https://github.com/ether1project/public-rpc-setup

https://github.com/ether1project/public-rpc-setup

Last synced: about 2 months ago
JSON representation

• Host: GitHub
• URL: https://github.com/ether1project/public-rpc-setup
• Owner: Ether1Project
• Created: 2020-09-22T12:32:26.000Z (over 4 years ago)
• Default Branch: master
• Last Pushed: 2022-03-12T19:03:12.000Z (almost 3 years ago)
• Last Synced: 2024-04-11T13:41:01.164Z (9 months ago)
• Size: 2.93 KB
• Stars: 0
• Watchers: 1
• Forks: 1
• Open Issues: 1
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# public-rpc-setup

### This guide will show you how to setup a public rpc node for Ether-1

#### Setting Up the Server & Building geth

```bash

apt-get update

apt-get upgrade -y

apt-get install build-essential nano git

wget https://golang.org/dl/go1.15.2.linux-amd64.tar.gz

sudo tar -xvf go1.15.2.linux-amd64.tar.gz

sudo mv go /usr/local

nano ~/.profile

# Add the lines below to the bottom of the file

export GOROOT=/usr/local/go

export GOPATH=$ROOT

export PATH=$GOPATH/bin:$GOROOT/bin:$PATH

# Exit nano with CRTL+X (Make sure you save)

source ~/.profile

git clone https://github.com/Ether1Project/Ether1 && cd Ether1 && make && cd

```

### Installing nginx & Setting up the services

```bash 

sudo apt-get install nginx 

nano /etc/systemd/system/ether1node.service

# Copy and paste the following into the file - remember to replace  with your node name

[Unit]

Description=RPC Node

After=network.target

[Service]

User=root

Group=root

Type=simple

Restart=always

ExecStart=/root/Ether1/build/bin/geth --cache=512 --rpcvhosts="*" --rpc --rpcport "8545" --rpcaddr "127.0.0.1" --rpccorsdomain "*" --nat "any" --rpcapi "eth,web3,personal,net" --syncmode "full" -ethstats ":[email protected]"

[Install]

WantedBy=default.target

# Exit nano - save your changes!

systemctl enable ether1node && systemctl start ether1nod

nano /etc/nginx/sites-enabled/default

# Use CRTL+K to clear out the files contents & replace with the below - Replace RPC_URL_HERE with your rpc url for example: rpc.ether1.org

server {

server_name RPC_URL_HERE;

 location / {

      proxy_pass http://localhost:8545/;

      proxy_set_header Host $host;

 }

}

# Exit nano - save your changes!

systemctl restart nginx

```

#### Enable SSL

```bash

sudo apt install snapd

sudo snap install --classic certbot

# Read instructions from the next command carefully

sudo certbot --nginx  

# Test Automatic SSL Cert Renewal

sudo certbot renew --dry-run

```