License: agpl-3.0
- Created: 2020-06-08T19:27:32.000Z (about 5 years ago)
- Default Branch: master
- Last Pushed: 2024-05-16T01:30:27.000Z (about 1 year ago)
- Last Synced: 2025-01-19T10:28:41.767Z (5 months ago)
- Language: Python
- Size: 53.7 KB
- Stars: 0
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# water-meter
## Installation
### Raspberry-pi
```sh
# one time
python -m venv .venv
# uv
curl -LsSf https://astral.sh/uv/install.sh | sh
. .venv/bin/activate.fish
uv pip install litestar uvicorn
```
### Raspberry-pi - Arduino ethernet connection
To directly connect the Arduino to the RPi, **add to crontab** (`crontab -e`):
```bash
@reboot sudo ip address add 10.0.0.1/24 dev eth0
```
This sets the RPi IP to 10.0.0.1. Arduino is set to 10.0.0.2. Test the connection with `ping 10.0.0.2`.
### Setup GUI: open browser on boot
To start midori automatically we can use LXDE settings, write the following to `~/.config/lxsession/LXDE-pi/autostart`:
```
@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
#@xscreensaver -no-splash
point-rpi
@cd ~water-meter/back && ../.venv/bin/litestar run --host 0.0.0.0
#@midori -e Fullscreen http://localhost:8086/
@chromium-browser --start-fullscreen http://localhost:8086/
```