Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/flock4h/freeway

WiFi Penetration Testing & Auditing Tool
https://github.com/flock4h/freeway

3way beacon-flood cybersecurity-tools deauthentication-attack deauther freeway hacking handshake-capture network-monitor packet-injection pmkid-attack python scapy wifi-hacking wifi-monitor wifi-password-stealing wifi-penetration-testing wifi-pentesting wifi-security

Last synced: 6 days ago
JSON representation

WiFi Penetration Testing & Auditing Tool

Awesome Lists containing this project

README 

        


  Freeway logo



  **Freeway for Network Pentesting**









Read the article about Freeway, now on

Medium







> [!NOTE]

> User will not be prompted to accept EULA anymore!
Therefore, by downloading the software, user automatically agrees to follow every guideline specified in EULA section below.



1. Overview



**Freeway** is a Python scapy-based tool for WiFi penetration that aim to help ethical hackers and pentesters develop their skills and knowledge in auditing and securing home or enterprise networks.



2. Features



- IEEE 802.11 Packet Monitoring

- Deauthentication Attack

- Beacon Flood

- Packet Fuzzer

- Network Audit

- Channel Hopper

- Evil Twin

- Packet Crafter



Description of the features can be found in Section 6



3. Preparation



It is **necessary** to have:

- A network adapter supporting monitor mode and frame injection.

- An operating system running a Linux distribution.

- Python 3+ installed.



Optionally, install Scapy and Rich packages for Python if not installing via pip (see Section 4)



4. Setup



**Option A**: Install via PyPi (**RECOMMENDED**)



```

  $ sudo pip install 3way

```



**Option B**: Install or run manually



First, clone the repository:



    git clone https://github.com/FLOCK4H/Freeway



Navigate to the cloned repository:



    cd Freeway



Option 1: Install dependencies, folders, and Freeway. (**RECOMMENDED**)



This will allow to launch the tool from anywhere



    sudo pip install .



Option 2: Run without installation using Python.



Must be called from the /Freeway directory



    sudo pip install scapy rich

    sudo python Freeway



5. Usage



This tool comes with its own **command line interface (CLI)** and can be run without specifying any additional arguments.



Click to expand the CLI usage





    sudo Freeway



Follow the prompt to select the network adapter (see Section 3):



> [!TIP}

> These screenshots show Freeway in its very first iteration, these do not reflect how software looks now, and are to change in the future. 



![image](https://github.com/FLOCK4H/Freeway/assets/161654571/653c9304-3256-4444-8f3f-0677134c8af8)



Select the feature and parameter(s):



![image](https://github.com/FLOCK4H/Freeway/assets/161654571/2444922e-6f1b-4958-99ea-df7463b912cb)

![image](https://github.com/FLOCK4H/Freeway/assets/161654571/757b5d77-be12-4dda-a957-3c305789bba7)







And with the **additional arguments**, to skip the CLI partially or completely.



Click to expand the arguments usage





    sudo Freeway -i wlan2 -a monitor -p 1,2,a



'-p' is not required with '-a', e.g., this will prompt for parameters to specify in the CLI:



    sudo Freeway -i wlan2 -a deauth



**All arguments, actions, and parameters:**






  Arguments:

  -h, --help     Show the help message. 


  -i, --inf      Specify the WLAN interface (e.g., wlan0, wlan1). 


  -a, --action   Action number or alias (e.g., 1 or monitor). 


  -p, --params   Parameter identifiers (e.g., 1,2,a or 3rtv, depends on action). 



  Actions:

  1 or monitor,

  2 or deauth,

  3 or beacon_spam,

  4 or fuzzer,

  5 or audit,

  6 or hopper,

  7 or eviltwin

  8 or packet_crafter



  Parameters must be provided in the same format as in the CLI, specific for every action.

  To list all parameters for a given action, just provide -a argument without -p.






6. Details



- **Packet Monitor** - Sniffs the WiFi packets in the air, analyze them and return the result onto the python's curses display. Catches SSIDs, MACs, Clients, Uptime, Channel, Signal (dBm), Encryption and resolves manufacturer. Catches PMKIDs in hashcat crackable format, and 4-way Handshakes, as well as other EAPOL packets. Logs the captured session to the **/caps** folder or every captured packet if _Save output_ was selected.

