https://github.com/basilfx/knx-universal-taster

DIY universal taster actor for the KNX bus.
https://github.com/basilfx/knx-universal-taster

embedded ets5 knx

Last synced: 19 days ago
JSON representation

DIY universal taster actor for the KNX bus.

• Host: GitHub
• URL: https://github.com/basilfx/knx-universal-taster
• Owner: basilfx
• License: other
• Created: 2018-08-13T21:19:00.000Z (over 6 years ago)
• Default Branch: master
• Last Pushed: 2025-01-06T22:27:18.000Z (26 days ago)
• Last Synced: 2025-01-06T23:30:45.702Z (26 days ago)
• Topics: embedded, ets5, knx
• Language: HTML
• Homepage:
• Size: 11.6 MB
• Stars: 17
• Watchers: 7
• Forks: 5
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE.md

Awesome Lists containing this project

README

        
# KNX Universal Taster

DIY universal taster interface for the KNX bus.

## Introduction

This repository contains my designs for creating a custom KNX universal taster

interface (or actor). This is board that can be used for several purposes, but

its main purpose is to convert pulse-based wall switches into KNX-enabled

switches. The boards are designed to be small and should fit wall boxes with a

depth of 50 mm.

[](pcb/Universal-Taster/Pictures/Image4.jpg)

[](pcb/Universal-Taster/Pictures/Image5.jpg)

[](pcb/Universal-Taster/Pictures/Image6.jpg)

I currently have 25 boards installed in my house. As of writing (January 2021),

they have been running for more than two years.

## Features

While commercial alternatives exists, for example the [MDT Universal Interface](https://www.mdt.de/EN_Universal_Interface.html)

or the [ABB Universal Interface](https://new.abb.com/products/GHQ6310070R0111/us-u4-2-universal-interface-4-fold-fm),

I challenged myself to create a version that has more capabilities:

* Smaller.

* Programmable button options, e.g. multiple presses, long(er) presses.

* Support for (environmental) sensors.

* Universal use: data loggers, protocol gateways (Modbus, DSMR).

* Remote configuration via ETS or other software.

## Contents

You can find the following in this repository:

* [3D prints](3d) - Printable parts, such as an enclosure

* [Firmware](firmware) - Firmware files

* [PCB designs](pcb) - KiCad designs for the main PCB and extensions

## Support

You can buy the boards from [Aisler.net](https://aisler.net/p/GGKCSYBF), and

help me to support the development.

## License

The work in this repository is covered by CC BY-NC-SA 4.0. See the `LICENSE.md`

file for more information.

## Disclaimer

Use this project or information at your own risk. I cannot be held responsible

for any injuries or damages.

This page and its content is not affiliated with the KNX Association. Most

certainly, this work is not certified by the KNX Association.