Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/dewenni/esp_marley_mqtt
Control your Marley Fresh air heat exchanger MEnV with ESP8266 and MQTT
https://github.com/dewenni/esp_marley_mqtt
433mhz cc1101 esp8266 marley marley-menv mqtt wemos-d1-mini
Last synced: 14 days ago
JSON representation
Control your Marley Fresh air heat exchanger MEnV with ESP8266 and MQTT
- Host: GitHub
- URL: https://github.com/dewenni/esp_marley_mqtt
- Owner: dewenni
- Created: 2022-11-22T21:16:40.000Z (about 2 years ago)
- Default Branch: main
- Last Pushed: 2022-11-22T21:20:27.000Z (about 2 years ago)
- Last Synced: 2024-12-22T05:34:00.937Z (17 days ago)
- Topics: 433mhz, cc1101, esp8266, marley, marley-menv, mqtt, wemos-d1-mini
- Language: C++
- Homepage:
- Size: 9.77 KB
- Stars: 2
- Watchers: 1
- Forks: 0
- Open Issues: 1
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# ESP_Marley_MQTT
Control your Marley Fresh air heat exchanger MEnV with ESP8266 and MQTT
This project was tested with Marley MEnV 180mm (1. Edition)
---
## Hardware Requirements
### ESP-Module
Any kind of ESP with SPI interface and at least 2 GPIO to select TX and RX.
I have used a Wemos D1 mini based on ESP8266
### 433Mhz Module
For the 433Mhz communication with the Marley MEnV, I recomment the CC1101 Module, that is able to send and receive within one module.
### Wiring
Wemos D1 | CC1101
---------|-------
D1 | GD02
D2 | GD00
D5 | SCLK
D6 | SO
D7 | SI
D8 | CSN
---
## MQTT Communication
### You can control the MEnV with the following commands:
```
Topic: esp_marley/cmd/power
Payload: 0=OFF / 1=OFF
Topic: esp_marley/cmd/summer
Payload: 1=ON
Topic: esp_marley/cmd/interval
Payload: 1=SLOW / 2=MIDDLE / 3=FAST
```
### As Status you will get informations as JSON Object:
```
Topic: esp_marley/info = {
"mode":"OFF/SUMMER/INTERVAL",
"speed":"NONE/SLOW/MIDDLE/FAST",
"direction":"NONE/IN/OUT"
}
Topic: esp_marley/wifi = {
"status":"online",
"rssi":"-50",
"signal":"90",
"ip":"192.168.1.1",
"date-time":"01.01.2022 - 10:20:30"
}
Topic: esp_marley/received = {
"data":"0x8EA06E",
"delay":"300",
"bit":"24",
"protocol":"1",
"rssi":"-40"
}
```