Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/championswimmer/simavr


https://github.com/championswimmer/simavr

Last synced: about 1 month ago
JSON representation

Awesome Lists containing this project

README 

        
simavr - a lean and mean Atmel AVR simulator for linux

======



_simavr_ is a new AVR simulator for linux, or any platform that uses avr-gcc. It uses 

avr-gcc's own register definition to simplify creating new targets for supported AVR

devices. The core was made to be small and compact, and hackable so allow quick 

prototyping of an AVR project. The AVR core is now stable for use with parts 

with <= 128KB flash, and with preliminary support for the bigger parts. The 

simulator loads ELF files directly, and there is even a way to specify simulation 

parameters directly in the emulated code using an .elf section. You can also 

load multipart HEX files.



Supported IOs

--------------

* _eeprom_

* _watchdog_

* _IO ports_ (including pin interrupts)

* _Timers_, 8 &16 (Normal, CTC and Fast PWM, the overflow interrupt too)

* The _UART_, including tx & rx interrupts (there is a loopback/local echo test mode too)

* _SPI_, master/slave including the interrupt

* _i2c_ Master & Slave

* External _Interrupts_, INT0 and so on.

* _ADC_

* Self-programming (ie bootloaders!)



Emulated Cores (very easy to add new ones!)

--------------

+ AT90USB162 (with USB!)

+ ATMega1280

+ ATMega128

+ ATMega16M1

+ ATMega164/324/644

+ ATMega48/88/168/328

+ ATMega8

+ ATTiny25/45/85

+ ATTIny44/84

+ ATTiny2313

+ ATTiny13



Extras:

-------

* fully working _gdb_ support including some pretty cool “passive modes”.

* There is also very easy support for “VCD” (Value Change Dump) that can be visualized 

graphically as “waveforms” with tools like _gtkwave_ (see below).

* There are a few examples of real life firmwares running on simavr, including OpenGL rendering of the display…

* There is support for _Arduino_, but no IDE integration



Documentation And Further Information

-------------------------------------



* Manual / Developer Guide: https://github.com/buserror-uk/simavr/blob/master/doc/manual/manual.pdf?raw=true

* Examples: https://github.com/buserror-uk/simavr/tree/master/examples

* Mailing List: http://groups.google.com/group/simavr

* IRC: _#simavr_ on Freenode



Contributing

------------



Patches are always welcome! Please submit your changes via Github pull requests.



VCD Support -- built in logic analyzer 

-----------

_simavr_ can output most of its pins, firmware variables, interrupts and a few other

things as signals to be dumped into a file that can be plotted using gtkwave for

further, precise analysis.

A firmware can contain instructions for _simavr_ to know what to trace, and the file is

automatically generated.

Example:



	const struct avr_mmcu_vcd_trace_t _mytrace[]  _MMCU_ = {

		{ AVR_MCU_VCD_SYMBOL("UDR0"), .what = (void*)&UDR0, },

		{ AVR_MCU_VCD_SYMBOL("UDRE0"), .mask = (1 << UDRE0), .what = (void*)&UCSR0A, },

	};



Will tell _simavr_ to generate a trace everytime the UDR0 register changes and everytime

the interrupt is raised (in UCSR0A). The *_MMCU_* tag tells gcc that it needs compiling,

but it won't be linked in your program, so it takes literally zero bytes, this is a code

section that is private to _simavr_, it's free!

A program running with these instructions and writing to the serial port will generate

a file that will display:



	$ ./simavr/run_avr tests/atmega88_example.axf

	AVR_MMCU_TAG_VCD_TRACE 00c6:00 - UDR0

	AVR_MMCU_TAG_VCD_TRACE 00c0:20 - UDRE0

	Loaded 1780 .text

	Loaded 114 .data

	Loaded 4 .eeprom

	Starting atmega88 - flashend 1fff ramend 04ff e2end 01ff

	atmega88 init

	avr_eeprom_ioctl: AVR_IOCTL_EEPROM_SET Loaded 4 at offset 0

	Creating VCD trace file 'gtkwave_trace.vcd'

	Read from eeprom 0xdeadbeef -- should be 0xdeadbeef..

	Read from eeprom 0xcafef00d -- should be 0xcafef00d..

	simavr: sleeping with interrupts off, quitting gracefully



And when the file is loaded in gtkwave, you see:

![gtkwave](https://github.com/buserror-uk/simavr/raw/master/doc/img/gtkwave1.png)



You get a very precise timing breakdown of any change that you add to the trace, down

to the AVR cycle. 



Example:

--------

_simavr_ is really made to be the center for emulating your own AVR projects, not just

a debugger, but also the emulating the peripherals you will use in your firmware, so 

you can test and develop offline, and now and then try it on the hardware.



You can also use _simavr_ to do test units on your shipping firmware to validate it

before you ship a new version, to prevent regressions or mistakes.



_simavr_ has a few 'complete projects/ that demonstrate this, most of them were made

using real hardware at some point, and the firmware binary is _exactly_ the one that

ran on the hardware. The key here is to emulate the _parts_ or peripherals that

are hooked to the AVR. Of course, you don't have to emulate the full hardware, you just

need to generate the proper stimulus so that the AVR is fooled.



HD44780 LCD Board Demo

----------------------



![lcd](https://github.com/buserror-uk/simavr/raw/master/doc/img/hd44780.png)



This example board hooks up an Atmega48 to an emulated HD44780 LCD and display a running

counter in the 'lcd'. Everything is emulated, the firmware runs exactly like this

on a real hardware.



![lcd-gtkwave](https://github.com/buserror-uk/simavr/raw/master/doc/img/hd44780-wave.png)



And this is a gtkwave trace of what the firmware is doing. You can zoom in, measure, etc

in gtkwave, select trades to see etc.



Quite a few other examples are available!