https://github.com/feldim2425/waveform-scripts
Scripts for Digilent Waveforms
https://github.com/feldim2425/waveform-scripts
Last synced: about 1 year ago
JSON representation
Scripts for Digilent Waveforms
- Host: GitHub
- URL: https://github.com/feldim2425/waveform-scripts
- Owner: feldim2425
- License: mit
- Created: 2020-06-08T12:48:51.000Z (about 6 years ago)
- Default Branch: master
- Last Pushed: 2020-06-09T15:57:51.000Z (about 6 years ago)
- Last Synced: 2025-01-27T21:33:17.443Z (over 1 year ago)
- Language: JavaScript
- Size: 11.7 KB
- Stars: 2
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# WaveForms Scripts
These scripts are meant for the [Digilent WaveForms](https://store.digilentinc.com/waveforms-download-only/) software.
The Scripts are primarily developed for the Digilent AnalogDiscovery2 with the BNC Adapter.
## Disclaimer
This project is not associated with Digilent. I am not sponsored and/or a partner / employee of Digilent.
I also take no responsibility for damages that might occur when using these scripts. Use them at your own risk.
The scripts are nor meant for commercial purposes, I allow usage for commercial purposes, but won't give any guarantee.
## Usage
1. You need a WaveForms compatible device. I use a Digilent AnalogDiscovery2 with the BNC Adapter.
2. Download the latest version of Digilent WaveForms from the [official Website](https://store.digilentinc.com/waveforms-download-only/).
3. Open WaveForms and open a Script Tab by choosing "Script" in the menu on the left side of the "Welcome"-Screen.
4. Copy & Paste the content of the Script (depending on what script you want to use) in the Script editor.
5. Follow the comments/instructions inside the script and setup the software and run it.
## Scripts
Current Scripts:
* ``Capacitance.js`` - (NOT TESTED!) Is a script to automatically measure and calculate the capacitance of a unpolarized capacitor in an RC (Resistor-Capacitor) voltage divider.
* ``Inductance.js`` - Is a script to automatically measure and calculate the inductance of an inductor in an RL (Resistor-Inductor) voltage divider.
## Addendum
You can post issues and pull-requests, and while I will look at them and might fix some issues and accept pull requests, it is not a project I will take much care of.
They are mostly written by me for me, so I will not modify them for a more general use case and I will most likely not take requests for scripts.
Feel free to fork the project and issue pull-requests if you think a script can be improved.