Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/coapjs/node-coap
CoAP - Node.js style
https://github.com/coapjs/node-coap
Last synced: 3 months ago
JSON representation
CoAP - Node.js style
- Host: GitHub
- URL: https://github.com/coapjs/node-coap
- Owner: coapjs
- License: mit
- Created: 2013-06-05T14:12:39.000Z (over 11 years ago)
- Default Branch: master
- Last Pushed: 2024-04-21T20:53:24.000Z (7 months ago)
- Last Synced: 2024-05-22T08:01:45.830Z (6 months ago)
- Language: TypeScript
- Homepage:
- Size: 876 KB
- Stars: 519
- Watchers: 36
- Forks: 154
- Open Issues: 24
-
Metadata Files:
- Readme: README.md
- Contributing: CONTRIBUTING.md
- Funding: .github/FUNDING.yml
- License: LICENSE.md
Awesome Lists containing this project
- awesome-CoAP - node-coap - node-coap is a client and server library for CoAP modeled after the http module. (Libraries / Node)
README
node-coap
=====
[](https://coveralls.io/github/mcollina/node-coap?branch=master)
[](https://gitter.im/mcollina/node-coap)
__node-coap__ is a client and server library for CoAP modeled after the `http` module.
* Introduction
* Installation
* Basic Example
* Proxy features
* API
* Contributing
* License & copyright
[](https://nodei.co/npm/coap/)
[](https://nodei.co/npm/coap/)
What is CoAP?
> Constrained Application Protocol (CoAP) is a software protocol
intended to be used in very simple electronics devices that allows them
to communicate interactively over the Internet. - Wikipedia
This library follows:
* [RFC 7252](https://datatracker.ietf.org/doc/html/rfc7252) for CoAP,
* [RFC 7641](https://datatracker.ietf.org/doc/html/rfc7641)
for the observe specification,
* [RFC 7959](https://datatracker.ietf.org/doc/html/rfc7959) for
the blockwise specification,
* [RFC 8132](https://datatracker.ietf.org/doc/html/rfc8132) for the PATCH, FETCH, and iPATCH methods.
It does not parse the protocol but it use
[CoAP-packet](http://github.com/mcollina/coap-packet) instead.
If you need a command line interface for CoAP, check out
[coap-cli](http://github.com/mcollina/coap-cli).
**node-coap** is an **OPEN Open Source Project**, see the Contributing section to find out what this means.
The library is tested with LTS versions (currently 12, 14, 16 and 18).
```
$ npm install coap --save
```
The following example opens a UDP server and sends a
CoAP message to it:
```js
const coap = require('coap')
const server = coap.createServer()
server.on('request', (req, res) => {
res.end('Hello ' + req.url.split('/')[1] + '\n')
})
// the default CoAP port is 5683
server.listen(() => {
const req = coap.request('coap://localhost/Matteo')
req.on('response', (res) => {
res.pipe(process.stdout)
res.on('end', () => {
process.exit(0)
})
})
req.end()
})
```
or on IPv6:
```js
const coap = require('coap')
const server = coap.createServer({ type: 'udp6' })
server.on('request', (req, res) => {
res.end('Hello ' + req.url.split('/')[1] + '\n')
})
// the default CoAP port is 5683
server.listen(() => {
const req = coap.request('coap://[::1]/Matteo')
req.on('response', (res) => {
res.pipe(process.stdout)
res.on('end', () => {
process.exit(0)
})
})
req.end()
})
```
## Proxy features
The library now comes with the ability to behave as a COAP proxy for other COAP endpoints. In order to activate the
proxy features, create the server with the `proxy` option activated.
A proxy-enabled service behaves as usual for all requests, except for those coming with the `Proxy-Uri` option. This
requests will be redirected to the URL specified in the option, and the response from this option will, in turn, be
redirected to the caller. In this case, the proxy server handler is not called at all (redirection is automatic).
You can find an example of how this mechanism works in `examples/proxy.js`. This example features one target server
that writes all the information it receives along with the origin port and a proxy server. Once the servers are up:
- Ten requests are sent directly to the server (without reusing ports)
- Ten requests are sent through the proxy (without reusing ports)
The example shows that the target server sees the last ten requests as coming from the same port (the proxy), while the
first ten come from different ports.
