https://github.com/bcn3d/configurations

Settings for the slicing softwares tested by BCN3D for the BCN3D+, Paste Extruder and the Dual Extruder
https://github.com/bcn3d/configurations

Last synced: 6 days ago
JSON representation

Settings for the slicing softwares tested by BCN3D for the BCN3D+, Paste Extruder and the Dual Extruder

• Host: GitHub
• URL: https://github.com/bcn3d/configurations
• Owner: BCN3D
• Created: 2013-11-15T09:30:52.000Z (almost 11 years ago)
• Default Branch: master
• Last Pushed: 2016-02-16T18:37:33.000Z (over 8 years ago)
• Last Synced: 2023-08-05T21:23:34.107Z (over 1 year ago)
• Homepage:
• Size: 323 KB
• Stars: 8
• Watchers: 6
• Forks: 10
• Open Issues: 2
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
BCN3D Printing Configurations

---------------------------------

Based on our experience in 3D Printing, we've made some base configurations in order to make it easier to print good quality objects from day one.

You will find separated configurations for the single extruder and the dual extruder option as well as different materials. The corresponding files are organized as follows:

1. Configurations

    1. Single Extruder

        + Slic3r

            + ABS

            + PLA

            + Nylon

            + Filaflex

        + Cura

            + Filaflex

    2. Dual Extruder

        + Slic3r

            + ABS

            + PLA

        + Cura

            + ABS

            + PLA

        + Calibration

---

>Pay attention to the name of the configuration file! 

>It contains the material, the initials and the version. `Configuraciones.txt` contains explanation for every config.

---

###Contact

If you have any questions about the configurations you can contact us via:

* [Forum](http://bcn3dtechnologies.com/es/forum)

* [SAT email](mailto:"[email protected]") 

* Leaving an issue or pull request on Github