Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/elmot/h7-wake-on-lan

STM32 NUCLEO-H745ZI-Q Wake-On-LAN demo
https://github.com/elmot/h7-wake-on-lan

arm clion clion-cmake clion-embedded clion-ide cmake gcc network nucleo-board stm32 stm32h7

Last synced: 3 days ago
JSON representation

STM32 NUCLEO-H745ZI-Q Wake-On-LAN demo

Awesome Lists containing this project

README 

        
CLion example project for STM32H745 MCU and NUCLEO-H745ZI-Q board

====

Example project for [STM32H745 Nucleo-144](https://www.st.com/en/evaluation-tools/nucleo-h755zi-q.html) board.

Only CM7 is actually used.



**This example is specially made for multi-core MCUs, like some of STM32H7xx chips**



**Single-core STM32 MCUs are [supported out-of-the-box](https://www.jetbrains.com/help/clion/embedded-development.html)**



Tools required

====

* [STM32CubeMX](https://www.st.com/en/development-tools/stm32cubemx.html) and STM32H7 software pack

* [CLion 2022.2+](https://www.jetbrains.com/clion/) and it's bundled `Embedded Development Support` plugin

* [GNU Arm Embedded Toolchain](https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm)

* [STM32CubeIDE](https://www.st.com/en/development-tools/stm32cubeide.html)

* (Windows only) [MinGW](https://sourceforge.net/projects/mingw-w64/files/mingw-w64/mingw-w64-release/)



Steps to make a similar project

====

1. Install and configure all the required tools. See [CLion Quick start guide](https://www.jetbrains.com/help/clion/clion-quick-start-guide.html)

2. Start STM32CubeMX and make a new project.

    * **Note I. On the `Project Manager` tab, `Toolchain/IDE` field must be set to `STM32CubeIDE`**

    * **Note II. Do not use space, international, or special characters for project name or path**

3. Generate the project code. STM32CubeMX will create a project folder with two separate subprojects

4. Download and put [CMakeLists.txt for this gist](https://gist.github.com/elmot/c48f756c5443c4a003978db94392e00d) to the projects root

5. Now check all the `TODO` comments in the `CMakeLists.txt` file and put actual values instead.

   [TODO tool window](https://www.jetbrains.com/help/clion/todo-tool-window.html)

6. Open the root project in [CLion](https://www.jetbrains.com/help/clion/opening-reopening-and-closing-projects.html).

7. Your CMake project will be parsed. If there are errors, correct them and select `Tools -> CMake -> Reset Cache and Reload Prpject` from the main menu.

   Repeat until everything is fixed and the CMakeLists is successfully parsed.

8. Create `Run Configurations` for both core binaries - CM4 and CM7. 

    1. Select create new [Embedded GDB Server](https://www.jetbrains.com/help/clion/embedded-gdb-server.html) run configuration.

    2. Select `Target` and `Executable`for correaponding core.

    4. Set `tcp::` to `'target remote' args` field.

       The port number may be virtually any in range 1024..65535 but it must nt clash with the conterpart project port number.

       Use the same number below

    5. Locate `ST-LINK_gdbserver` executable and select for as `GDB server`

       The executable resides in the in `STM32CubeIDE` installation folder,

       `plugins/com.st.stm32cube.ide.mcu.externaltools.stlink-gdb-server.????/tools/bin/` subfolder.

       Actual name varies from version to version, and exact name can't be provided

    6. Locate `STM32_Programmer_CLI` executable similar way, but the folder expected to be

       `plugins/com.st.stm32cube.ide.mcu.externaltools.cubeprogrammer.???/tools/bin/` then add

       *path to the folder* as a `-cp` key value to `GDB Server args` field

    7. Add `-t -d -p  -m ` keys to `GDB Server args` field.

        * The `` parameter is `0` for Cortex-M7 or `3` for Cortex-M4 kernels. Other MCU models may support other numbers.

        * Final arguments form is `-cp  -t -d -p  -m `

9. Try to build both executables. If something goes wrong, fix your `CMakeLists.txt` and sources.

10. Click `Debug` for both executables. The firmware for both kernels should be flashed and started.

11. Enjoy your newly-created project.



Ethernet support(lwip)

=============



[Follow the guide with respect that we're working with CLion](https://community.st.com/s/article/How-to-create-project-for-STM32H7-with-Ethernet-and-LwIP-stack-working)



Notes:

---



* Additional memory mapping is done via [user-defined linker script](CM7/STM32H745ZITX_USER.ld)

* Some lines a