* coap.request()
* coap.createServer()
* IncomingMessage
* OutgoingMessage
* ObserveReadStream
* ObserveWriteStream
* coap.registerOption()
* coap.ignoreOption()
* coap.registerFormat()
* coap.Agent
* coap.globalAgent
* coap.globalAgentIPv6
* coap.updateTiming
* coap.defaultTiming
-------------------------------------------------------
### request(requestParams)
Execute a CoAP request. `requestParams` can be a string or an object.
If it is a string, it is parsed using `new URL(requestParams)`.
If it is an object:
- `host`: A domain name or IP address of the server to issue the request
to.
Defaults to `'localhost'`.
- `hostname`: To support `URL` `hostname` is preferred over
`host`
- `port`: Port of remote server. Defaults to 5683.
- `method`: A string specifying the CoAP request method. Defaults to
`'GET'`.
- `confirmable`: send a CoAP confirmable message (CON), defaults to
`true`.
- `observe`: send a CoAP observe message, allowing the streaming of
updates from the server.
- `pathname`: Request path. Defaults to `'/'`. Should not include query string
- `query`: Query string. Defaults to `''`. Should not include the path,
e.g. 'a=b&c=d'
- `options`: object that includes the CoAP options, for each key-value
pair the [setOption()](#setOption) will be called.
- `headers`: alias for `options`, but it works only if `options` is
missing.
- `agent`: Controls [`Agent`](#agent) behavior. Possible values:
* `undefined` (default): use [`globalAgent`](#globalAgent), a single socket for all
concurrent requests.
* [`Agent`](#agent) object: explicitly use the passed in [`Agent`](#agent).
* `false`: opts out of socket reuse with an [`Agent`](#agent), each request uses a
new UDP socket.
- `proxyUri`: adds the Proxy-Uri option to the request, so if the request is sent to a
proxy (or a server with proxy features) the request will be forwarded to the selected URI.
The expected value is the URI of the target. E.g.: 'coap://192.168.5.13:6793'
- `multicast`: If set to `true`, it forces request to be multicast. Several `response` events
will be emitted for each received response. It's user's responsibility to set proper multicast `host` parameter
in request configuration. Default `false`.
- `multicastTimeout`: time to wait for multicast reponses in milliseconds. It is only applicable in case if `multicast` is `true`. Default `20000 ms`.
- `retrySend`: overwrite the default maxRetransmit, useful when you want to use a custom retry count for a request
`coap.request()` returns an instance of OutgoingMessage.
If you need
to add a payload, just `pipe` into it.
Otherwise, you __must__ call `end` to submit the request.
If `hostname` is a IPv6 address then the payload is sent through a
IPv6 UDP socket, dubbed in node.js as `'udp6'`.
#### Event: 'response'
`function (response) { }`
Emitted when a response is received.
`response` is
an instance of IncomingMessage.
If the `observe` flag is specified, the `'response'` event
will return an instance of
ObserveReadStream.
Which represent the updates coming from the server, according to the
[observe spec](http://tools.ietf.org/html/draft-ietf-core-observe-11).
-------------------------------------------------------
### createServer([options], [requestListener])
Returns a new CoAP Server object.
The `requestListener` is a function which is automatically
added to the `'request'` event.
The constructor can be given an optional options object, containing one of the following options:
* `type`: indicates if the server should create IPv4 connections (`udp4`) or IPv6 connections (`udp6`). Defaults
to `udp4`.
* `proxy`: indicates that the server should behave like a proxy for incoming requests containing the `Proxy-Uri` header.
An example of how the proxy feature works, refer to the example in the `/examples` folder. Defaults to `false`.
* `multicastAddress`: Optional. Use this in order to force server to listen on multicast address
* `multicastInterface`: Optional. Use this in order to force server to listen on multicast interface. This is only applicable
if `multicastAddress` is set. If absent, server will try to listen `multicastAddress` on all available interfaces
* `piggybackReplyMs`: set the number of milliseconds to wait for a
piggyback response. Default 50.
