https://github.com/dawoox/alfawiseu30marlin

Config files to make Marlin works on an Alfawise U30.
https://github.com/dawoox/alfawiseu30marlin

Last synced: about 6 hours ago
JSON representation

Config files to make Marlin works on an Alfawise U30.

• Host: GitHub
• URL: https://github.com/dawoox/alfawiseu30marlin
• Owner: Dawoox
• Created: 2024-02-17T14:26:56.000Z (9 months ago)
• Default Branch: main
• Last Pushed: 2024-05-28T09:53:40.000Z (5 months ago)
• Last Synced: 2024-10-12T00:26:05.976Z (27 days ago)
• Language: C
• Size: 122 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# Marlin configuration for an Alfawise U30

This is my config for my modded Alfawise U30 running Marlin.

Current version is made for Marlin version **2.1.2.1**

### List of mods applied to the printer

* Installation of a CR-Touch

* Removing of the filament runout sensor *(it broke in 3 months)*

### Credits

The base of the configuration came from [this thread](https://www.lesimprimantes3d.fr/forum/topic/22306-tuto-alfawise-u20x-u30-flasher-marlin-2x-firmware-alternatif) on french 3d printer forum but was heavily edited to make it work with newer versions of Marlin as this thread is already 5 years old.