Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/cyberdns/lupusec2mqtt
Lupusec Alarm System to Mqtt
https://github.com/cyberdns/lupusec2mqtt
alarm home-assistant homeassistant lupusec mqtt smarthome
Last synced: about 2 months ago
JSON representation
Lupusec Alarm System to Mqtt
- Host: GitHub
- URL: https://github.com/cyberdns/lupusec2mqtt
- Owner: CyberDNS
- License: mit
- Created: 2019-10-06T08:04:11.000Z (about 5 years ago)
- Default Branch: master
- Last Pushed: 2024-08-23T16:06:59.000Z (4 months ago)
- Last Synced: 2024-08-23T18:01:43.241Z (4 months ago)
- Topics: alarm, home-assistant, homeassistant, lupusec, mqtt, smarthome
- Language: C#
- Homepage:
- Size: 800 KB
- Stars: 11
- Watchers: 3
- Forks: 5
- Open Issues: 4
-
Metadata Files:
- Readme: README.md
- Contributing: CONTRIBUTING.md
- License: LICENSE
Awesome Lists containing this project
README
# Lupusec2Mqtt
Make your Lupusec XT2 (and compatible) Alarm System available on an MQTT Broker (compatible with Home Assistant).
### Tested with
- XT1 Plus
- XT2
- XT2 Plus
### What is already working
- Alarm panel (config, state, set)
- Burglar Alarm state (config, state)
- Open/Close contacts (config, state)
- Movement detector (config, state)
- Power switch (config, state, set, power, energy)
- Lock (config, state, set)
- Temperature/Humidity sensor (config, state)
- Smoke detector (config, state)
- Vibration detector (config, state)
- Cover (config, state, position, set, set position)
## Installation
## Home Assistant Addon
It is available as Addon that can be directly installed by the Supervisor tab.
The repository is: https://github.com/CyberDNS/hassio-addons-repository
## Manual Docker Configuration
### Alternative 1: Environment variables
For users who want to run Lupusec2Mqtt as a standalone Docker container (not as a Home Assistant addon), you can use the following `docker run` command as an example for the amd64 architecture:
```bash
docker run -e "Mqtt__Server=127.0.0.1" -e "Mqtt__Login=" -e "Mqtt__Password=" -e "Lupusec__Url=http://192.168.2.50" -e "Lupusec__Login=admin" -e "Lupusec__Password=lupusecpassword" -e "MotionSensor__DetectionDuration=120" -e "Serilog__MinimumLevel__Default=Information" cyberdns/lupusec2mqtt_hassaddon_amd64:3.1.2
```
Replace the architecture in the last part of the image name based on your system:
```json
"arch": [
"aarch64",
"amd64",
"armhf",
"armv7"
]
```
### Alternative 2: Volumes
An alternative approach is to use Docker volumes. The settings are located in the container at `/data/options.json`. The file should look like this:
```json
{
"Mqtt:Server": "127.0.0.1",
"Mqtt:Login": "",
"Mqtt:Password": "",
"Lupusec:Url": "http://192.168.2.50",
"Lupusec:Login": "admin",
"Lupusec:Password": "lupusecpassword",
"Serilog:MinimumLevel:Default": "Information",
"MotionSensor:DetectionDuration": 120,
"PollFrequencyInSeconds": 2
}
```