* `sendAcksForNonConfirmablePackets`: Optional. Use this to suppress sending ACK messages for non-confirmable packages
* `clientIdentifier`: Optional. If specified, it should be a callback function with a signature like `clientIdentifier(request)`, where request is an `IncomingMessage`. The function should return a string that the caches can assume will uniquely identify the client.
* `reuseAddr`: Optional. Use this to specify whether it should be possible to have multiple server instances listening to the same port. Default `true`.
#### Event: 'request'
`function (request, response) { }`
Emitted each time there is a request.
`request` is an instance of IncomingMessage and `response` is
an instance of OutgoingMessage.
If the `observe` flag is specified, the `response` variable
will return an instance of ObserveWriteStream.
Each `write(data)` to the stream will cause a new observe message sent
to the client.
#### server.listen(port, [address], [callback])
Begin accepting connections on the specified port and hostname. If the
hostname is omitted, the server will accept connections directed to any
IPv4 or IPv6 address by passing `null` as the address to the underlining socket.
To listen
to a unix socket, supply a filename instead of port and hostname.
A custom socket object can be passed as a `port` parameter. This custom socket
must be an instance of `EventEmitter` which emits `message`, `error` and
`close` events and implements `send(msg, offset, length, port, address, callback)`
function, just like `dgram.Socket`.
In such case, the custom socket must be pre-configured manually, i.e. CoAP server
will not bind, add multicast groups or do any other configuration.
This function is asynchronous.
#### server.close([callback])
Closes the server.
This function is synchronous, but it provides an asynchronous callback
for convenience.
-------------------------------------------------------
### OutgoingMessage
An `OutgoingMessage` object is returned by `coap.request` or
emitted by the `coap.createServer` `'response'` event.
It may be used to access response status, headers and data.
It implements the [Writable
Stream](http://nodejs.org/api/stream.html#stream_class_stream_writable) interface, as well as the
following additional properties, methods and events.
#### message.code
The CoAP code of the message.
It is HTTP-compatible, as it can be passed `404`.
#### message.statusCode
(same as message.code)
#### message.setOption(name, value)
Sets a single option value.
All the options are in binary format, except for
`'Content-Format'`, `'Accept'`, `'Max-Age'` and `'ETag'`.
See registerOption
to know how to register more.
Use an array of buffers
if you need to send multiple options with the same name.
If you need to pass a custom option, pass a string containing a
a number as key and a `Buffer` as value.
Example:
```js
message.setOption('Content-Format', 'application/json')
```
or
```js
message.setOption('555', [Buffer.from('abcde'), Buffer.from('ghi')])
```
`setOption` is also aliased as `setHeader` for HTTP API
compatibility.
Also, `'Content-Type'` is aliased to `'Content-Format'` for HTTP
compatibility.
Since v0.7.0, this library supports blockwise transfers, you can trigger
them by adding a `req.setOption('Block2', Buffer.of(0x2))` to the
output of [request](#request).
And since v0.25.0, this library supports rudimentry type 1 blockwise transfers, you can trigger
them by adding a `req.setOption('Block1', Buffer.of(0x2))` to the
options of [request](#request).
(The hex value 0x2 specifies the size of the blocks to transfer with.
Use values 0 to 6 for 16 to 1024 byte block sizes respectively.)
See the
[spec](http://tools.ietf.org/html/draft-ietf-core-coap-18#section-5.4)
for all the possible options.
#### message.reset()
Returns a Reset COAP Message to the sender. The RST message will appear as an empty message with code `0.00` and the
reset flag set to `true` to the caller. This action ends the interaction with the caller.
#### message.writeHead(code, headers)
Functions somewhat like `http`'s `writeHead()` function. If `code` is does not match the CoAP code mask of `#.##`, it is coerced into this mask. `headers` is an object with keys being the header names, and values being the header values.
#### message.on('timeout', function(err) { })
Emitted when the request does not receive a response or acknowledgement within a transaction lifetime.
`Error` object with message `No reply in XXXs` and `retransmitTimeout` property is provided as a parameter.
