https://github.com/elasticrash/plaid_keyboard_case

https://github.com/elasticrash/plaid_keyboard_case

keyboard-case

Last synced: 2 months ago
JSON representation

• Host: GitHub
• URL: https://github.com/elasticrash/plaid_keyboard_case
• Owner: elasticrash
• Created: 2020-10-19T20:19:12.000Z (over 4 years ago)
• Default Branch: master
• Last Pushed: 2020-10-19T20:48:27.000Z (over 4 years ago)
• Last Synced: 2025-01-02T18:47:18.773Z (4 months ago)
• Topics: keyboard-case
• Language: OpenSCAD
• Homepage:
• Size: 3.56 MB
• Stars: 2
• Watchers: 2
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: Readme.md

Awesome Lists containing this project

README

        
# Plaid Case designed by Me

featuring a really badly written scad file :)

Bear in mind that this case features a really tight fit and depending on the material you are using in most cases I would advice adding an extra millimeter.

Since I managed to push the plaid with some slight difficulty, I am not going to attempt reprinting. As you most know, it takes quite a long time for each attempt.

Any improvements are more than welcomed.

This case is not your ordinary case, its a combination of sandwich case and who knows a normal case :D

it's meant to be snugged between the top and bottom plate.

![bottom](https://github.com/elasticrash/plaid_keyboard_case/blob/master/Images/DSC_1024.jpg?raw=true)

As a bonus I drilled two holes on the plate for a pair of feet, becomes I didn't like the angle much

![side](./Images/DSC_1023.JPG)

![back](./Images/DSC_1025.JPG)