https://github.com/cpq/xmc1100
https://github.com/cpq/xmc1100
Last synced: 26 days ago
JSON representation
- Host: GitHub
- URL: https://github.com/cpq/xmc1100
- Owner: cpq
- Created: 2024-03-04T09:36:28.000Z (about 1 year ago)
- Default Branch: main
- Last Pushed: 2024-03-04T09:36:33.000Z (about 1 year ago)
- Last Synced: 2025-02-07T19:31:26.551Z (3 months ago)
- Language: C
- Size: 24.4 KB
- Stars: 1
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# Baremetal firmware for xmc1100 2Go devboard
This firmware implements a simple blinky on an Infineon XMC1100 2Go
development board, based on a 32Mhz Cortex-M0 MCU with 16k RAM, 64k flash, and
some peripherals including WDT, RTC, PRNG, USIC (serial: SPI, I2C, UART), ADC,
GPIO and a temperature sensor. The
[data sheet](https://www.infineon.com/dgdl/Infineon-xmc1100-AB_rm-UM-v01_03-EN.pdf?fileId=5546d46249cd1014014a0a8438a65e29#page=769&zoom=100,48,401)
available from the Infineon website.
## xmc1100 2Go devboard
This little development board has a built-in j-link compatible debugger,
which makes it easy to program and debug using Segger j-link software.
It has 2 on-board LEDs, attached to P1.0 and P1.1 (in the source code,
those are pins B0 and B1). Both pins are red.
## Software Requirements
- ARM GCC, https://launchpad.net/gcc-arm-embedded
- GNU make, http://www.gnu.org/software/make/
- J-Link software, http://www.segger.com/jlink-software.html
## Build and flash
```sh
$ make build flash
```