https://github.com/eugeny/shutterspeed
super WIP
https://github.com/eugeny/shutterspeed
Last synced: about 2 months ago
JSON representation
super WIP
- Host: GitHub
- URL: https://github.com/eugeny/shutterspeed
- Owner: Eugeny
- License: apache-2.0
- Created: 2023-11-19T15:44:44.000Z (over 1 year ago)
- Default Branch: display
- Last Pushed: 2023-11-19T15:44:59.000Z (over 1 year ago)
- Last Synced: 2025-02-05T02:54:27.270Z (3 months ago)
- Language: Rust
- Homepage:
- Size: 20.5 KB
- Stars: 1
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE-APACHE
Awesome Lists containing this project
README
shutterspeed
============
Rust project for the _Arduino Uno_.
## Build Instructions
1. Install prerequisites as described in the [`avr-hal` README] (`avr-gcc`, `avr-libc`, `avrdude`, [`ravedude`]).
2. Run `cargo build` to build the firmware.
3. Run `cargo run` to flash the firmware to a connected board. If `ravedude`
fails to detect your board, check its documentation at
.
4. `ravedude` will open a console session after flashing where you can interact
with the UART console of your board.
[`avr-hal` README]: https://github.com/Rahix/avr-hal#readme
[`ravedude`]: https://crates.io/crates/ravedude
## License
Licensed under either of
- Apache License, Version 2.0
([LICENSE-APACHE](LICENSE-APACHE) or )
- MIT license
([LICENSE-MIT](LICENSE-MIT) or )
at your option.
## Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted
for inclusion in the work by you, as defined in the Apache-2.0 license, shall
be dual licensed as above, without any additional terms or conditions.