https://github.com/elasticrash/kyria_case

a case meant to be 3d printed
https://github.com/elasticrash/kyria_case

keyboard-case

Last synced: 2 months ago
JSON representation

a case meant to be 3d printed

• Host: GitHub
• URL: https://github.com/elasticrash/kyria_case
• Owner: elasticrash
• License: other
• Created: 2021-09-23T23:02:54.000Z (over 3 years ago)
• Default Branch: main
• Last Pushed: 2021-09-28T21:09:05.000Z (over 3 years ago)
• Last Synced: 2025-01-02T18:47:18.194Z (4 months ago)
• Topics: keyboard-case
• Homepage:
• Size: 10.6 MB
• Stars: 2
• Watchers: 2
• Forks: 1
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
## EC Kyria_Case V1.3

A case meant to be 3d printed.

This version is usable. I'll admit that certain things can be improved but personally after printing this version I am happy.

This assembly has been tested with a 2mm plate (although I guess plateless will work as well but there will be some gap between the top part of the case and the pcb.

I plan to test it with 3mm plate in the near future.

* I am using M2 3mm heat inserts for both the bottom of the case as well as for the top of the case. 

* I tighten the two parts together by using a 2M screws and nuts.

* the pcb is screwed to the bottom half with flat screws

![Image](2021-09-24_000425.png)

![Image](2021-09-24_000457.png)

![Image](20210919_1135092.jpg)

## EC Kyria_Case V1.4 

This is an improved version of the case by [G-Radiation](https://github.com/G-Radiation)

It uses M4 screws for tenting, you will need to use the corresponding nuts. 

![Image](2021-09-26_232053.png)

## credits

The cases hosted in this repository are based on the designs hosted in the official [splitkb](https://github.com/splitkb/kyria)  repository.