https://github.com/dominikjezik/tizen-watchface-sourcecode

Watchface for Tizen OS (Samsung Galaxy Watch Active 2) styled as C# source code with Visual Studio default color scheme.
https://github.com/dominikjezik/tizen-watchface-sourcecode

csharp galaxy-watch-studio samsung samsung-galaxy-watch tizen visual-studio watchface

Last synced: 7 months ago
JSON representation

Watchface for Tizen OS (Samsung Galaxy Watch Active 2) styled as C# source code with Visual Studio default color scheme.

• Host: GitHub
• URL: https://github.com/dominikjezik/tizen-watchface-sourcecode
• Owner: dominikjezik
• License: mit
• Created: 2024-06-07T15:08:36.000Z (over 1 year ago)
• Default Branch: main
• Last Pushed: 2024-06-07T15:33:28.000Z (over 1 year ago)
• Last Synced: 2025-01-12T16:34:27.710Z (9 months ago)
• Topics: csharp, galaxy-watch-studio, samsung, samsung-galaxy-watch, tizen, visual-studio, watchface
• Homepage:
• Size: 847 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

          


    

    


    SourceCode watchface for Tizen

    




This is a simple watchface for Tizen operating system (tested on Samsung Galaxy Watch Active 2 with Tizen 5.5.0.2). Watchface is styled as C# source code with Visual Studio default color scheme. It displays current time, date, battery level and steps count.

## Preview



    

    


    


    



## Installation

Because GalaxyWatchStudio is no longer supported by Samsung, installation is a bit tricky. Very helpful is [this forum post](https://forum.developer.samsung.com/t/getting-samsung-distributor-certificate/27222/82).

Installation steps:

1. On watch enable debugging mode and connect to same Wi-Fi network as your PC. Debugging mode can be enabled in `Settings -> About watch -> Debugging `.

2. Reboot your watch (this is important step).

3. Open Galaxy Watch Studio and file from this repository `vscoding.gwd`.

4. Connect to your watch by entering its IP address.

5. Open Tizen Studio and using `Tools -> Package Manager -> Extension SDK` install extensions: `Samsung Certificate Extension` and `Samsung Wearable Extension`.

6. After installation go back to Tizen Studio and in `Tools -> Device Manager -> Remote Device Manager (right second icon)` add your watch (connection On).

7. In Tizen Studio go to `Tools -> Certificate Manager -> +` and create new certificate profile.  Type of certificate is `Samsung`.

8. Close Tizen Studio and GalaxyWatchStudio and go to `C:\Users\{your_user}\SamsungCertificate\{name_of_certificate_profile}` and copy content of this folder to these (and content in these folder delete before):

   - `C:\Program Files\Galaxy Watch Studio\tizen\keystore`

   - `C:\Users\{your_user}\GearWatchDesigner\keystore`

   - `C:\Fit2Installer\cert`

9. Open GalaxyWatchStudio and `vscode.gwd` file from this repository.

10. Press F10 to build watchface and enter your certificate password.

11. It will display error message after building, but watchface should be built in file `vscoding_TW5.tpk` (same folder where is `vscode.gwd`).

12. Using Fit2Installer install `vscoding_TW5.tpk` on your watch:

    - copy `vscoding_TW5.tpk` to `sign_me` folder in Fit2Installer

    - run `connect.bat` (type your watch IP address and press Enter, it will probably display error message, but when you will run it again it should be already connected)

    - run `sign.bat` (type your certificate password and press Enter)

    - run `install.bat`

    - run `disconnect.bat`

13. Watchface should be installed on your watch. In `Settings -> Apps -> Permissions` allow all permissions for this watchface.

14. Change watchface to `SourceCode` by holding on current watchface and swiping left/right.