- **Deauthentication Attack (Deauthing)** - Disconnects a device from the network by sending a packet containing AP1 address, device address (or broadcast for _Mass Deauthing_) and the deauthentication frame with a reason of kicking the client(s). In case where a device address is a broadcast address, the AP will in most cases disconnect all clients at once. Freeway creates separate thread for every AP or client found in order to make deauthing maximally efficient.

- **Beacon Flood Attack** - Floods the nearby WiFi scanners with fake or malformed APs. It can cause the devices looking for WiFi to behave abnormally (e.g. crash, freeze, drain the battery or run slower) and disrupt the nearby network traffic. User is able to specify his own ssid list, use the default one and generate correct (but random) or malformed beacon packets.

- **Packet Fuzzer** - Fuzzing is a technique of network vulnerability assesment by sending a wide array of malformed or semi-random data to network interfaces and observing the responses. Freeway covers: **Replay captured packets (RX&TX2)**, **Spam CTS/RTS or Probe requests** and **Flood an AP with Authentication or Association Frames**. Devices that will capture fuzzed packets will behave differently depending on vulnerability level of receiver (!USE WITH CAUTION!).

- **Network Audit** - Gathers all possible information about specific network and returns them onto the curses view. Tracks all clients signal and last activity, as well as resolve the manufacturer.

- **Channel Hopper** - Changes the current channel of the network adapter. Helpful in making specific attacks more successful.

- **Evil Twin** - Hosts a legitimate Access Point with Captive Portal, this 'legitimate' AP asks user for login/ bank credentials, or to download malware. First, there's a normal AP created, most times with an ESSID and MAC of existing network. Then, we host our captive portal (e.g., login website), so a normal web server, that reroutes users to our `index.html` trying to associate with the network we spoof.

- **Packet Crafter** - Allows to construct proper .11 frames, modify them with custom values, and send in the air using multiple interfaces on a custom number of threads. Useful for quick packet delivery, educational activities, or threaded/ multi-node penetration. All encapsulated in a user-friendly interface with prompt-after-prompt typing. 



1**Access Points**



2**Transceive and receive at the same time**



7. Uninstall



In case where Freeway doesn't meet the expectations and was installed via pip, the removal process is as easy:



    sudo pip uninstall 3way



EULA



**1)** Users must strictly adhere to local legal guidelines



**2)** Users must not disrupt, introduce chaos, cause damage to others, or to other devices in any circumstances



**3)** Redistribution of this software must comply with MIT license standards



**4)** The author disclaims all liability for any damage caused by the use of this software



**5)** In the event of an investigation, the author will not provide assistance to any parties



**Remember, the purpose of Freeway is to identify vulnerabilities, not to exploit them!**



TODO



✅ Evil Twin attack



✅ Version & update checker



✅ PyPi Release



✅ Packet Crafter



❎ Freeway v1.5



Changelog



> 19.05

> 1. Fixed rare RuntimeError in deauth.py caused by iterating on dynamicly changing size dictionary

> 2. Further improvements of beacon packet formatting in beacon_spam.py



> 27.05

> 1. Added `updater.py`

> 2. Added `evil_twin.py`

> 3. Added `/templates` folder

> 4. Added Evil Twin to actions list

> 5. Updated README.md

> 6. PyPi Release



> 3.06

> 1. Added `git_downloader.py`

> 2. Updated `beacon_spam`

> 3. Updated `evil_twin`



> 27.06

> 1. Removed `EULA` from script

> 2. Added `EULA` to `README.md`

> 3. Added `pkt_crafter.py`

> 4. Modified `Freeway` script



Known Issues



> 1. Android filters out fake beacon frames (works for Android 5, doesn't on Android 11+, versions below Android 11  and above Android 5 were not tested.)

> 2. EvilTwin needs a second adapter connected to the internet (not really an issue), to be able to reroute traffic

> 3. The very first run of the EvilTwin may not succeed if dnsmasq wasn't ever ran on the machine, run EvilTwin twice, or install and run dnsmasq before.



Legal Note



> [!IMPORTANT]

> Any malicious use of such features should be considered a crime, 


> always assert permission to perform the penetration testing.



License



The distribution of Freeway is regulated by the standard MIT license, users can feel free to use, share and contribute to the repository or report bugs.