#### message.on('error', function(err) { })
Emitted when an error occurs. This can be due to socket error, confirmable message timeout or any other generic error.
`Error` object is provided, that describes the error.
-------------------------------------------------------
### IncomingMessage
An `IncomingMessage` object is created by `coap.createServer` or
`coap.request`
and passed as the first argument to the `'request'` and `'response'` event
respectively. It may be used to access response status, headers and data.
It implements the [Readable
Stream](http://nodejs.org/api/stream.html#stream_class_stream_readable) interface, as well as the
following additional methods and properties.
#### message.payload
The full payload of the message, as a Buffer.
#### message.options
All the CoAP options, as parsed by
[CoAP-packet](http://github.com/mcollina/coap-packet).
All the options are in binary format, except for
`'Content-Format'`, `'Accept'` and `'ETag'`.
See registerOption() to know how to register more.
See the
[spec](http://tools.ietf.org/html/draft-ietf-core-coap-18#section-5.4)
for all the possible options.
#### message.headers
All the CoAP options that can be represented in a human-readable format.
Currently they are only `'Content-Format'`, `'Accept'` and
`'ETag'`.
See to know how to register more.
Also, `'Content-Type'` is aliased to `'Content-Format'` for HTTP
compatibility.
#### message.code
The CoAP code of the message.
#### message.method
The method of the message, it might be
`'GET'`, `'POST'`, `'PUT'`, `'DELETE'` or `null`.
It is null if the CoAP code cannot be parsed into a method, i.e. it is
not in the '0.' range.
#### message.url
The URL of the request, e.g.
`'coap://localhost:12345/hello/world?a=b&b=c'`.
#### message.rsinfo
The sender informations, as emitted by the socket.
See [the `dgram` docs](http://nodejs.org/api/dgram.html#dgram_event_message) for details
#### message.outSocket
Information about the socket used for the communication (address and port).
-------------------------------------------------------
### ObserveReadStream
An `ObserveReadStream` object is created by `coap.request` to handle
_observe_ requests.
It is passed as the first argument to the `'response'` event.
It may be used to access response status, headers and data as they are
sent by the server.
__Each new observe message from the server is a new `'data'` event__.
It implements the [Readable
Stream](http://nodejs.org/api/stream.html#stream_class_stream_readable)
and [IncomingMessage](#incoming) interfaces, as well as the
following additional methods, events and properties.
#### close()
Closes the stream.
#### message.rsinfo
The sender's information, as emitted by the socket.
See [the `dgram` docs](http://nodejs.org/api/dgram.html#dgram_event_message) for details
#### message.outSocket
Information about the socket used for the communication (address and port).
-------------------------------------------------------
### ObserveWriteStream
An `ObserveWriteStream` object is
emitted by the `coap.createServer` `'response'` event as a response
object.
It may be used to set response status, headers and stream changing data
to the client.
Each new `write()` call is a __new message__ being sent to the client.
It implements the [Writable
Stream](http://nodejs.org/api/stream.html#stream_class_stream_writable)
interface, as well as the
following additional methods and properties.
#### Event: 'finish'
Emitted when the client is not sending 'acks' anymore for the sent
messages.
#### reset()
Returns a Reset COAP Message to the sender. The RST message will appear as an empty message with code `0.00` and the
reset flag set to `true` to the caller. This action ends the interaction with the caller.
-------------------------------------------------------
### coap.registerOption(name, toBinary, toString)
Register a new option to be converted to string and added to the
`message.headers`.
`toBinary` is a function that accept a string and returns a `Buffer`.
`toString` is a function that accept a `Buffer` and returns a `String`.
-------------------------------------------------------
### coap.ignoreOption(name)
Explicitly ignore an option; useful for compatibility with `http`-based
modules.
-------------------------------------------------------
### coap.registerFormat(name, value)
Register a new format to be interpreted and sent in CoAP
`Content-Format` option.
Each format is identified by a number, see the [Content-Format
registry](https://www.iana.org/assignments/core-parameters/core-parameters.xhtml#content-formats).
