https://github.com/bwesterb/klikaanklikuit-homekit

KlikaanKlikuit switches – HomeKit bridge using an Arduino
https://github.com/bwesterb/klikaanklikuit-homekit

433mhz arduino bridge homekit klikaanklikuit

Last synced: 6 months ago
JSON representation

KlikaanKlikuit switches – HomeKit bridge using an Arduino

• Host: GitHub
• URL: https://github.com/bwesterb/klikaanklikuit-homekit
• Owner: bwesterb
• License: gpl-3.0
• Created: 2017-06-10T22:26:11.000Z (about 9 years ago)
• Default Branch: master
• Last Pushed: 2024-07-29T09:05:40.000Z (almost 2 years ago)
• Last Synced: 2024-07-29T12:18:13.857Z (almost 2 years ago)
• Topics: 433mhz, arduino, bridge, homekit, klikaanklikuit
• Language: Go
• Size: 33.2 KB
• Stars: 3
• Watchers: 4
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

          
KlikaanKlikuit-HomeKit bridge

-----------------------------

Connects KlikaanKlikuit RF switches to homekit using a server

connected to an arduino connected to a 433.92Mhz transmitter.

[Demo video](https://www.youtube.com/watch?v=mdhz_0Kp_ns)

How to:

 1. Load arduino.ino on the Arduino Uno.

 2. Connect the 433.92Mhz transmitter data line to the arduino on pin 8

    (I use the cheap fs1000a RF-transmitter.)

 3. Install go on the server.

 4. Run `go get github.com/bwesterb/klikaanklikuit-homekit`

 5. Figure out the hardware ID of the KlikaanKlikuit devices.  This is easy

    with [rtl_433](https://github.com/merbanan/rtl_433) if

    you have (a friend with a) software-defined radio receiver.

 6. Run the bridge: `$GOPATH/bin/klikaanklikuit-homekit -serial /dev/ttyDevOfArduino -pin 00102003 -hwid 123123`