https://github.com/f4exb/stund
STUN server and client that can send a fixed address
https://github.com/f4exb/stund
Last synced: 16 days ago
JSON representation
STUN server and client that can send a fixed address
- Host: GitHub
- URL: https://github.com/f4exb/stund
- Owner: f4exb
- License: other
- Created: 2014-04-29T20:00:32.000Z (about 11 years ago)
- Default Branch: master
- Last Pushed: 2014-04-29T20:08:29.000Z (about 11 years ago)
- Last Synced: 2025-03-28T01:46:38.432Z (about 1 month ago)
- Language: C++
- Size: 195 KB
- Stars: 9
- Watchers: 2
- Forks: 6
- Open Issues: 0
-
Metadata Files:
- Readme: README
- License: license.txt
Awesome Lists containing this project
README
STUN server and client. The server has the option to reply with a fixed (fake) mapped address to any request.
This option is useful when you work with a fixed address on the "public" side but you cannot reach a
STUN server. For example the mesh network through which you want to route SIP calls are using routers
that cannot support a STUN server.
Originally the code also accepted a single address; -a argument is optional just issuing a warning.
Here is the server help describing all options:
STUN server version 0.9f
Usage:
./server [-v] [-h] [-h IP_Address] [-a IP_Address] [-f IP_Address] [-p port] [-o port] [-m mediaport]
If the IP addresses of your NIC are 10.0.1.150 and 10.0.1.151, run this program with
./server -v -h 10.0.1.150 -a 10.0.1.151
STUN servers need two IP addresses and two ports, these can be specified with:
-h sets the primary IP
-a sets the secondary IP
-f sets the fake mapped IP
-p sets the primary port and defaults to 3478
-o sets the secondary port and defaults to 3479
-b makes the program run in the backgroud
-m sets up a STERN server starting at port m
-v runs in verbose mode
And the client:
STUN client version 0.9f
Usage:
./client stunServerHostname [testNumber] [-v] [-p srcPort] [-i nicAddr1] [-i nicAddr2] [-i nicAddr3]
For example, if the STUN server was larry.gloo.net, you could do:
./client larry.gloo.net
The testNumber is just used for special tests.
test 1 runs test 1 from the RFC. For example:
./client larry.gloo.net 0