These are the defaults formats:
| Media Type | ID |
| :-------------------------------------------------------: | :---: |
| `text/plain` | 0 |
| `application/cose; cose-type="cose-encrypt0"` | 16 |
| `application/cose; cose-type="cose-mac0"` | 17 |
| `application/cose; cose-type="cose-sign1"` | 18 |
| `application/link-format` | 40 |
| `application/xml` | 41 |
| `application/octet-stream` | 42 |
| `application/exi` | 47 |
| `application/json` | 50 |
| `application/json-patch+json` | 51 |
| `application/merge-patch+json` | 52 |
| `application/cbor` | 60 |
| `application/cwt` | 61 |
| `application/multipart-core` | 62 |
| `application/cbor-seq` | 63 |
| `application/cose-key` | 101 |
| `application/cose-key-set` | 102 |
| `application/senml+json` | 110 |
| `application/sensml+json` | 111 |
| `application/senml+cbor` | 112 |
| `application/sensml+cbor` | 113 |
| `application/senml-exi` | 114 |
| `application/sensml-exi` | 115 |
| `application/coap-group+json` | 256 |
| `application/dots+cbor` | 271 |
| `application/missing-blocks+cbor-seq` | 272 |
| `application/pkcs7-mime; smime-type=server-generated-key` | 280 |
| `application/pkcs7-mime; smime-type=certs-only` | 281 |
| `application/pkcs8` | 284 |
| `application/csrattrs` | 285 |
| `application/pkcs10` | 286 |
| `application/pkix-cert` | 287 |
| `application/senml+xml` | 310 |
| `application/sensml+xml` | 311 |
| `application/senml-etch+json` | 320 |
| `application/senml-etch+cbor` | 322 |
| `application/td+json` | 432 |
| `application/vnd.ocf+cbor` | 10000 |
| `application/oscore` | 10001 |
| `application/javascript` | 10002 |
| `application/vnd.oma.lwm2m+tlv` | 11542 |
| `application/vnd.oma.lwm2m+json` | 11543 |
| `application/vnd.oma.lwm2m+cbor` | 11544 |
| `text/css` | 20000 |
| `image/svg+xml` | 30000 |
-------------------------------------------------------
### coap.Agent([opts])
An Agent encapsulate an UDP Socket. It uses a combination of `messageId`
and `token` to distinguish between the different exchanges.
The socket will auto-close itself when no more exchange are in place.
By default, no UDP socket are open, and it is opened on demand to send
the messages.
Opts is an optional object with the following optional properties:
* `type`: `'udp4'` or `'udp6'` if we want an Agent on an IPv4 or IPv6
UDP socket.
* `socket`: use existing socket instead of creating a new one.
-------------------------------------------------------
### coap.globalAgent
The default [`Agent`](#agent) for IPv4.
-------------------------------------------------------
### coap.globalAgentIPv6
The default [`Agent`](#agent) for IPv6.
-------------------------------------------------------
### coap.updateTiming
You can update the CoAP timing settings, take a look at the examples:
```js
const coapTiming = {
ackTimeout: 0.25,
ackRandomFactor: 1.0,
maxRetransmit: 3,
maxLatency: 2,
piggybackReplyMs: 10
}
coap.updateTiming(coapTiming)
```
-------------------------------------------------------
### coap.defaultTiming
Reset the CoAP timings to the default values
__node-coap__ is an **OPEN Open Source Project**. This means that:
> Individuals making significant and valuable contributions are given commit-access to the project to contribute as they see fit. This project is more like an open wiki than a standard guarded open source project.
See the [CONTRIBUTING.md](https://github.com/mcollina/node-coap/blob/master/CONTRIBUTING.md) file for more details.
## Contributors
__node-coap__ is only possible due to the excellent work of the following contributors:
Matteo CollinaGitHub/mcollinaTwitter/@matteocollina
Nguyen Quoc DinhGitHub/nqdTwitter/@nqdinh
Daniel Moran JimenezGitHub/dmoranjTwitter/@erzeneca
Ignacio MartínGitHub/neichTwitter/@natxupitxu
Christopher HillerGitHub/boneskullTwitter/@b0neskull
## LICENSE
MIT, see LICENSE.md file.