Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/brentseidel/pi-mainframe

Simulated mainframe computer based on a Raspberry Pi
https://github.com/brentseidel/pi-mainframe

ada hardware kicad-schematics latex-document raspberry-pi

Last synced: 3 months ago
JSON representation

Simulated mainframe computer based on a Raspberry Pi

Awesome Lists containing this project

README 

        
# Pi-Mainframe

Simulated mainframe computer based on a Raspberry Pi



[![Alire](https://img.shields.io/endpoint?url=https://alire.ada.dev/badges/blinkenlights.json)]

(https://alire.ada.dev/crates/blinkenlights.html)



When I was a young lad, computers had complicated panels filled with

switches and lights.  Sadly, these disappeared as I got older.



This project is an attempt to recreate the feel of old mainframe computers

using a Raspberry Pi 3 and some other assorted parts that I had laying

around.  The actual boxes and panels are 3D printed.



Here is an example system.  Note that it is fairly modular and the

modules can be attached in different ways.

![System Front](./Pict/System-Front.JPG)



Back of system

![System Back](./Pict/System-Rear.JPG)



## Note

This is still very much a work in progress and things will change.



This project requires 3D printing, making PCBs, soldering, and building

software from source.  It might be a good project for an undergraduate

engineering program.



## Power

I originally used a random micro USB power supply for the Pi 3 that is

running the simulation.  It would complain about low voltage and

occasionally reboot.  I just replaced it with the official Raspberry Pi

power supply and it is not complaining about low voltage.  Time will

tell if it is more stable.



Ultimately, there will be limits to how much power you can get out of

the Raspberry Pi.  There are ways to reduce the power needed.  The first

thing that I would try would be to increase the value of the resistors

for the LEDs.  This would also reduce the brightness so you may wish to

do this as well, if the LEDs are too bright.  A little experimentation

will be needed to determine the proper value.  From a BOM viewpoint,

using the same resistors for both the switches and LEDs would be a win.



## PCBs

Three printed circuit boards have been designed to eliminate some of the

tedious soldering.  Using the PCBs make assembly much easier and the

resulting project much less of a mess of wires.



### IO Board PCB

The I/O board PCB has been created and tested.  The schematics and PCB

layout have been moved to the Circuits reporitory.  Documentation and

assembly instructions for it have been created there.



### Breakout PCB

A breakout PCB has been developed for breaking out the 10 conductor

ribbon cables that are being used for the I2C bus, and other uses.  It

is also in the Circuits repository.



### LED PCB

A PCB has been developed for holding the LEDs.  This required some redesign

to the panels.  However it eliminates the soldering of wires directly to

the LED leads.  The LED PCB can also be fairly easily added to and

removed from panels should you wish to, for example, use LEDs of different

colors.



## Dependencies

This depends on the following repositories:

* https://github.com/BrentSeidel/BBS-Ada.git

* https://github.com/BrentSeidel/BBS-BBB-Ada.git

* https://github.com/BrentSeidel/Ada-Web-Server.git

* https://github.com/BrentSeidel/Things.git

* https://github.com/BrentSeidel/Sim-CPU.git

* https://github.com/BrentSeidel/Circuits.git



If you are actually interested in simulating old computers, you can

download and build simh from github at https://github.com/simh/simh.git

I was able to get the PDP-11 sim to build (I haven't tried others) and

run on a Raspberry Pi.  As far as I know, it has no support for blinking

lights.



You could, of course run simh in parallel with this project giving a

CPU simulation as well as lights and switches.  Unfortunately, they would

be completely independant.  Someday, perhaps this will change.



## Assembly

This project will require quite a bit of 3D printing and soldering.  The

included documentation includes a parts list.  Read the documentation

first, then download the dependencies repositories.  Finally decided

how big of a system you want.

1. Slice the 3D models and start them printing.  This will take a while,

   so start this first and then work on other things while they are printing.

2. Install Raspberian on the Raspberry Pi and install the following packages:

   * avahi - This allows discovery on your local network

   * gnat - The GNU Ada distribution

   * gprbuild - Used for building Ada software

3. Build the software.  If there are errors about missing "obj" directories,

   create the directories.

4. Start soldering the various boards and cables.

5. As panels come off the printer, install LEDs and switches as appropriate

6. As the trays come off the printer, install the boards and connectors.

7. Once everything is printed, put all the pieces together.