https://github.com/asmuelle/heekscnc
Automatically exported from code.google.com/p/heekscnc
https://github.com/asmuelle/heekscnc
Last synced: about 1 month ago
JSON representation
Automatically exported from code.google.com/p/heekscnc
- Host: GitHub
- URL: https://github.com/asmuelle/heekscnc
- Owner: asmuelle
- License: other
- Created: 2015-03-16T08:07:33.000Z (over 11 years ago)
- Default Branch: master
- Last Pushed: 2015-03-16T08:15:25.000Z (over 11 years ago)
- Last Synced: 2023-03-11T04:46:02.565Z (over 3 years ago)
- Language: C++
- Size: 19.5 MB
- Stars: 0
- Watchers: 1
- Forks: 0
- Open Issues: 40
-
Metadata Files:
- Readme: README.Unix
- License: COPYING
Awesome Lists containing this project
README
HeeksCNC
========
This file describes how to build and install HeeksCNC under Unix systems.
0. Requirements
---------------
To build HeeksCNC, you need to install these requirements (with develoment files)
* HeeksCAD
* OpenCASCADE or OCE (OpenCASCADE Community Edition)
* wxWidgets 2.8
1. Preparation
--------------
Create a build directory (e.g. build/ in sources root directory):
mkdir build
cd build
2. Configure build
------------------
If you want a default prefix (/usr/local) and a "Release" type, simply run:
cmake ..
If you want to change install prefix (e.g. /usr):
cmake -DCMAKE_INSTALL_PREFIX=/usr ..
If you want to debug HeeksCNC and its install:
cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_PREFIX=$PWD/install ..
Important note: HeeksCNC's prefix should be the same as HeeksCAD to work correctly
3. Build
--------
After a successful CMake configuration, you can build using:
make
If you want more output (ie. to debug):
make VERBOSE=1
4. Install
----------
Using default or system-wide prefix:
sudo make install
Please note that if you installed it in /usr/local, you may need to run:
sudo ldconfig
If you choose a user-writable prefix, superuser privileges are not needed:
make install
5. Run
------
HeeksCNC is used through HeeksCAD interface.
HeeksCNC requires additional python modules at runtime:
- python module built by libarea
- python module built by opencamlib
X. One-liner snippets
---------------------
Default:
mkdir build && cd build && cmake .. && make
Debug:
mkdir debug && cd debug && cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_PREFIX=$PWD/install .. && make && make install
LD_LIBRARY_PATH=install/lib install/bin/heekscad