https://github.com/foosel/sonosremote

A remote for Sonos installations running on an ESP8266 and using Sonos HTTP API
https://github.com/foosel/sonosremote

esp8266 micropython sonos wemos-d1-mini

Last synced: 2 months ago
JSON representation

A remote for Sonos installations running on an ESP8266 and using Sonos HTTP API

• Host: GitHub
• URL: https://github.com/foosel/sonosremote
• Owner: foosel
• License: mit
• Created: 2019-11-03T17:47:36.000Z (about 5 years ago)
• Default Branch: master
• Last Pushed: 2022-02-16T21:32:28.000Z (almost 3 years ago)
• Last Synced: 2024-05-02T01:13:35.631Z (8 months ago)
• Topics: esp8266, micropython, sonos, wemos-d1-mini
• Language: Python
• Size: 3.29 MB
• Stars: 53
• Watchers: 8
• Forks: 5
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE.md

Awesome Lists containing this project

README

        
# SonosRemote

Sonos remote control based on an ESP8266, a rotary encoder, MicroPython and [Sonos HTTP API](https://jishi.github.io/node-sonos-http-api/).

![The finished remote](./picture.jpg)

## Features

  * Control playback and volume with one knob

    * Volume up/down on cw/ccw rotation of encoder

    * Toggle play/pause on single press

    * Next track on double press

    * Previous track on long press

  * Activity LED on sent commands

  * Configurable via provisioning file

  * Syslog support for info/debug logging

  * Implemented based on asyncio

## BOM/Prerequisits

  * Wemos D1 Mini

  * KY-040 rotary encoder breakout

  * Existing and configured install of [Sonos HTTP API](https://jishi.github.io/node-sonos-http-api/) (e.g. in a Docker container).

  * 3d printed case & knob

  * 2 x M3x10mm screws

## Setup

The firmware files can be find in the `src/` folder.

  * If not already done, install [Sonos HTTP API](https://jishi.github.io/node-sonos-http-api/) somewhere on your network. This is mandatory.

  * Flash current version of MicroPython to the Wemos D1 Mini as described [here](https://docs.micropython.org/en/latest/esp8266/tutorial/intro.html)

  * Create a `sonos_remote_config.py` for your target network, room and pin assignment. An example is provided which assumes the following wiring for the rotary encoder:

    * CLK to D6 aka pin 12

    * DT to D7 aka pin 13

    * SW to D5 aka pin 14

  * Copy `main.py`, `sonos_remote_config.py` and the whole `lib/` folder to the Wemos D1 Mini. You can use `ampy`, `rflash` or similar to do this.

  * Reset the board and test. 

## Case

STLs for printing a case are provided in the `stls/` folder.

Please note:

  * `case_bottom.stl` needs support from the build plate

  * `case_top.stl` needs to be flipped to lie flat, no supports needed