https://github.com/basilfx/sensor-community-enclosure

3D printed version of a Sensor.Community Air Sensor enclosure.
https://github.com/basilfx/sensor-community-enclosure

3d-printing air-quality esp8266 luftdaten luftdaten-sensor sensor-community

Last synced: 2 days ago
JSON representation

3D printed version of a Sensor.Community Air Sensor enclosure.

• Host: GitHub
• URL: https://github.com/basilfx/sensor-community-enclosure
• Owner: basilfx
• License: other
• Created: 2021-12-15T20:50:37.000Z (almost 3 years ago)
• Default Branch: master
• Last Pushed: 2022-03-15T20:45:59.000Z (over 2 years ago)
• Last Synced: 2024-01-30T14:15:35.184Z (10 months ago)
• Topics: 3d-printing, air-quality, esp8266, luftdaten, luftdaten-sensor, sensor-community
• Homepage:
• Size: 32 MB
• Stars: 2
• Watchers: 3
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE.md

Awesome Lists containing this project

README

        
# Sensor Community Enclosure

3D printed version of a Sensor.Community Air Sensor enclosure.

## Introduction

This repository contains the parts and assembly instructions for creating my

version of the [Sensor.Community](https://sensor.community/en/sensors/airrohr/)

Air Sensor. This sensor uses a relativly cheap PM2.5/PM10 sensor, to measure

the air quality. This data is then shared with

[Sensor.Community](https://maps.sensor.community/) and other instances, to

keep track of the (local) air quality.

[](images/Enclosure.jpg)

[](images/Outtake%20Holes.jpg)

[](images/Tube%Bracked%Installed.jpg)

[](images/Inside%20Enclosure.jpg)

## Features

* 3D printed parts (for the specific enclosure I used, +/- 80x120 mm)

* Rigid mounting with additional weatherproofing

* Air quality, temperature and GPS (location and altitude)

## Contents

* The `3d/` folder contains a 3D-printable designs for the necessary parts.

* The `firmware/` folder contains a compiled version of the Airrohr firmware I

  used (added for archiving reasons).

* The `images/` folder contains several pictures of the assembled sensor.

## Instructions

Printing, assembly and flashing instructions can be found in

[Instructions.md](Instructions.md).

## License

The work in this repository is covered by CC BY-NC-SA 4.0. See the `LICENSE.md`

file for more information.

Some parts of this project are covered by a different license.