Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/fabe/interval

😴 Tracking sleep with a Raspberry Pi and the MPU6050.
https://github.com/fabe/interval

accelerometer nodejs physical-computing raspberry-pi sleep

Last synced: 2 months ago
JSON representation

😴 Tracking sleep with a Raspberry Pi and the MPU6050.

Awesome Lists containing this project

README 

        
# interval



This is a project for a class at the [University of Applied Sciences Potsdam](http://interface.fh-potsdam.de/showcase/). The goal was to create an IoT-Device, preferably with NodeJS and Johnny Five. The two-week long class was supervised by [Fabian Morón Zirfas](https://github.com/fabiantheblind).



*Interval* is a sleep tracker that grabs values from an accelerometer (in this case the MPU6050) and visualizes movement throughout the night. Tracking can be started and ended via a website that runs on NodeJS, which is also the place where the visualization happens.



## Hardware

For this project, I’ve used a [Raspberry Pi A+](https://www.raspberrypi.org/products/model-a-plus/) hooked up with an [Edimax WiFi USB Adapter](http://amzn.com/B003MTTJOY). The accelerometer in use is the [MPU-6050](http://amzn.com/B008BOPN40). See the [Fritzing Sketch for correct installation](http://i.imgur.com/hGOfs6k.jpg).



I attached the accelerometer to a wooden board for more accurate tracking and placed it next to my pillow. See the prototype below:



![](http://i.imgur.com/GIVh0hq.jpg)



The final product would be invisible and hidden underneath the sheets/bed.



## Software

NodeJS and MongoDB is running on the Raspberry Pi. I get the accelerometer data through the (specific) [mpu6050 module](https://github.com/jstapels/mpu6050/). For installation instructions I collected some [helpful links](#helpful-links) below.



I set up [forever](https://github.com/foreverjs/forever) on my Raspberry Pi so that my server is always up and running. Otherwise just use `npm start` to start. Make sure that the database is running (`sudo mongod start` or `sudo /etc/init.d/mongod start`).



Communication between frontend and backend happens either via AJAX (for data) or socket.io (for starting/ending tracking).



If you want to change the styling of the page please use [Compass](http://compass-style.org/) via the `comapass watch` command in the root of the project. The stylesheets can be found in the `/sass` directory. Output is in `/public/css`.



For templating [Jade](http://jade-lang.com/) is used, the views are located in `/views`.



Also, run `bower install` to get all frontend components (located in `/public/components`)!



## Screenshot

As stated before, tracking can be started and ended on the website. The visualization also happens there. The higher the values, the lighter is the sleep at that time. Low values indicate a deep sleep phase.

![](http://i.imgur.com/8URxoBU.png)

![](http://i.imgur.com/RbOPvCf.jpg)



## Concerns and Outlook

Unfortunately the visualization and tracking of the accelerometer data is not as accuate and unambiguous as I’ve hoped, so there is definitely some work to do.



I could imagine interesting addtions to the hardware, such as sensors for air quality, temperature, brightness, or even more accelerometers that are attached to the body. Autonomous starting and ending of the tracking could be a cool feature on the software side.



## Helpful Links

- [Install NodeJS on Raspberry Pi](https://www.bitpi.co/2015/02/12/install-nodejs-on-raspberry-pi/)

- [Installing mongodb on Raspberry Pi (using pre-compiled binaries)](http://www.widriksson.com/install-mongodb-raspberrypi/)

- [Raspberry Pi MongoDB Installation – The working guide!](http://c-mobberley.com/wordpress/2013/10/14/raspberry-pi-mongodb-installation-the-working-guide/)

- [Interfacing Raspberry Pi and MPU-6050](http://blog.bitify.co.uk/2013/11/interfacing-raspberry-pi-and-mpu-6050.html)

- [Reading data from the MPU-6050 on the Raspberry Pi](http://blog.bitify.co.uk/2013/11/reading-data-from-mpu-6050-on-raspberry.html)

- [General Information on Accelerometers](http://www.hobbytronics.co.uk/accelerometer-info)

- [MPU6050 module for node-i2c (fixed version)](https://github.com/miniben-90/mpu6050/commit/1c8d08444944367018d463c27217ca0159fa142d)

- [MPU6050 calculations from johnny-five](https://github.com/rwaldron/johnny-five/blob/06b5127d54ec2874910e8d505ed897bc339c9e58/lib/accelerometer.js)

- [How do I backup my Raspberry Pi?](http://raspberrypi.stackexchange.com/a/312)



## License

The MIT License (MIT)



Copyright (c) 2015 Fabian Schultz



Permission is hereby granted, free of charge, to any person obtaining a copy

of this software and associated documentation files (the "Software"), to deal

in the Software without restriction, including without limitation the rights

to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:



The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.



THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.