Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/damiencorpataux/raspi-j85480s1-monitor

Raspi-based network interface for monitoring the General Electric Lineage J85480S1 Power Supply
https://github.com/damiencorpataux/raspi-j85480s1-monitor

c10g casa cmts monitoring psu raspi

Last synced: 2 days ago
JSON representation

Raspi-based network interface for monitoring the General Electric Lineage J85480S1 Power Supply

Host: GitHub
URL: https://github.com/damiencorpataux/raspi-j85480s1-monitor
Owner: damiencorpataux
License: gpl-3.0
Created: 2016-11-01T14:43:20.000Z (about 8 years ago)
Default Branch: master
Last Pushed: 2022-12-26T19:47:02.000Z (almost 2 years ago)
Last Synced: 2024-04-29T00:09:26.269Z (6 months ago)
Topics: c10g, casa, cmts, monitoring, psu, raspi
Language: Python
Size: 1.28 MB
Stars: 2
Watchers: 2
Forks: 0
Open Issues: 4
Metadata Files:
- Readme: README.md
- License: LICENSE

Awesome Lists containing this project

README

CMTS CPL Monitor
================

A project for monitoring LINEAGE J85480S1 power-supplies, involving:
- LINEAGE J85480S1 and its J1 connector
- A Rapberrypi and its GPIO connector
- RPi.GPIO and Flask python libraries
- gunicorn and systemd

Installation (Debian)
---------------------

### Install and configure the web-service
```
sudo apt-get install python python-dev python-pip git
git clone {repository-url} cmts-cpl-monitor
cd cmts-cpl-monitor
sudo pip install -r requirements.txt
vi config.py # optionally update with your preferred pinout, or not
python web.py # test the service with built-in dev web server
curl localhost:5000 # check the web-service output
```

### Install and configure gunicorn
```
sudo apt-get install gunicorn # install gunicorn wsgi server
sudo cp `pwd`/systemd.service /etc/systemd/system/cmts-cpl-monitor.service # create systemd service
sudo systemctl start cmts-cpl-monitor # start the service
sudo systemctl status cmts-cpl-monitor # check the service state
curl localhost # check the web-service output
sudo systemctl enable cmts-cpl-monitor # start the service upon boot
```

### Testing with curl
```
curl localhost[:5000]
```
displays:
```
{
"alarms": {
"1": {
"AC Present but not within limits": false,
"AC not present": false,
"Blown AC Fuse in Unit": false,
"Boost Stage Failure": false,
"Defective Fan": false,
"No AC <15mS (single unit) ": false,
"Non-catastrophic Internal Failure": false,
"OK": true,
"Over Current": false,
"Over Voltage Latched Shutdown": false,
"Thermal Shutdown ": false
},
"2": {
"AC Present but not within limits": false,
"AC not present": false,
"Blown AC Fuse in Unit": false,
"Boost Stage Failure": false,
"Defective Fan": false,
"No AC <15mS (single unit) ": false,
"Non-catastrophic Internal Failure": false,
"OK": true,
"Over Current": false,
"Over Voltage Latched Shutdown": false,
"Thermal Shutdown ": false
},
"3": {
"AC Present but not within limits": false,
"AC not present": false,
"Blown AC Fuse in Unit": false,
"Boost Stage Failure": false,
"Defective Fan": false,
"No AC <15mS (single unit) ": false,
"Non-catastrophic Internal Failure": false,
"OK": false,
"Over Current": false,
"Over Voltage Latched Shutdown": false,
"Thermal Shutdown ": false
},
"4": {
"AC Present but not within limits": true,
"AC not present": true,
"Blown AC Fuse in Unit": false,
"Boost Stage Failure": false,
"Defective Fan": false,
"No AC <15mS (single unit) ": true,
"Non-catastrophic Internal Failure": false,
"OK": false,
"Over Current": true,
"Over Voltage Latched Shutdown": false,
"Thermal Shutdown ": false
}
},
"human": {
"Fault": false,
"MOD_PRES_1": true,
"MOD_PRES_2": true,
"MOD_PRES_3": false,
"MOD_PRES_4": true,
"OTW": false,
"PFW_1": false,
"PFW_2": false,
"PFW_3": false,
"PFW_4": true,
"POWER_CAP_1": "2000W",
"POWER_CAP_2": "2000W",
"POWER_CAP_3": "2000W",
"POWER_CAP_4": "2000W"
},
"raw": {
"Fault": 1,
"MOD_PRES_1": 0,
"MOD_PRES_2": 0,
"MOD_PRES_3": 1,
"MOD_PRES_4": 0,
"OTW": 1,
"PFW_1": 1,
"PFW_2": 1,
"PFW_3": 1,
"PFW_4": 0,
"POWER_CAP_1": 1,
"POWER_CAP_2": 1,
"POWER_CAP_3": 1,
"POWER_CAP_4": 1
}
}
```

Sources
-------

* LINEAGE Shelf J85480S1 Documentation
http://apps.geindustrial.com/publibrary/checkout/J85480S1?TNR=Data%20Sheets%7CJ85480S1%7Cgeneric
* LINEAGE CPL CP2000AC54 Documentation
http://apps.geindustrial.com/publibrary/checkout/CP2000AC54?TNR=Data%20Sheets%7CCP2000AC54%7CPDF&filename=CP2000AC54.pdf